ページ1に含まれる内容の要旨
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
10' x 10'
Pop Up Canopy
ITEM 69456
visit our website at: http://www.harborfreight.com
emai
ページ2に含まれる内容の要旨
Specifications 10 FT x 10 FT at base Dimensions 8 FT x 8 FT at canopy Canopy 150 Denier Polyester important Safety information 1. Setup only according to these 8. Anchor securely to flat, level, solid instructions. Improper setup surface able to support shelter and can create hazards. vehicle according to manual instructions. 2. Wear ANSI-approved safety goggles 9. Inspect before setup and every during setup. Wear heavy-duty work use; do not setup or use if gloves when working with frame pa
ページ3に含まれる内容の要旨
Setup instructions Read the entiRe impoRtant SaFety inFoRmation section at the beginning of this document including all text under subheadings therein before set up or use of this product. 1. Place the Frame in the center of the desired location. With two people standing opposite each other, lift the Frame and pull it several feet apart. Caution! Be careful not to pinch fingers or hands as you pull the Frame into shape. 2. Open the Frame completely and engage the Slider
ページ4に含まれる内容の要旨
4. Extend the Inner Legs until the pins click into place to raise the Canopy to its desired height. 5. Attach the hook and loop strips to each corner and overhead Trusses. 6. Secure the bottom of each Leg using sandbags (not included) or the included Ground Anchors. Page 4 For technical questions, please call 1-800-444-3353. Item 69456
ページ5に含まれる内容の要旨
t ake Down instructions Read the entiRe impoRtant SaFety inFoRmation section at the beginning of this document including all text under subheadings therein before set up or use of this product. 1. Remove anchors or sandbags from legs. 2. Push in the Pins on the legs and lower the Inner Legs to lower the Canopy Frame. 3. Disengage the Locking Button at each corner of the Frame and pull the Slider down slowly until the button is completely free of the Slider. locking Butto
ページ6に含まれる内容の要旨
parts list and Diagram pleaSe ReaD the Following CaReFully THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROvIDED THE PARTS LIST AND ASSEMBLy DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANy REPRESENTATION OR WARRANTy OF ANy KIND TO THE BUyER THAT HE OR SHE IS qUALIFIED TO MAKE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS qUALIFIED TO REPLACE ANy PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR ExPRESSLy STATES THAT ALL R
ページ7に含まれる内容の要旨
Diagram Record Serial number here: note: If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 69456 For technical questions, please call 1-800-444-3353. Page 7
ページ8に含まれる内容の要旨
limited 90 Day w arranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installati