ページ1に含まれる内容の要旨
Data Capture
for Workforce
in Motion
BaracodaManager software v3.36.2
for Smartphone platform (WM5 / WM6)
TM
©Baracoda – May 2009
ページ2に含まれる内容の要旨
Data Capture for Workforce in Motion REVISION HISTORY Changes to the original manual are listed below. Document Date Description 1.0 23rd April 08 Initial release for BaracodaManager v3.32 3.34 17th June 08 Upgrade for BaracodaManager v3.34 (BRR Evolution supported) 3.35 2nd January 09 Upgrade for BaracodaManager v3.35 (TagRunners supported) 3.36 30th March 09 Upgrade for BaracodaManager v3.36 (DualRunners supported) 3.36.2 25th May 09 OS detection, BaracodaManager version
ページ3に含まれる内容の要旨
Data Capture for Workforce in Motion INTRODUCTION This document explains how to install step by step our BaracodaManager software on the Smartphone platforms using Windows Mobile 5 or Windows Mobile 6. Please note that the BaracodaManager for Smartphone can only be run on Windows Mobile 5 Smartphone or Windows Mobile 6 Standard devices. If you have a Windows Mobile Classic or Professional device, the following window will be shown at startup: As suggested
ページ4に含まれる内容の要旨
Data Capture for Workforce in Motion 1. Save the BM.CAB file to the computer’s Desktop folder. 2. Create an ActiveSync between the computer and the mobile device. 3. Use the ActiveSync tool to explore the mobile device. 4. Copy and Paste the BM.CAB file to the mobile device. 5. From this step onwards, ActiveSync is not required. 6. On the mobile device, activate the BM.CAB file and allow it to self extract. 7. Once the file is installed make sure Bluetooth is active on the mobile devi
ページ5に含まれる内容の要旨
Data Capture for Workforce in Motion 10. The Main Window in the BaracodaManager will show a device list and two labels. See Picture 2. Picture 2 a. The device list shows the local Bluetooth devices and it will be empty the first time the BaracodaManager is launched. b. The first label is the “Configured Device” label. c. This label shows the configured devices and it will show “No Configured Reader” the first time the BaracodaManager is launched. d. The second label is the “
ページ6に含まれる内容の要旨
Data Capture for Workforce in Motion 12. The two connection options on the main menu are disabled with a Baracoda reader is not configured. 13. When a Bluetooth Inquiry is launched, a progress bar is shown at the top of the window and the device list is disabled. See Picture 4. Picture 4 14. Once the Bluetooth inquiry has completed, the device list is populated with the devices and MAC addresses of the Bluetooth devices that were discovered during the Bluetooth inquiry. See Pic
ページ7に含まれる内容の要旨
Data Capture for Workforce in Motion 15. The user selects the Baracoda reader to connect to the handset and uses the connect option from the main menu accomplish this Bluetooth connection. See Picture 6. Picture 6 16. If this is the first Bluetooth connection between the mobile device and the Baracoda reader the user will need to enter the Bluetooth PIN code to authenticate the connection. The default PIN code for Baracoda readers is “0000”. 17. Once this operation is complete t
ページ8に含まれる内容の要旨
Data Capture for Workforce in Motion 18. The user can use the auto-connect option on the main menu to active the auto-connect feature of the BaracodaManager that allows the BaracodaManager to automatically connect to the chosen device whenever the BaracodaManager is active and the device is turned on. PLEASE NOTE: when the auto-connect feature is enabled the BaracodaManager cannot launch a Bluetooth inquiry. See Picture 8. Picture 8
ページ9に含まれる内容の要旨
Data Capture for Workforce in Motion 19. The Kemul option in the main menu allows the user to set a prefix and suffix for every scanned barcode. a. The Picture 9 shows a prefix of “abc” and a suffix of “123” set up in the Kemul option of the main menu. Picture 9 b. The Picture 10 shows how the data would look if the barcode that was scanned was “abcdefghij”. Picture 10 c. The text box of the second picture reads “abcabcdefghij123”. This is the correct format illustrat
