ページ1に含まれる内容の要旨
DUAL-DECK VCR
DDV2120
USER’S GUIDE
• Flying Erase Heads
• Quasi S-VHS Playback
• Jog/Shuttle Remote
SSC.2120.050301
ページ2に含まれる内容の要旨
Congratulations... ...on your purchase of this Sensory Science Dual-Deck VCR! We know you will enjoy this product for many years to come. In case warranty service is required, please take a moment to attach your receipt to this manual and write down your Serial Number (located on the back panel of the VCR): __________________________________ . About this Manual This manual has been designed to acquaint you with all the features and functionality of the Dual-Deck VCR. The first two chapters cover
ページ3に含まれる内容の要旨
TABLE OF CONTENTS SAFETY ................................................................................ iii 1 - GETTING STARTED 1 Unpacking ...................................................................... 1 Basic Connections .......................................................... 2 Auto Setup ..................................................................... 3 Remote Control Setup.................................................... 4 2 - QUICK TOUR 5 Remote Control ............
ページ4に含まれる内容の要旨
9 - COMMERCIAL ADVANCE 28 Commercial Advance ................................................... 28 Marking Commercials................................................... 29 Commercial Advance Playback .................................... 30 Commercial Free Copy ................................................ 31 10 - SEARCH 32 About Index Marks ....................................................... 32 Index Search/Scan ........................................................ 33 Special Sea
ページ5に含まれる内容の要旨
SAFETY IMPORTANT SAFETY INSTRUCTIONS READ INSTRUCTIONS VENTILATION All the safety and operating instructions Slots and openings in the cabinet are pro- should be read before the unit is operated. vided for ventilation to ensure reliable opera- tion of the video unit and to protect it from overheating. These openings must not be RETAIN INSTRUCTIONS blocked or covered. Never place your VCR The safety and operating instructions should on a bed, sofa, rug or other similar surface, be retained for fu
ページ6に含まれる内容の要旨
Electrical Code, ANSI/NFPA No. 70-1984, spill liquids of any kind onto the unit. Should provides information with respect to proper spillage occur, unplug unit and have it grounding of the mast and supporting struc- checked by a technician before use. ture, grounding of the lead-in wire to an an- tenna discharge unit, size of grounding con- SERVICING ductors, location of antenna-discharge unit, Do not attempt to service this video unit your- connection to grounding electrodes, and re- self as op
ページ7に含まれる内容の要旨
UNP ACKING D W F GETTING STAR TED This Chapter will guide you through initial setup of your Dual-Deck VCR, 1 including basic connections, Auto Setup, and remote programming. Before you begin, please check that all items are included in your Dual-Deck VCR box, then insert the enclosed batteries in the remote control. 1 CHECK PACKING LIST • Dual-Deck VCR DDV2120 • Remote Control Power Deck Select Copy VCR POWER COPY TAPE Ch TV/VCR Menu Rec Video Audio VCR Plus+ TV/VCR • Two (2) “AA” Batteries SLOW
ページ8に含まれる内容の要旨
Follow these steps to connect the Dual-Deck VCR to your television and antenna/cable TV. From Antenna or Cable TV To Television To Line Inputs on your Television 1 CONNECT ANTENNA/CABLE TV 4 TURN ON TV, VCR, CABLE BOX Connect the coaxial cable from your Press POWER on your television, VCR indoor/outdoor antenna or cable TV and/or Cable Box. outlet/cable box to the “IN (FROM ANT.)” jack on the VCR back panel. 5 SET TELEVISION CHANNEL Channel 3 2 CONNECT VCR TO TV If you chose the Standard RF Opti
ページ9に含まれる内容の要旨
AUTO SETUP Follow these steps to run Auto Setup, which will set the clock and save local channels automatically. POWER 1 SET MENU LANGUAGE press The first time you turn on your Dual-Deck VCR, you will be prompted to set the menu language. Press 1 for English or 2 for French. LANGUAGE/LANGUE 2 CONFIRM ANTENNA/CABLE 1 English CONNECTION 2 Français If you have not already done so, make sure you have connected an antenna or basic Select = 1-2 cable to the “IN (FROM ANT.)” jack on the Choisir = 1-2
ページ10に含まれる内容の要旨
E D W P F A T Follow these steps to program the remote control to operate many brands of television. 1 TURN ON TELEVISION POWER Press POWER on your television. 2 ENTER CODE VCR Plus+ TV/VCR SLOW Press and hold the TV key on the VCR remote 1 2 3 control while entering the 2-digit code for your TRK–AUTO–TRK brand of television with the 0-9 keys (see table 4 5 6 below). If there is more than one code for your REPEAT SKIP brand of television, try them all until one works. 7 8 9 SEARCH/INDEX 100+ 0 S
ページ11に含まれる内容の要旨
