ページ1に含まれる内容の要旨
English
OWNER'S MANUAL
CLOUD MONITOR
Please read the safety information carefully before using the product.
CLOUD Monitor Model
23CAV42K
www.lg.com
ページ2に含まれる内容の要旨
English ENG Table of Contents 2 TABLE OF CONTENTS 3 ASSEMBLING AND 22 TROUBLESHOOTING PREPARING 3 Unpacking 24 PRODUCT SPECIFICATION 4 Parts and buttons 25 Preset Mode 5 Lifting and moving the Monitor 25 Power Indicator 5 Setting Up the Monitor set 5 - Attaching the Stand Base 6 - Detaching the stand base 26 PROPER POSTURE 6 - Detaching the stand body 26 Proper posture for using the monitor 7 - Mounting on a table 7 - Adjusting the stand height 27 USING CLOUD SOLUTION 8 - Adjusting the angle 8 -
ページ3に含まれる内容の要旨
English ENG ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Unpacking Please check whether all the components are included in the box before using the product. If there are missing components, contact the retail store where you purchased the product. Note that the product and components may look different from those shown here. User Manual/Card Power Cord Adaptor 15-pin D-SUB Signal Cable Stand Base CAUTION y Only use an approved LG power adapter. y Damage caused by other power adapters i
ページ4に含まれる内容の要旨
English ENG ASSEMBLING AND PREPARING 4 Parts and buttons Input Connectors (See p.14 ) Power Indicator y LED On : Power is on y LED Off: Power is off (Power Button) EXIT MENU CLOUD AUTO INPUT Front Side Buttons 1 1 Input Connectors (See p.12 to 14)
ページ5に含まれる内容の要旨
English ENG ASSEMBLING AND PREPARING 5 Lifting and moving the Setting Up the Monitor set Monitor Attaching the Stand Base Please heed the following information when moving the monitor. Place the monitor's screen face down. 1 CAUTION CAUTION y To protect the screen from scratches, y Avoid touching the screen at all times, as this cover the surface with a soft cloth. may result in damage to the screen or pixels . Check the position (at the front and rear) of 2 the stand body, then mount the s
ページ6に含まれる内容の要旨
English ENG ASSEMBLING AND PREPARING 6 Detaching the stand base Detaching the stand body Place the monitor's screen face down. Place the monitor's screen face down. To 1 1 protect the screen from scratches, cover the To protect the screen from scratches, cover the surface with a soft cloth. surface with a soft cloth. Using a screwdriver, remove the four screws 2 and detach the stand from the monitor. Using a coin, turn the screw in the stand base 2 counterclockwise. Detach the stand base
ページ7に含まれる内容の要旨
English ENG ASSEMBLING AND PREPARING 7 Mounting on a table Adjusting the stand height Lift the monitor and place it on the table in an Place the monitor mounted on the stand base 1 1 upright position. in an upright position. Install at least 10 cm away from the wall to ensure sufficient ventilation. 2 Remove the tape attached at the bottom rear of the stand body, then pull out the locking pin. 10 cm 10 cm Stand Body 10 cm 10 cm Tape Locking Pin The height can be adjusted up to 130.0
ページ8に含まれる内容の要旨
English ENG ASSEMBLING AND PREPARING 8 Adjusting the angle Using the Kensington locking device Place the monitor mounted on the stand base 1 The connector for the Kensington lock is located in an upright position. on the rear of the monitor. For more information on installation and usage, Adjust the angle of the screen. The angle of 2 refer to the Kensington lock user manual or visit the screen can be adjusted up to 5° forwards the website at http://www.kensington.com. and 15° backward
ページ9に含まれる内容の要旨
English ENG ASSEMBLING AND PREPARING 9 Be careful with the cables when rotating the 3 Swivel stand screen. y Image shown may differ from your Monitor set. Swivel 90 degrees and adjust the angle of the 1 Monitor set to suit your view. Using the Pivot function The pivot function allows you to rotate the screen 90 degrees clockwise. Lift the monitor to its highest height to utilize 1 the Pivot function. 2 Landscape & Portrait : You can rotate the panel 90o clockwise. Please be cautious and
ページ10に含まれる内容の要旨
English ENG ASSEMBLING AND PREPARING 10 Installing the wall mount plate Mounting on a wall This monitor has a VESA compatible mount on the Install the monitor at least 10 cm away from the back. Most mounts will require an LG mounting wall and leave about 10 cm of space at each side plate. of the monitor to ensure sufficient ventilation. De- tailed installation instructions can be obtained from your local retail store. Please refer to the manual Place the monitor's screen face down. To 1 to
ページ11に含まれる内容の要旨
