Summary of the content on the page No. 1
Getting Started
Please refer to the complete user guide included
on the CD-ROM for more detailed information.
• Before use, be sure to read this guide, including the
safety precautions.
• This guide will familiarize you with how to use the camera
correctly.
• Keep the guide handy for future reference.
ENGLISH ENGLISH
C OP Y
Summary of the content on the page No. 2
Package Contents Before use, make sure the following items are included in the package. If anything is missing, contact your camera dealer. ELPH 530 HS IXUS 510 HS ELPH 530 HS IXUS 510 HS Camera Battery Pack NB-9L Battery Charger (with terminal cover) CB-2LB/CB-2LBE ELPH 320 HS IXUS 240 HS ELPH 320 HS IXUS 240 HS Battery Pack NB-11L Battery Charger CB-2LD/2LDE (with terminal cover) Wrist Strap Interface Cable WS-DC10 IFC-400PCU Getting Started DIGITAL CAMERA Warranty Solution Disk Card • A
Summary of the content on the page No. 3
Compatible Memory Cards The following memory cards (sold separately) can be used, regardless of capacity. ELPH 530 HS IXUS 510 HS • microSD memory cards* • microSDHC memory cards* • microSDXC memory cards* ELPH 320 HS IXUS 240 HS • SD memory cards* • SDHC memory cards* • SDXC memory cards* • Eye-Fi cards * Conforms to SD specifications. However, not all memory cards have been verified to work with the camera. ELPH 320 HS IXUS 240 HS About Eye-Fi Cards This product is not guaranteed to support
Summary of the content on the page No. 4
Preliminary Notes and Legal Information • Take and review some test shots initially to make sure the images were recorded correctly. Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including memory cards, that results in the failure of an image to be recorded or to be recorded in a way that is machine readable. • Images recorded by the camera are intended f
Summary of the content on the page No. 5
EC324_318_GS-EN_01.fm Page 5 Wednesday, March 28, 2012 2:56 PM Safety Precautions • Before using the product, please ensure that you read the safety precautions described below. Always ensure that the product is used correctly. • The safety precautions noted on the following pages are intended to prevent injuries to yourself and other persons, or damage to the equipment. • Be sure to also check the guides included with any separately sold accessories you use. Denotes the possibility of ser
Summary of the content on the page No. 6
EC324_318_GS-EN_01.fm Page 6 Wednesday, March 28, 2012 2:56 PM Safety Precautions • Turn the camera off in places where camera use is prohibited. The electromagnetic waves emitted by the camera may interfere with the operation of electronic instruments and other devices. Exercise adequate caution when using the camera in places where use of electronic devices is restricted, such as inside airplanes and medical facilities. • Do not play the supplied CD-ROM(s) in any CD player that does not
Summary of the content on the page No. 7
EC324_318_GS-EN_01.fm Page 7 Wednesday, March 28, 2012 2:56 PM Safety Precautions • Remove and store the battery when you are not using the camera. If the battery is left inside the camera, damage caused by leakage may occur. • Before you discard the battery, cover the terminals with tape or other insulators. Contacting other metal materials may lead to fire or explosions. • Unplug the battery charger from the power outlet after charging is complete, or when you are not using it. • Do not pl
Summary of the content on the page No. 8
Part Names and Conventions in This Guide ELPH 530 HS IXUS 510 HS Lens Microphone Wireless LAN indicator Speaker Zoom lever Battery cover Shooting: i (telephoto) / j (wide DC coupler terminal cover angle) Tripod socket Playback: k (magnify) / g (index) Screen (LCD monitor) Shutter button Memory card cover Indicator Strap mount 1 (Playback) button TM HDMI terminal Power button AV OUT (Audio/video output) / DIGITAL Lamp terminal Flash • In this guide, icons are used to represent the correspondin
Summary of the content on the page No. 9
Part Names and Conventions in This Guide ELPH 320 HS IXUS 240 HS Lens Tripod socket Speaker Screen (LCD monitor) Zoom lever Memory card/battery cover Shooting: i (telephoto) / j (wide 1 (Playback) button angle) Indicator Playback: k (magnify) / g (index) DC coupler cable port Shutter button Strap mount Power button TM HDMI terminal Mode switch AV OUT (Audio/video output) / DIGITAL Flash terminal Lamp Wireless LAN indicator Microphone • The tabs shown above titles indicate whether the function i
Summary of the content on the page No. 10
Touch-Screen Operations The camera’s touch-screen panel enables intuitive operation simply by touching or tapping the screen. Touch Touch the screen briefly with your finger. This gesture is used to shoot, configure camera functions, and so on. Drag Touch the screen and move your finger across it. This gesture is used in Playback mode to switch to the next image, or to change the magnified image area, among other operations. • Gestures may not be detected as easily if you apply a screen
Summary of the content on the page No. 11
