ページ1に含まれる内容の要旨
ENGLISH
OWNER’S MANUAL
LED LCD MONITOR
Please read this manual carefully before operating
your set and retain it for future reference.
LED LCD MONITOR MODELS
E1951S E1951T E1951C E2251VR E2251VQ
E2051S E2051T
E2051C E2351VR E2351VQ
E2251S E2251T E2251C
E2351T
E2351TC
www.lg.com
ページ2に含まれる内容の要旨
ENGLISH ENG TABLE OF CONTENTS 2 CONTENTS 3 ASSEMBLING AND 21 SPECIFICATIONS PREPARING 26 Preset Modes (Resolution) 3 Unpacking 27 - HDMI Video Timing 4 Parts and buttons 27 Indicator 6 Setting up the Monitor 6 - Assembling the Stand Body and Base 28 PROPER POSTURE 7 - Mounting on a table 28 Proper posture for using the Monitor. 8 - Detaching the Stand Base and the Stand Body 9 - Mounting on a wall 29 LICENSES 11 USING THE MONITOR 11 Connecting to a PC 11 - D-SUB connection 12 - DVI-D connec
ページ3に含まれる内容の要旨
ENGLISH ENG ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. CD(Owner's Manual) / D-SUB Cable DVI-D Cable Card (This signal cable may be attached (In some countries, this to this product before shipping out.) accessory may not be provided.) Power Cord A
ページ4に含まれる内容の要旨
ENGLISH ENG ASSEMBLING AND PREPARING 4 Parts and buttons Power Indicator y Lighting On: Turned on y Lighting Off: Turned off (Power Button) Button ("CUSTOMIZING SETTINGS" on page 14) E1951S E2051S E2251S E2251VR E2251VQ E1951C E2051C E2251C E2351VR E2351VQ DC-IN / HDMI D-SUB DC-IN / DVI-D D-SUB E1951T E2051T E2251T E2351T E2351TC DC-IN / DVI-D D-SUB Connection panel (See p.11)
ページ5に含まれる内容の要旨
ENGLISH ENG ASSEMBLING AND PREPARING 5 Button Description MENU Accesses the main menus.(See p.15) Left First Button OSD LOCKED/ This function allows you to lock the current control settings, so UNLOCKED that they cannot be inadvertently changed. Press and hold the Left First Button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the Left First Button for several seconds. The message "OSD UNLOCKED" should appear. SUPER+ RESO
ページ6に含まれる内容の要旨
ENGLISH ENG ASSEMBLING AND PREPARING 6 Setting up the Monitor WARNING y If you do not fasten the screws, the monitor Assembling the Stand Body and Base may fall, which may result in damage to the product. Place the Monitor with the screen side down on 1 a flat and cushioned surface. Check the direction of the Stand Base and 4 assemble it with the Stand Body. Using a coin, turn the screw clockwise to secure the Stand Base. Attach the Stand Body from the Monitor. 2 Insert the two Lockers
ページ7に含まれる内容の要旨
ENGLISH ENG ASSEMBLING AND PREPARING 7 Mounting on a table WARNING When you adjust the angle, do not hold the Lift and tilt the Monitor into its upright position 1 bottom of the Monitor frame as shown on on a table. the following illustration, as it may injure your Leave a 10 cm (minimum) space from the wall fingers. for proper ventilation. 10 cm 10 cm 10 cm 10 cm Do not touch or press the screen when adjusting the angle of the monitor. 2 Connect the AC-DC Adapter and Power Cord to a wal
ページ8に含まれる内容の要旨
ENGLISH ENG ASSEMBLING AND PREPARING 8 Using the Kensington security system Detaching the Stand Base and the Stand Body The Kensington security system connector is located at the back of the Monitor. For more Place the Monitor with the screen side down on information of installation and using, refer to the 1 a flat and cushioned surface. manual supplied with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the Monitor
ページ9に含まれる内容の要旨
ENGLISH ENG ASSEMBLING AND PREPARING 9 Please use a VESA standard as below. 5 Mounting on a wall y 784.8 mm (30.9 inch) and under For proper ventilation, allow a clearance of 10 cm * Wall Mount Pad Thickness : 2.6 mm on each side and from the wall. Detailed Φ * Screw : 4.0 mm x Pitch 0.7 mm x instructions are available from your dealer, see the Length 10 mm optional Tilt Wall Mounting Bracket Installation and y 787.4 mm (31.0 inch) and above Setup Guide. * Please use VESA
ページ10に含まれる内容の要旨
ENGLISH ENG ASSEMBLING AND PREPARING 10 CAUTION y Disconnect the power cord first before moving or installing the Monitor. Otherwise electric shock may occur. y If you install the Monitor on a ceiling or slanted wall, it may fall and result in severe injury. y Use only an authorized LG wall mount and contact a local dealer or qualified personnel. y Do not over tighten the screws as this may cause damage to the Monitor and void your warranty. y Use only screws and wall mounts that meet
ページ11に含まれる内容の要旨
