ページ1に含まれる内容の要旨
3-209-590-11(1)
DVD Home
Theatre System
Operating Instructions
HTP-78SS
©2007 Sony Corporation
ページ2に含まれる内容の要旨
For customers in Europe WARNING Disposal of Old Electrical & Electronic Equipment (Applicable in the European To reduce the risk of fire or electric Union and other European countries shock, do not expose this apparatus to with separate collection systems) rain or moisture. To prevent fire, do not cover the ventilation of the This symbol on the product or on its apparatus with newspapers, table-cloths, curtains, packaging indicates that this product etc. And don’t place lighted candles on
ページ3に含まれる内容の要旨
About This Manual Note for the supplied remote The instructions in this manual are for model (RM-AAU017) HTP-78SS. Check your receiver’s model number The VIDEO 3 button on the remote is not by looking at the lower right corner of the front available for receiver operation. panel. The HTP-78SS consists of: Receiver STR-KS1100 DVD player DVP-NS78H a) Speaker system – Front speakers SS-MSP1100 – Center speaker SS-CNP1100 – Surround speakers SS-SRP1100 – Sub woofer SS-WP1100 a) Be sure t
ページ4に含まれる内容の要旨
Table of Contents Getting Started Enjoying Surround Sound Description and location of parts...................5 Enjoying Dolby Digital and DTS Surround sound (AUTO FORMAT DIRECT)....... 37 1: Installing speakers ...................................11 Selecting a pre-programmed sound field .... 39 2: Connecting speakers................................13 Using only the front speakers and sub 3: Connecting the audio/video woofer (2CH STEREO)......................... 41 components................
ページ5に含まれる内容の要旨
Getting Started Getting Started Description and location of parts Receiver Front panel 1 2 3 4 5 MASTER VOLUME DMPORT VIDEO 1 VIDEO 2/BD DVD SAT TV SA-CD/CD TUNER INPUT SELECTOR PRESET TUNING SOUND FIELD MUTING ?/1 AUTO CAL MIC q; 9 8 7 6 Name Function Name Function A ?/1 Press to turn the receiver G MUTING Press to mute the sound (on/standby) on or off (page 20, 27, 28, (page 26). 42). H SOUND FIELD Press to select a sound B Remote sensor Receives signals from +/– field (page 37, 39, 41, 42).
ページ6に含まれる内容の要旨
About the indicators on the display 12 3 4 5 6 7 SLEEP DIGITAL HDMI D.RANGE L CR LFE DTS PL MEMORY RDS SW SL S SR OPT COAX ST MONO qf qd qsqa q; 9 8 Name Function Name Function A LFE Lights up when the disc being F Preset Lights up when using the played back contains an LFE station receiver to tune in radio stations (Low Frequency Effect) channel indicators you have preset. For details on and the LFE channel signal is presetting radio stations, see actually being reproduced. page 44. B SLEEP
ページ7に含まれる内容の要旨
Getting Started Rear panel 12 3 SPEAKERS AM HDMI DVD IN VIDEO 2/BD IN OUT DIGITAL L L R R OPT IN OPT IN COAX IN AUDIO IN AUDIO IN AUDIO IN FRONT R FRONT L SUR R SUR L CENTER SUBWOOFER ANTENNA SAT VIDEO 2/BD DVD SA-CD/CD TV VIDEO 1 DMPORT 4 A ANTENNA section C SPEAKERS section FM Connects to the FM Connects to speakers ANTENNA wire antenna (page 13). jack supplied with this receiver (page 19). AM Connects to the AM ANTENNA loop antenna D AUDIO INPUT section terminals supplied with this AUDIO
ページ8に含まれる内容の要旨
Name Function Remote commander A TV ?/1 Press TV ?/1 and TV (M) at You can operate the receiver with the supplied (on/standby) the same time to turn the TV on or off. remote. You can also use the remote to control the Sony audio/video components that the AV ?/1 Press to turn on or off the Sony remote is assigned to operate (page 49). (on/standby) audio/video components that the remote is assigned to operate. RM-AAU017 If you press ?/1 (B) at the same time, it will turn off the receive
ページ9に含まれる内容の要旨
Getting Started Name Function Name Function D MOVIE Press to select sound fields L TV CH +/– Press TV CH +/– and TV (M) (MOVIE). at the same time to select preset TV channels. MUSIC Press to select sound fields (MUSIC). PRESET +/– Press to select – preset stations. A.F.D. Press to select A.F.D. mode. – preset channels of the VCR or satellite tuner. 2CH Press to select 2CH STEREO mode. b) ./> Press to skip a track of the CD player, DVD player or Blu- E AMP MENU Press to display the menu of
ページ10に含まれる内容の要旨
Name Function Name Function x O RETURN/ Press to S >10/ Press to select EXIT O – return to the previous menu. – track numbers over 10 of the – exit the menu while the VCR, satellite tuner or CD menu or on-screen guide of player. the VCR, DVD player, – channel numbers of the satellite tuner or Blu-ray Digital CATV terminal. disc player is displayed on -/-- Press -/-- and TV (M) at the the TV screen. same time to select the Press RETURN/EXIT O channel entry mode, either and TV (M) at the s
ページ11に含まれる内容の要旨