Initial Preparations Prepare for shooting as follows. Attaching the Strap Attach the strap. Thread the end of the strap through the strap hole ( ), and then pull the other end of the strap through the loop on the threaded end (). Holding the Camera ELPH 530 HS IXUS 510 HS Place the strap around your wrist. When shooting, hold the camera securely to prevent it from moving. Do not rest your fingers on the flash. ELPH 320 HS IXUS 240 HS Place the strap around your wrist. When shooting, ke
Summary of the content on the page No. 12
Initial Preparations Charging the Battery Before use, charge the battery with the included charger. Be sure to charge the battery initially, because the camera is not sold with the battery charged. ELPH 530 HS IXUS 510 HS Remove the cover. Insert the battery. After aligning the marks on the battery and charger, insert the battery by pushing it in ( ) and down ( ). ELPH 320 HS IXUS 240 HS ELPH 530 HS IXUS 510 HS Charge the battery. For CB-2LB/CB-2LD: Flip out the plug ( ) and plug the char
Summary of the content on the page No. 13
Initial Preparations ELPH 320 HS IXUS 240 HS CB-2LD CB-2LDE ELPH 530 HS IXUS 510 HS Remove the battery. After unplugging the battery charger, remove the battery by pushing it in ( ) and up ( ). ELPH 320 HS IXUS 240 HS • To protect the battery and keep it in optimal condition, do not charge it continuously for more than 24 hours. • For battery chargers that use a power cord, do not attach the charger or cord to other objects. Doing so could result in malfunction or damage to the product. • F
Summary of the content on the page No. 14
Initial Preparations Inserting the Battery and Memory Card Insert the included battery and a memory card (sold separately). Note that before using a new memory card (or a memory card formatted in another device), you should format the memory card with this camera (see Camera User Guide). ELPH 530 HS IXUS 510 HS Open the battery cover. Slide the cover ( ) and open it ( ). Insert the battery. While pressing the battery lock in the direction of the arrow, insert the battery facing as shown an
Summary of the content on the page No. 15
Initial Preparations Insert the memory card. Insert the memory card facing as shown until it clicks into the locked position. Make sure the memory card is facing the right way when you insert it. Inserting memory cards facing the wrong way may damage the camera. Label Close the memory card cover. Lower the cover ( ) and hold it down as you slide it until it clicks into the closed position (). Removing the Battery Open the cover and press the battery lock in the direction of the arrow.
Summary of the content on the page No. 16
Initial Preparations ELPH 320 HS IXUS 240 HS Check the card’s write-protect tab. Recording is not possible on memory cards with a write-protect tab when the tab is in the locked (downward) position. Slide the tab up until it clicks into the unlocked position. Open the memory card/battery cover. Slide the cover ( ) and open it ( ). Insert the battery. While pressing the battery lock in the direction of the arrow, insert the battery facing as shown and push it in until it clicks into the
Summary of the content on the page No. 17
Initial Preparations Removing the Battery and Memory Card Remove the battery. Open the cover and press the battery lock in the direction of the arrow. The battery will pop up. Remove the memory card. Push the memory card in until it clicks, and then slowly release it. The memory card will pop up. Setting the Date and Time A screen for setting the date and time is displayed the first time you turn the camera on. Be sure to specify the date and time, which is the basis for dates and times
Summary of the content on the page No. 18
Initial Preparations • Unless you set the date and time, the [Date/Time] screen will be displayed each time you turn the camera on. Specify the correct information. • To set daylight saving time (1 hour ahead), touch and choose in step 2. Changing the Date and Time Adjust the date and time as follows. Access the camera menu. Touch H, and then touch n. Choose [Date/Time]. Touch the 3 tab. Drag up or down across the screen to choose [Date/Time]. Touch [Date/Time]. Change the date and time
Summary of the content on the page No. 19
Initial Preparations Display Language The display language can be changed as needed. ELPH 530 HS IXUS 510 HS Enter Playback mode. Press the 1 button. ELPH 320 HS IXUS 240 HS Access the setting screen. Touch and hold n until the setting screen is displayed. Set the display language. Touch a display language to choose it, and then touch ^. Once the display language has been set, the setting screen is no longer displayed. • If there are images on the memory card, touch H in the lower left t
Summary of the content on the page No. 20
Still Images Movies Trying the Camera Out Follow these instructions to turn the camera on, shoot still images or movies, and then view them. Shooting (Smart Auto) For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions. Turn the camera on. Press the power button. The startup screen is displayed. ELPH 530 HS IXUS 510 HS Enter Auto mode. ELPH 530 HS IXUS 510 HS Touch , touch qr or quickly drag left or right
