ページ1に含まれる内容の要旨
T E C H N O L O G I E S
User Guide
Pocket eSATA/USB DigiDrive
(AEPDDESU, AEPDDESUWP, AEPDDESUWP-X)
www.addonics.com
v7.1.11
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
ページ2に含まれる内容の要旨
Mode switch Mini USB port (M1 or M2) eSATA port 5V power connector Mode Switch: Note: Only applies on eSATA connection I. Setting up the device in eSATA mode a. Connect USB power cable from PC to the eSATA / USB DigiDrive. b. Attach eSATA cable from eSATA / USB DigiDrive to the PC eSATA port. The tables show drive icon and media detection behavior basing on the mode switch setting and the type of eSATA port the eSATA / USB DigiDrive is connected to. M1
ページ3に含まれる内容の要旨
II. Setting up the device in USB Mode a. Attach mini USB cable from eSATA / USB DigiDrive to USB port on PC. b. The drive icon appears only when flash media is inside the eSATA / USB DigiDrive.The drive icon will disappear and reappear during media change. Note for AEPDDESUWP: If an unformatted flash media is use, no drive icon will show up in My Computer. Note for AEPDDESUWP-X: If an unformatted flash media is use, no drive icon will show up in My Computer. Media Prior
ページ4に含まれる内容の要旨
CONTACT US www.addonics.com Phone: 408-573-8580 Fax: 408-573-8588 Email: http://www.addonics.com/sales/query/