Getting Started 1: Installing speakers This receiver allows you to use a 5.1 channel Installing the speakers on a flat speaker system. To fully enjoy theater-like surface multi channel surround sound requires five speakers (two front speakers, a center speaker, Before you install the speaker and sub woofer, and two surround speakers) and a sub woofer be sure to attach the supplied foot pads to (5.1 channel). prevent vibration or movement as shown in the illustration below. Example of fr
ページ12に含まれる内容の要旨
3 Hang the speakers on the Installing the speakers on the screws. wall Example of installing the speakers on You can install your speakers on the wall. the wall Hook on the back of the speaker 1 Prepare screws (not supplied) that are suitable for the hook on 4.5 mm the back of each speaker. See the illustrations below. 4 mm more than 25 mm 4.5 mm Notes Hook on the back of the speaker Use screws that are suitable for the wall material and strength. As a plaster board wall is especially
ページ13に含まれる内容の要旨
Getting Started 2: Connecting speakers B A F A A SPEAKERS DVD IN VIDEO 2/BD IN OUT L L R R AUDIO IN AUDIO IN AUDIO IN FRONT R FRONT L SUR R SUR L CENTER SUBWOOFER SA-CD/CD TV VIDEO 1 DMPORT A A A E D C a) A Speaker cord (supplied) AFront speaker (Left) Note on speakers BFront speaker (Right) To connect the speakers correctly, be sure to CCenter speaker check the type of speakers by referring to the speaker label* at the rear panel or bottom of DSurround speaker (Left) the speakers. ESurround
ページ14に含まれる内容の要旨
Connecting audio components 3: Connecting the audio/ The following illustration shows how to video components connect audio components such as Super Audio CD player or CD player. How to hook up your Super Audio CD player/ components CD player This section describes how to hook up your Audio signal components to this receiver. Before you begin, refer to “Component to be connected” below for the pages which describe how to connect the audio/video components. After hooking up all your compo
ページ15に含まれる内容の要旨
Getting Started If you connect a DVD recorder Connecting video components Be sure to change the factory setting of the DVD input button on the remote so that you The following illustration shows how to can use the button to control your DVD connect video components such as DVD recorder. For details, see “Changing button player, DVD recorder, satellite tuner or VCR. assignments” (page 49). Satellite tuner/Set-top box Blu-ray disc player TV Audio signal Audio signal Audio signal AB A SPEAKER
ページ16に含まれる内容の要旨
Notes You cannot do recording on the DVD recorder or VCR via this receiver. For details, refer to the operating instructions supplied with the DVD recorder or VCR. To input multi channel digital audio from the DVD player, set the digital audio output setting on the DVD player. Refer to the operating instructions supplied with the DVD player. As this receiver does not have analog audio input jack for DVD, connect your DVD player to the DIGITAL DVD COAX IN jack on the receiver. To o
ページ17に含まれる内容の要旨
Getting Started Connecting components with HDMI jacks HDMI is the abbreviated name for High- Definition Multimedia Interface. It is an interface which transmits video and audio signals in digital format. DVD player Blu-ray disc player TV, projector, etc. Audio signal Audio/video Audio signal Audio/video Audio/video signal signal signal ACBB B SPEAKERS AM HDMI DVD IN VIDEO 2/BD IN OUT DIGITAL L L R R OPT IN OPT IN COAX IN AUDIO IN AUDIO IN AUDIO IN FRONT R FRONT L SUR R SUR L ANTENNA SAT VIDE
ページ18に含まれる内容の要旨
Notes on HDMI connections The sound is output from the TV speaker only when a playback component and this receiver, as well as this receiver and the TV are connected via the HDMI jack. To output the sound from the supplied speakers and to take advantage of the multi channel surround sound, be sure to – connect the digital audio jacks on the playback component to the receiver. – turn off or mute the TV’s volume. The receiver does not support HDMI CONTROL function. This receiver may
ページ19に含まれる内容の要旨
Getting Started 4: Connecting the antennas Connect the supplied AM loop antenna and FM wire antenna. FM wire antenna (supplied) AM loop antenna (supplied) SPEAKERS AM HDMI DVD IN VIDEO 2/BD IN OUT DIGITAL L L R R OPT IN OPT IN COAX IN AUDIO IN AUDIO IN AUDIO IN FRONT R FRONT L SUR R SUR L SAT VIDEO 2/BD DVD ANTENNA SA-CD/CD TV VIDEO 1 DMPORT Notes To prevent noise pickup, keep the AM loop antenna away from the receiver and other components. Be sure to fully extend the FM wire antenna. A
ページ20に含まれる内容の要旨
Performing initial setup 5: Preparing the receiver operations and the remote Before using the receiver for the first time, initialize the receiver by performing the Connecting the AC power cord following procedure. This procedure can also be used to return settings you have made to Connect the AC power cord to a wall outlet. their factory defaults. Be sure to use the buttons on the receiver for AC power cord this operation. 1,2 MASTER VOLUME DMPORT VIDEO 1 VIDEO 2/BD DVD SAT TV SA-CD/CD