ENGLISH ENG USING THE MONITOR SET 11 USING THE MONITOR Connecting to a PC E2251VR E2351VR E2251VQ E2351VQ Your Monitor supports Plug & Play*. y *Plug & Play: A PC recognizes a connected HDMI device that users connect to a PC and turn DC-IN / on, without device configuration or user intervention. DVI-D D-SUB D-SUB connection Transmits analog video from your PC to the Monitor. Connect the PC and the Monitor with the supplied D-sub 15 pin signal cable as shown in the following
ページ12に含まれる内容の要旨
ENGLISH ENG USING THE MONITOR SET 12 DVI-D connection CAUTION Transmits the digital video signal from your PC to the Monitor. Connect the PC and the Monitor y Connect the signal set with the DVI-D cable as shown the following input cable and tighten illustrations. it by turning the screws clockwise. E1951T E2051T E2251T y Do not press the screen with your finger for E2351T E2351TC a long time as this may result in temporary distortion on the screen. DC-IN / y Avoid displaying a fixed imag
ページ13に含まれる内容の要旨
ENGLISH ENG USING THE MONITOR SET 13 Self Image Setting Function HDMI connection Press the power button on the front panel to turn Transmits the digital video and audio signals from the power on. When monitor power is turned on, your PC or A/V to the Monitor. Connect the PC or the "Self Image Setting" Function is executed A/V and the Monitor with the HDMI cable as shown automatically. (Only supported in Analog Mode) in the following illustrations. When the HDMI cable is connected, you ca
ページ14に含まれる内容の要旨
ENGLISH ENG CUSTOMIZING SETTINGS 14 CUSTOMIZING SETTINGS Accessing The Main Menus Press any button on the front of the Monitor to display the MONITOR SETUP OSD menu. 1 Press the desired menu item. 2 3 Change the value of the menu item by pressing the buttons on the front of the Monitor. To return to the upper menu or set other menu items, use the up arrow ( ) button. Select EXIT to leave the OSD menu. 4 Monitor set Buttons MENU (See p.15) AUTO (See p.5) EXIT Sets the screen options. Optimizes
ページ15に含まれる内容の要旨
ENGLISH ENG CUSTOMIZING SETTINGS 15 Customizing Settings MENU Settings MENU BRIGHTNESS 100 Press any button on the front of the Monitor to display the 1 ORIGINAL RATIO WIDE MONITOR SETUP OSD menu. USER COLOR TEMP WARM PRESET Press the MENU button to display the options in the OSD 2 50 RED menu. 50 GREEN BLUE 50 3 Set the options by pressing th e ◄ or ► or ▼ buttons. 70 CONTRAST BLACK LEVEL LOW Select EXIT to leave the OSD menu. 4 LANGUAGE ENGLISH To return to the upper menu or set
ページ16に含まれる内容の要旨
ENGLISH ENG CUSTOMIZING SETTINGS 16 SUPER ENERGY SAVING Settings SUPER ENERGY SAVING Press any button on the front of the Monitor to display 1 the MONITOR SETUP OSD menu. ON OFF RESET 2 Press the MENU button to display the options in the OSD Menu. SUPER SAVING TOTAL POWER REDUCTION: 20 W : 5 W/h Select SUPER ENERGY SAVING by pressing the LED SAVING TOTAL CO2 REDUCTION: 16 g 3 : 12 W/h ▼ button. Enter to SUPER ENERGY SAVING by pressing the 4 OK EXIT ► button. 5
ページ17に含まれる内容の要旨
ENGLISH ENG CUSTOMIZING SETTINGS 17 SUPER+ RESOLUTION SUPER+ RESOLUTION Settings 1 Press any button on the front of the Monitor to display the MONITOR SETUP OSD menu. NORMAL LOW MEDIUM HIGH Press the SUPER+ RESOLUTION button to display 2 the options in the OSD menu. EXIT Set the options by pressing ◄ or ► buttons. 3 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, OK EXIT use the up arrow ( ) button. The available SUPER+ RESOLUTION settings are des
ページ18に含まれる内容の要旨
ENGLISH ENG CUSTOMIZING SETTINGS 18 DUAL PACKAGE DUAL MONITOR ► DUAL MONITOR Settings 1 Press any button on the front of the Monitor to display the MONITOR SETUP OSD menu. Press the DUAL button to display the options in the OSD menu. 2 OFF EXTENDED CLONE Set the options by pressing ▼ and then ◄ and ► buttons. 3 EXIT 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. The available DUAL MONITOR settings are described be
ページ19に含まれる内容の要旨
ENGLISH ENG TROUBLESHOOTING 19 TROUBLESHOOTING Check the following before calling for service. No image appears Is the power cord of the display y Check and see if the power cord is connected properly to the power connected? outlet. Is the power indicator light on? y Press the Power button. Is the power indicator blink? y If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. y Try to turn on the PC. Do you see an "OUT OF RANGE"
ページ20に含まれる内容の要旨
ENGLISH ENG TROUBLESHOOTING 20 Display image is incorrect The screen color is mono or y Check if the signal cable is properly connected and use a screwdriver abnormal. to fasten if necessary. y Make sure the video card is properly inserted in the slot. y Set the color setting higher than 24 bits (true color) at Control Panel ► Settings. The screen blinks. y Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Do you see an "Unrecognized monitor, Plu
