Summary of the content on the page No. 1
DXG-503
User’s Manual
Preface
Congratulations on your purchase of the DXG-503 digital
camera. Please read this manual carefully and keep it in a
safe place for future reference.
About this manual
Every effort has been made to ensure that the contents of
this manual are correct and up to date. However, no
guarantee is made regarding the accuracy of the contents, and
DXG reserves the right to make changes without notice.
Copyright
© Copyright
Summary of the content on the page No. 2
Safety ‧ Inserting the batteries upside down can cause damage to the camera. ‧ Never attempt to recharge non-rechargeable batteries. ‧Do not use or store the product in dusty, dirty, or sandy areas, as the components may be damaged. ‧Do not store the product in hot areas. High temperatures can shorten the life of electronic devices, damage batteries and warp certain plastics. ‧Do not store the product in cold areas. When the product warms up to its normal temperature, moisture can f
Summary of the content on the page No. 3
Table of Contents Preface About this manual ....................................................…....i Copyright ..................................................................…...i Safety ....................................................................……..ii Overview Camera Features ..................................................….......1 Unpacking ...........................................................…........2 About the camera ................................
Summary of the content on the page No. 4
About the LEDs .......................................................….......17 Photo mode ............................................................….........19 Using photo mode..........................................…..............19 Flash........................................................................….....21 Macro...................................................................…........22 Zoom................................................................….......
Summary of the content on the page No. 5
Using playback mode ....................................................40 Menu options..................................................................40 Installing the software and drivers Drivers ...........................................................................45 Presto! Video Works 6 ...................................................46 Presto! Mr. Photo 3 ........................................................47 Appendix A Specifications ..........................
Summary of the content on the page No. 6
System requirements 1. Overview 1.1 Camera features The DXG-503 has many features including: ‧ Digital still camera (5.1 megapixels) ‧ Digital camcorder ‧ Mass storage device ‧ Voice recorder ‧ 3X optical zoom ‧ Direct Print functionality 1 6
Summary of the content on the page No. 7
1.2 Unpacking All the following items should be included in the camera package. If any item is missing or appears damaged, contact DXG USA immediately. Camera Wrist strap Camera pouch AA batteries USB / TV-out cable 2 7 Unpacking
Summary of the content on the page No. 8
About the camera CD-ROM (driver and User manual application software) 1.3 About the camera Refer to the following diagrams to familiarize yourself with the buttons and controls of the camera. 1.3.1 Front view 3 8
Summary of the content on the page No. 9
1.3.2 Back View 1.4.3 Top view 4 9 About the camera
Summary of the content on the page No. 10
Installing the battery 2. Getting started This section covers only basic functions. See later chapters for details about advanced functions. 2.1 Installing the battery The camera requires two AA sized batteries. Insert the batteries as shown here. 1. Open the battery door. 2. Insert the batteries as shown. 5 10
Summary of the content on the page No. 11
3. Close the battery door. Note: Be sure the batteries are installed properly. Batteries inserted upside down can damage the product 2.2 Inserting an SD card An optional SD/MMC card can be installed in the camera to provide additional storage space for still images, video, or other files. These cards are available for purchase at www.dxgusa.com To install an SD card: 1. Open the battery door. 2. Insert an SD card as shown. Make sure the gold con
Summary of the content on the page No. 12
Turning on for the first time 3. Close the battery door. 2.3 Powering on the camera Press and hold the power button for two seconds. 2.4 Before you start Before you use your camera there are some basic settings you should adjust.. 2.4.1 Setting the date and time To set the date and time: 1. Use the mode dial to switch the camera to the Setup Mode. 7 12
Summary of the content on the page No. 13
2. Use the joystick to scroll through the options until DATE/TIME AD is highlighted. 3. Press the center joystick button to display the DATE/TIME submenu. 4. Use the joystick (left and right) to move through the year, month, date, hours, minutes, and format field. 5. Use the joystick (up and down) to change the selected field. 6. Press the center joystick button to complete the change. 2.4.2 Setting the beep function To set the beep function: 1. Use the mode
Summary of the content on the page No. 14
Before you start 3. Press the center joystick button to display the BEEP VOL submenu. 4. Use the joystick (up and down) to select the Beep On or Beep Off . 5. Use the joystick (left and right) to adjust the volume slider as required. 6. Press the center joystick button to complete the change. 2.4.3 Setting the language To set the language: 1. Use the mode dial to switch the camera to Setup Mode. 2. Use the joystick to scroll through the options until LA
Summary of the content on the page No. 15
4. Use the joystick (left and right) to scroll through the available language options. 5. Press the center joystick button to complete the change. 2.5 Changing modes The DXG-503 can operate in five modes. Each mode is explained in the following table. Use the mode switch to change the mode. Icon Mode Description Photo For still pictures. The shutter speed and aperture are set by the camera. Scene For still pictures. 15 preset
Summary of the content on the page No. 16
Taking your first still picture 2.6 Taking still pictures Before taking your first still picture, ensure you have read “Before you start” on page 7. To take a still picture: 1. Turn the camera on and make sure it is in Photo Mode. 2. Use the viewfinder or LCD screen to frame the picture. 3. Press the shutter button to capture the picture. The picture will automatically be saved with a unique file name. 2.7 Shooting video Before shooting your first video, ensure you have rea
Summary of the content on the page No. 17
2.8 Connecting to a TV or PC Read this section to learn how to connect the camera to a host computer and to a TV. 2.8.1 Connecting to a TV Connect the camera to a TV as shown. 12 17 Connecting to a TV or PC
Summary of the content on the page No. 18
Connecting to a TV or PC 2.8.2 Connecting to a Computer Connect the camera to a host computer using the USB port as shown. 13 18
Summary of the content on the page No. 19
3. Using the camera Read this section to learn how to configure the camera and use the advanced features. 3.1 Using the camera buttons All buttons are located on the top and the back of the camera. Back Top 14 19 Using the camera buttons
Summary of the content on the page No. 20
Using the camera buttons See the table below for a description of each button’s function. Button Name Function Display To switch between LCD display modes. Zoom Use to zoom in or out in Photo or Video modes. Use to increase or decrease image size in Playback mode. Menu Press to display the main OSD menu. Joystick Use to navigate the OSD menus.
