ページ1に含まれる内容の要旨
1
E
MB4010T001
N
AutoScan Color Monitor
English Operating Instructions...... 2 - 13
Français Mode d'emploi ……………14 - 25
Appendix
English Declaration FCC ... A1
Information for Users in the U.S. ... A3
Warranty ... A5
Deutsch Hinweis / GS ... A4
Achtung ... A6
Français Declaration FCC ... A2
For Customer Use:
Enter below the Serial No. which is located on the
back of the cabinet. Retain this information for
future reference.
Model No. MB4010T001
Serial No.
CAUTION
RISK OF ELECTRICAL SHOCK
DO
ページ2に含まれる内容の要旨
2 E N Introduction The colour monitor displays sharp and brilliant images of text and graphics with a maximum resolution up to 1024x768 pixels. It is optimal for Windows, spread sheets, and any other application. This monitor automatically scans horizontal frequencies from 30KHz to 54KHz, and vertical frequencies from 50Hz to 110Hz. With microprocessor based digital controlled circuit, the monitor can automatically adjust itself to the video card’s scanning frequency and displays an image with p
ページ3に含まれる内容の要旨
3 E N Note: If you experienced your monitor display is changing from color to mono, it's possible that you are using a non-VESA-DDC-standard video card. Please consult with your local Philips dealer for more information. As an Energy Star Partner, MAGNAVOX, has determined that this product meets the Energy Star guidelines for energy efficiency. IBM, IBM PC and Power PC are registered trademarks of International Business Machines Corporation.
ページ4に含まれる内容の要旨
4 E Safety precautions and maintenance N Disconnect the monitor from the mains supply if the monitor is not to be used for an extended period of time. Do not attempt to remove the back cover, as you will be exposed to a shock hazard. The back cover should only be removed by qualified service personnel. Do not place objects on top of the monitor cabinet, which could fall into vents or which could cover them and prevent proper cooling of the monitor’s electronic devices. Do not expose the
ページ5に含まれる内容の要旨
5 E Installation N Important: Please refer to the user’s manuals of your computer and video adapter to make sure these equipments are properly installed and configured before installing the monitor. Positioning / Ventilation Avoid exposing the monitor to direct sunlight, stoves or any other heat sources. To prevent overheating, make sure that the ventilation openings of the monitor are not covered. Keep moisture and dust away. Keep away from any magnetic objects, such as speakers, electr
ページ6に含まれる内容の要旨
6 E Connection N Important: Please make sure the AC power to your computer is “OFF” before connecting or disconnecting any display peripheral. Failure to do so may cause serious personal injury as well as permanent damage to your computer equipments. Intel Based platform: 386, 486, Pentium, or other compatibles: • Connect the monitor to the computer using the supplied interface cables. Monitor rear view 1) IBM PC connection 2) Mains connection VIDEO IN VIDEO IN 2 1
ページ7に含まれる内容の要旨
7 E Connection to the mains N (Rear of the monitor) VIDEO IN (Mains cord) Connecting to the mains This monitor is set to operate at a mains supply of 100-240 volts AC . If the mains voltage in your home is not between this, consult your dealer. Connect one end of the mains cord to the mains socket at the rear of monitor, and the other end to the mains supply. The monitor will be operating in power saving mode if you switch on your monitor without signal input from PC. (Please refer to Power Mana
ページ8に含まれる内容の要旨
8 E Front Control locations and functions N For an optimized adjustment of the picture following controls are available at the front. POWER. Press this knob, the green LED lights and the power is ON. Press this knob again, the green LED disappears and the power is OFF. CONTRAST Used to adjust the picture contrast level. BRIGHTNESS Used to adjust the overall screen brightness as a compensation for ambient light. "+" or "-" Press "+" or "-" to adjust the selected function.
ページ9に含まれる内容の要旨
9 E The function pads: N H-Shift : to adjust the horizontal position of the image. H-Size : to adjust the horizontal amplitude of the image. V-Shift : to adjust the vertical position of the image. V-Size : to adjust the vertical amplitude of the image. SHIFT key To select the level of function. "Shift" LED off - Control is on first level "Shift" LED on - Control is on second level Second level of the function pads: Trapezoid : to correct the trapezoid distortion of the image. Pincus
ページ10に含まれる内容の要旨
10 E N Adjustment The monitor is pre-set with 8 modes for optimal display size and centering as indicated in the following table: Resolution Horizontal Vertical Mode (dots x lines) Freq.(KHz) Freq.(Hz) Remark VGA 640 x 350 31.5 70 Non-interlaced VGA 640 x 400 31.5 70 Non-interlaced VGA 640 x 480 31.5 60 Non-interlaced VESA/75 640 x 480 37.5
ページ11に含まれる内容の要旨
11 E (B) Power Management Signalling N Power Management Definition VESA DPMS POWER SAVING STATES MODE VIDEO H-SYNC V-SYNC POWER USED POWER SAVING(%) ON Active Yes Yes < 70 Watts 0 % Stand-by Blanked No Yes < 15 Watts > 82 % Suspend Blanked Yes No < 15 Watts > 82 % OFF Blanked No No < 8 Watts > 94 % Note: The video wil
ページ12に含まれる内容の要旨
12 E Technical information N (I) General: Picture tube : 14 inch (35.5 cm), 90° deflection, non- glare, black matrix,light transmission 57%, phosphor P22 medium short, dotted pitch 0.28 mm. Screen area Recommended Display Area: 250 mm (H) x 188 mm (V) Maximum Display Area : 274 mm (H) x 201 mm (V) Line (Horizontal) frequency : 30 - 54 KHz (automatically) Raster (Vertical) frequency : 50 - 110 Hz (automatically) Mains voltage : 100 - 240 VAC , 60 - 50 Hz (automatically) Power consumption : 70 w
ページ13に含まれる内容の要旨
13 E (III) Pin assignment: N 1 5 1 8 10 6 9 15 15 11 (1) (2) (1) The 15-pin D-sub connector (male) of the signal cable (IBM systems): Pin No. Assignment Pin No. Assignment 1 Red video input 9 No pin 2 Green video input 10 Logic ground 3 Blue video input 11 Identification output 4 Identification output - connected to pin 10 - Connected to pin 10 12 Serial data line (SDA) 5 Ground 13 H. Sync 6 Red video ground 14 V. Sync (VCLK for DDC) 7 Green video ground 15 Data clock line (SCL) 8 Blue video
