ページ1に含まれる内容の要旨
Installation and
Start-Up Instructions
EVOLUTION SYSTEM ACCESS MODULE
SYSTMBBSAM01
Cancels: NEW II SAM01-0-1
05-05
This is the safety-alert symbol . When you see this symbol on
the equipment and in the instruction manual, be alert to the
potential for personal injury. Understand the signal words DAN-
GER, WARNING, and CAUTION. These words are used with
the safety-alert symbol. DANGER identifies the most serious
hazards, which will result in severe personal injury or death.
WARNING signifies a ha
ページ2に含まれる内容の要旨
II. COMPONENT LOCATION AND WIRING CONSIDER- If the Red LED is lit solid, then the System Access Module failed ATIONS to send the message. Try a new mounting location for the System Access Module. WARNING: ELECTRICAL SHOCK HAZARD IftheYellowLEDislitsolid,thentheSystemAccessModulesent Failure to follow this warning could result in personal its message but did not receive a reply. The Bryant server may be injury, death, or possible equipment damage. down or the received signal is weak. Try a new mo
ページ3に含まれる内容の要旨
power on. System installation screens will automatically appear Updating System Profile and will display the Equipment Summary screen when finished. The Evolution System will automatically send system information The Equipment Summary screen will display REMOTE ACCESS to Bryant’s computer servers within one hour after the system has near the bottom of the screen. beensuccessfullyinstalled.Accesstothesystemviatheinternetor telephonewillnotbeavailableuntilthisoccurs.Thesystemcanbe If REMOTE ACCESS
ページ4に含まれる内容の要旨
Green Yellow Red Send Message 1 Flash Yellow at 1Hz (short) Green Yellow Red Okay? Failed Flash Yellow at 1Hz and solid Red Green Yellow Red Wait for Reply Flash Green and Yellow (short) at 1 Hz Green Yellow Red Okay? Timeout Flash Green and Yellow at 1Hz and solid Red Green Yellow Red Send Message 2 Flash Yellow 2 times, (short) 1 second off Green Yellow Red Okay? Failed Flash Yellow 2 times and solid Red Green Yellow Red Flash Green and Y
ページ5に含まれる内容の要旨
Antenna Connection PIN LABEL RADIO Home Automation Connection (RS-232) RADIOTEST WLS AUXILIARY WLSC SENSOR A1 STATUS ABC TO B1 COMM1 SYSTEM 1 C1 A2 COMM2 B2 ABC TO 24VAC+ SYSTEM 2 C2 24VAC- SERIAL NUMBER Fig. 3 — System Access Module Control Board A04224 —5—
ページ6に含まれる内容の要旨
© 2006 Bryant Heating & Cooling Systems 7310 W. Morris St. Indianapolis, IN 46231 Printed in U.S.A. IISAM0101si Catalog No. II SAM01-0-1 —6—