English ENG ASSEMBLING AND PREPARING 11 Model 23CAV42K 100 x 100 VESA (A x B) M4 Stand Screw 4 Required Screw RW120 Wall Mount Plate (Optional) CAUTION y Unplug the power cord before moving or in- stalling the monitor to avoid electric shocks. y Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead to injury. Please use a LG wall mounting bracket when using a VESA mount. For more information, contact your local retail store o
ページ12に含まれる内容の要旨
English ENG USING THE MONITOR SET 12 USING THE MONITOR SET Self Image Adjustment D-SUB IN connection - PC Press the power button on the front to turn on y This monitor supports the *Plug and Play the monitor. When powered on, the "Self Image feature. Adjustment" function will run automatically (only *Plug and Play: A feature that allows you to available for analog [D-SUB input] signals). add a device to your computer, without having to reconfigure anything or install any manual drivers. C
ページ13に含まれる内容の要旨
English ENG USING THE MONITOR SET 13 DVI connection Connecting LAN/Peripherals Transfers digital video signals from the Cloud Mon- LAN connection itor to an extended monitor. Connect the Cloud Monitor to an extended monitor Connect the router or switch to the monitor using a using a DVI cable. LAN cable as illustrated below. DVI-I(D) IN LAN MONITOR Hub/Router CAUTION y Connect the input signal cable and tighten in the NOTE direction of the arrow. To prevent disconnection y The LAN cable is
ページ14に含まれる内容の要旨
English ENG USING THE MONITOR SET 14 Peripheral device connection NOTE Connect peripheral devices to the monitor using y Peripheral devices are sold separately. USB, microphone and headphone ports. y The USB ports on the left and bottom of the monitor can be used to connect the key- board, mouse, and other USB devices. y Cables with angled plugs may have clear- ance issues, use straight plugs when pos- sible. Angle Type Straight Type Left NOTE 1 1 Headphones, speakers or microphone may y no
ページ15に含まれる内容の要旨
English ENG CUSTOMIZING SETTINGS 15 CUSTOMIZING SETTINGS Accessing The Main Menus Press any button on the front of the monitor to display the MONITOR SETUP OSD menu. 1 2 Press to select the desired menu item. To change the settings of the selected item press the buttons on the front of the monitor. 3 To return to the upper menu or set other menu items, use the up arrow ( ) button. Select EXIT to leave the OSD menu. 4 MENU CLOUD AUTO INPUT EXIT Front Buttons Button Description MENU Activate
ページ16に含まれる内容の要旨
English ENG CUSTOMIZING SETTINGS 16 Customizing Settings Menu Settings Press MENU button on the bottom of the Monitor set 1 to display the MENU OSD. 2 Set the options by pressing the ◄ or ► or ▼ buttons. Select the "NEXT MENU" button to enter the more 3 option settings. Select EXIT to leave the OSD menu. 4 To return to the upper menu or set other menu items, use the up arrow ( ) button. VOLUME Each option is explained below. MENU Analog HDMI Description BRIGHTNESS ● ● To adjust the bri
ページ17に含まれる内容の要旨
English ENG CUSTOMIZING SETTINGS 17 PICTURE Press MENU button on the bottom of the Monitor set 1 to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. Enter to PICTURE by pressing the ▼ button. 3 Set the options by pressing the ◄ or ► or ▼ 4 buttons. 5 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. VOLUME MENU > NEXT MENU > PICTURE Description CON
ページ18に含まれる内容の要旨
English ENG CUSTOMIZING SETTINGS 18 COLOR 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. Select the "NEXT MENU" button to enter the more 2 option settings. Select COLOR by pressing the ► button. 3 4 Enter to COLOR by pressing the ▼ button. Set the options by pressing the ◄ or ► or ▼ 5 buttons. Select EXIT to leave the OSD menu. 6 To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. VOLUME MENU
ページ19に含まれる内容の要旨
English ENG CUSTOMIZING SETTINGS 19 DISPLAY Press MENU button on the bottom of the Monitor set 1 to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. Select DISPLAY by pressing the ► button. 3 Enter to DISPLAY by pressing the ▼ button. 4 5 Set the options by pressing the ◄ or ► or ▼ buttons. Select EXIT to leave the OSD menu. 6 To return to the upper menu or set other menu items, y Only available in D-SUB input mode. use the up arrow ( ) button.
ページ20に含まれる内容の要旨
English ENG CUSTOMIZING SETTINGS 20 OTHERS Press MENU button on the bottom of the Monitor set 1 to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. Select OTHERS by pressing the ► button. 3 Enter to OTHERS by pressing the ▼ button. 4 5 Set the options by pressing the ◄ or ► or ▼ buttons. Select EXIT to leave the OSD menu. 6 To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. MENU > N
