ページ1に含まれる内容の要旨
Performance Hardware
User’s Guide
C o r s a i r A i r f l o w P R O
Q u i c k I n s t a l l G u i d e
A pictorial step-by-step of how to install your new Airflow PRO memory activity
and temperature monitor device.
Version 1.0 March, 2010
ページ2に含まれる内容の要旨
Corsair Airflow PRO Quick Start Guide Remove two screws from the top of 1 your Dominator Airflow Fan Fasten standoffs to screw locations 2
ページ3に含まれる内容の要旨
Corsair Airflow PRO Quick Start Guide The Airflow Pro display device has six separate data leads for the activity LEDs. Turn the module over and locate the appropriate con- 3 nectors for the number of memory modules you have. (Don’t worry, even if you only have two modules, all six LED banks will still light up with peak or average memory activity) Airflow Pro Data Con- nectors (Photo shows 3 cables connected out of possible 6) Airflow Pro Power Connector (cable not connected)
ページ4に含まれる内容の要旨
Corsair Airflow PRO Quick Start Guide Connect the power cable. 4 Turn your Airflow Pro device over and attach it to the Airflow fan by usin the two screws from step 1. 5
ページ5に含まれる内容の要旨
Corsair Airflow PRO Quick Start Guide When attached correctly, the top part of the Airflow Pro sits on the Airflow fan and the bottom is fastened using the thumbscrews that were removed 6 during step 1. Connect the data cables to the DHX Pro connectors on your Dominator Memory. 7
ページ6に含まれる内容の要旨
Corsair Airflow PRO Quick Start Guide Connect the power cable to an available 4-pin molex adapter from your power supply. 8 Power on your system and enjoy the show! 9
ページ7に含まれる内容の要旨
Corsair Airflow PRO Quick Start Guide Resources Corsair Airflow PRO Product Page: http://www.corsair.com/products/airflowpro/default.aspx © June,, 2010, Corsair Memory, Incorporated. All rights reserved. All trademarks and registered trademarks are the property of their respective owners in the United States and/or other countries.