REMOTE CONTROL E D W P F A T QUICK TOUR This Chapter provides an overview of the Remote Control, Front Panel, 2 Front Panel Display and On-Screen Display. The following is an overview of the Dual-Deck VCR remote control. The keys are listed in alphabetical order. 0-9 While watching TV, press to select channels. While in the menu system, press to select menu POWER items. VCR Plus+ TV/VCR 100+ SLOW Press to select cable channels 100 and above. 1 2 3 TRK–AUTO–TRK AUDIO DUB 4 5 6 While a recording i
ページ12に含まれる内容の要旨
JOG WHEEL SLOW –/+ While a tape is paused, rotate the Jog Wheel While a tape is playing, press to play the tape forward or backward to advance or rewind the in slow motion at variable speeds. tape one frame at a time. SP/SLP LCV Press to set the record speed to SP (Standard While watching TV, press to display the last Play) or SLP (Super Long Play). SLP is three channel viewed. times longer than SP. MENU STILL/F.ADV Press to display the VCR’s Main Menu. While a tape is playing or recording, pres
ページ13に含まれる内容の要旨
FRONT P ANEL The following is an overview of the Dual- Deck VCR front panel. DDV2120 Power Deck Select Copy VCR Rec Ch TV/VCR Menu Video Audio 123 45678 10 12 9 11 1 POWER 9 STOP/EJECT Press to power the VCR on and off. Press once to stop the tape in the active deck, or press twice to eject 2 DECK SELECT the tape. In the menu system, press Press to switch control between to move the blinking selection Deck 1 and Deck 2. arrow down. 3 COPY TAPE 10 PLAY Press to copy the tape in Deck 1 to Press
ページ14に含まれる内容の要旨
The following is an overview of the front panel display. 12 3 4 67 8 5 DECK 1 VCR TIMER COPY SAP Hi-Fi STEREO DECK 2 AM S L P S L P 910 11 12 1 DECK 1 STATUS INDICATOR 8 DECK 2 STATUS INDICATOR Lights to show you that Deck 1 is Lights to show you that Deck 2 is active. Also, graphically displays the active. Also, graphically displays the status of the tape in Deck 1; e.g., status of the tape in Deck 2; e.g., Stop, Play, Rewind, etc. Stop, Play, Rewind, etc. 2 TV/VCR INDICATOR 9 DECK 1 PL
ページ15に含まれる内容の要旨
ON-SCREEN DISPLA Y The following is an overview of the On-Screen Display (OSD). 6 Deck 1 TV VIEW Deck 2 5 Play Deck 1 Stop 7 4 0 : 00 : 00 0 : 00 : 00 8 SP SLP 9 3 10 Sequential Play 2 Ch 10 Source Ch 10 1 Fri Jan 12, 2001 12 : 34 PM 1 DATE AND TIME 6 TV VIEW When the TV View is set to Channel, Shows you the input source you are Line 1, or Line 2, the date and time are currently watching (Channel, Deck 1, displayed at the bottom of the screen. Deck 2, Line 1, or Line 2). 2 RECORD SOURCE 7
ページ16に含まれる内容の要旨
E D W P F A T COPY This Chapter will show you how to copy tapes with your Dual-Deck VCR. 3 To set up the Commercial Free Copy feature, please see Chapter 9. Follow these steps to copy a tape from Deck 1 to Deck 2. 1 INSERT SOURCE TAPE POWER Insert the tape you want to copy in Deck 1. 2 INSERT TARGET TAPE VCR Plus+ TV/VCR SLOW Insert the tape you want to copy to in Deck 2. 1 2 3 • Make sure the tape has a TRK–AUTO–TRK record safety tab or it will eject 4 5 6 when you press COPY TAPE. REPEAT SKIP
ページ17に含まれる内容の要旨
COPY SETTINGS Follow these steps to set the default Copy Settings for your Dual-Deck VCR. MENU 1 OPEN MAIN MENU press Press MENU. 2 SELECT “COPY SETTINGS” MAIN MENU Press 1. 1 Copy Settings 2 Playback Settings 3 ADJUST COPY SETTINGS 3 Record/Edit Settings 4 Channel Settings Press 1, 2, 3, 4, or 5 to set each of the following: 5 VCR Settings 6 Timer Recording 1 - Comm. Free Copy 7 Language/Langue Please refer to page 31. / = Move = Sel MENU = Quit 2 - EZ Copy On – Turns EZ Copy on. When
ページ18に含まれる内容の要旨
E D W P F A T PLA Y This Chapter will show you how to play videotapes and 4 set special playback preferences. Follow these steps to play a standard VHS or Super VHS videotape. 1 INSERT TAPE POWER Insert a standard VHS tape or S-VHS tape into Deck 1 or Deck 2. VCR Plus+ TV/VCR 2 PLAY TAPE SLOW 1 2 3 Press PLAY . TRK–AUTO–TRK 4 5 6 3 OPTIONS DURING PLAYBACK REPEAT SKIP 7 8 9 Freeze - To freeze a single frame, press SEARCH/INDEX STILL/F.ADV. 100+ 0 Frame Advance - To advance one frame at SELECT •TV
ページ19に含まれる内容の要旨
PLA YBACK SETTINGS Follow these steps to set the default Playback Settings for your Dual-Deck VCR. MENU 1 OPEN MAIN MENU press Press MENU. 2 SELECT “PLAYBACK SETTINGS” MAIN MENU Press 2. 1 Copy Settings 2 Playback Settings 3 Record/Edit Settings 3 ADJUST PLAYBACK SETTINGS 4 Channel Settings Press 1, 2, 3, 4 or 5 to set each of the following: 5 VCR Settings 6 Timer Recording 1 - Deck 1 Hi-Fi 7 Language/Langue On – The VCR will play the Hi-Fi audio track / = Move = Sel MENU = Quit on tape
ページ20に含まれる内容の要旨
E D W P F A T RECORD This Chapter will show you how to record television programs 5 and set recording preferences. Follow these steps to record a television show currently in progress. 1 INSERT TAPE POWER Insert a VHS tape with a record safety tab into Deck 1 or Deck 2. Record Safety Tab VCR Plus+ TV/VCR 2 SET RECORD SPEED SLOW 1 2 3 Press the SP/SLP key to set the record speed to: TRK–AUTO–TRK • SP – Standard Play, for best quality. 4 5 6 REPEAT SKIP • SLP – Super Long Play, for maximum recordi
