ページ1に含まれる内容の要旨
T E C H N O L O G I E S
User Guide
Cipher Z-Drive Enclosure
(ZESAES256 / ZSAES256EU)
www.addonics.com
v3.1.11
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
ページ2に含まれる内容の要旨
CipherChain Cipher eSATA HDD PWR (to host) RESET Front Removable Cover Power and Drive Activity LED Removing the front panel: You can remove the front panel of the enclosure to access the drive drawer of the SATA drive. Secure Drive Hard drive installation: Here 1. Loosen the two screws from the rear panel. Pull out the interior tray from the enclosure. 2. Connect the 15-pin SATA power cable to the power connector of the hard drive. Also connect the 7-pin SATA data cable to SATA port o
ページ3に含まれる内容の要旨
Back Fan Switch CipherChain CipherChain Cipher eSATA HDD PWR (to host) RESET Power Connector eSATA Port CipherChain Power LED Cipher HDD LED eSATA PWR HDD (to host) RESET Cipher Keyhole Reset Switch How to operate the Cipher Z-Drive Enclosure: Note: Hot swapping refers to the ability to plug and unplug the component without rebooting. 1. Insert the AES 256-bit cipher key into the cipher keyhole on the Cipher Z-Drive Enclosure. 2. Power on the device. 3. Observe that the gr
ページ4に含まれる内容の要旨
Reset switch Under certain applications, the RESET button enables the connecting and disconnecting of the Cipher Z-Drive Enclosure without restarting the system. Following are examples of such applications: a. When the cipher key is removed from the Z-Drive Enclosure, pressing the reset switch will clear the key code and remove the drive icon. This is good for security when the Z-Drive Enclosure is left unattended. b. Likewise when the Z-Drive Enclosure is connected and powered on with
