ページ1に含まれる内容の要旨
SyncMaster 320P
ページ2に含まれる内容の要旨
Model Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for an extended period of time, set your computer to DPMS. If using a screen saver, set it to active screen mode. Do not use a dama
ページ3に含まれる内容の要旨
This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose. A bad connection may cause fire. Do not bend the plug excessively and wire nor place heavy objects upon them, which could caus
ページ4に含まれる内容の要旨
location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc. Failure to do so may cause serious damage to your monitor. Place your monitor in a location with low humidity and a minimum of dust. Failure to do so may cause electric shock or fire inside the monitor. Do not drop the monitor when moving it. This may cause damage to the product or the person carrying
ページ5に含まれる内容の要旨
Failing to do so may damage the monitor. Do not place the monitor face down. This may damage the TFT-LCD surface. The installation of the bracket must be done by a qualified professional. Installing the bracket by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual. When installing the product, make sure to keep it away from the wall (more than 10 cm/4 inches) for ventilation purposes. Poor ventilation may cause
ページ6に含まれる内容の要旨
A dirty connector may cause electric shock or fire. Make sure to unplug the power cord before cleaning the product. Otherwise, this may cause electric shock or fire. Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. Contact the SAMSUNG customer care center or Customer Center for interior cleaning once a year. Kee
ページ7に含まれる内容の要旨
Disconnect the plug from the outlet during storms or lightning or if it is not used for a long period of time. Failure to do so may cause electric shock or fire. Do not try to move the monitor by pulling only the wire or the signal cable. This may cause a breakdown, electric shock or fire due to damage to the cable. Do not move the monitor right or left by pulling only the wire or the signal cable. This may cause a breakdown, electric shock or fire due to damage to the
ページ8に含まれる内容の要旨
Adjust the resolution and frequency to the level appropriate for the model. An inappropriate resolution may cause undesirable picture quality. 32 inch (80 cm) - 1360 X 768 Viewing the monitor continuously at a too close angle may result in damage to your eyesight. To ease eye strain, take at least a five-minute break after every hour of using the monitor. Do not install the product on an unstable, uneven surface or a location prone to vibrations. Dropping the product may
ページ9に含まれる内容の要旨
do not swallow the batteries. Keep the batteries out of children's reach. If the batteries are swallowed, see a doctor immediately. When replacing batteries, place the batteries in the correct +/- polarity position as indicated on the battery holder. The incorrect polarity may cause a battery to break or leak and may cause fire, injury, or contamination (damage). Use only specified standard batteries. Do not use new and used batteries together. This may cause a battery to bre
ページ10に含まれる内容の要旨
Model Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. This stand is not for the Floor Standing Type. Unpacking Monitor Manual Warranty Card User's Guide, MDC software, Quick Setup Guide (Not available in all locations) Natural Color software Cable
ページ11に含まれる内容の要旨
D-Sub Cable Power Cord Speaker Wire Cable Sold separately Wall Mount KIT Speaker Set Stand KIT DVI Cable Other Remote Control Batteries (AAA X 2) Cover-Hole BNC to RCA Semi Stand Adapter Jack
ページ12に含まれる内容の要旨
Front 1.MENU 6.PIP 2. Navigate buttons (Up-Down buttons) 7. Power button 3. Adjust buttons (Left-Right buttons)/ 8. Power indicator Volume buttons 4. ENTER 9. Remote Control Sensor 5. SOURCE 1. MENU Opens the on-screen menu and exits from the menu or closes the screen adjustment menu. 2. Navigate buttons (Up-Down buttons) Moves from one menu item to another vertically or adjusts selected menu values. 3. Adjust buttons (Left-Right buttons) / Volume buttons Moves from one menu
ページ13に含まれる内容の要旨
for long periods. Rear For detailed information concerning cable connections, refer to Connecting Cables under Setup. The monitor's configuration at the back may vary slightly depending on the monitor model. 1. RS232C OUT/IN (RS232C Serial PORT): MDC(Multiple Display Control) Program Port 2. DVI IN(HDCP) (PC Video Connection Terminal) : Using a DVI Cable (DVI-D to DVI-D) - DVI mode (Digital PC) 3. PC IN(RGB) (PC Video Connection Terminal) : Using a D-Sub Cable (15 pin D-Su
ページ14に含まれる内容の要旨
5. COMPONENT AUDIO IN [L-AUDIO-R](Component Audio Connection Terminal (Input)) 6. BNC/COMPONENT OUT (BNC/Component Connection Terminal (Output)) - BNC (Analog PC) Connection : connecting the R, G, H, V ports. R B - Component Connection : connecting the P , Y, P ports 7. BNC/COMPONENT IN (BNC/Component Connection Terminal (Input)) 8. AV AUDIO IN [L-AUDIO-R](Monitor Audio Connection Terminal (Input)) 9. AV OUT [VIDEO](VIDEO Connection Terminal) : AV mode (Output) 10. AV IN [VIDEO](VIDEO
ページ15に含まれる内容の要旨
The Kensington lock is a device used to physically fix the system to something when using it in a public place. (The locking device has to be purchased separately.) For using a locking device, contact the place of purchase. See Connecting the Monitor for further information regarding cable connections. Remote Control The performance of the remote control may be affected by a TV or other electronic device operating near the monitor, causing a malfunction due to int
ページ16に含まれる内容の要旨
1. ON / OFF Turns the monitor On/Off. 2. MAGICNET MagicNet Quick Launch Button. - This fuction does not work for this monitor. 3. MDC MDC Quick Launch Button. 4. LOCK Activates or deactivates all function keys on both the remote control and the monitor except for the Power and LOCK buttons. 5. MagicNet buttons - Used for MagicNet. Alphanumeric: Used to enter the Internet address. DEL : Functions as the backspace. SYMBOL: Used to enter the symbols (.O_-:/
ページ17に含まれる内容の要旨
The current picture information is displayed in the top left corner of the screen. 16. EXIT Exits from the menu screen. 17. Up-Down Left-Right buttons Moves from one menu item to another horizontally, vertically or adjusts selected menu values. 18. P.MODE (M/B) When pressing this button, current picture mode is displayed at the bottom center of the screen. AV / S-Video / Component : P.MODE The Monitor has four automatic picture settings that are preset at the factory. Then
ページ18に含まれる内容の要旨
Mechanical Layout | Monitor Head | Stand | Speaker | Installation VESA Bracket | Wall Bracket Installation 1. Mechanical Layout 2. Monitor Head
ページ19に含まれる内容の要旨
3. Stand 4. Speaker 5. Installation VESA Bracket When installing VESA, make sure to comply with the international VESA standards. Purchasing VESA Bracket and Installation Information : Please contact your nearest Samsung Distributor to place an order. After your order is placed, installation professionals will visit you and install the bracket. At least 2 persons are needed in order to move the LCD Monitor. Samsung is not responsible for any product damage or any injury caused by ins
ページ20に含まれる内容の要旨
For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length. 6. Wall Bracket Installation Contact a technician for installing the wall bracket. Samsung Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. This product is for installing on cement walls. The product may not stay in place when installed on plaster or wood. Components(Sold separately) Only use the component
