Summary of the content on the page No. 1 
                    
                        DMC-FT2&TS2P-VQT2M30_eng.book  1 ページ  2010年1月29日 金曜日 午後5時31分
Basic Operating Instructions
Digital Camera
Model No. DMC-TS2
 Before connecting, operating or adjusting this product,
please read the instructions completely.
Please also refer to Operating 
Instructions (PDF format) 
recorded on the CD-ROM 
containing the Operating Instructions 
(supplied).
You can learn about advanced operation methods 
and check the Troubleshooting.
For USA and Puerto Rico assistance, please call: 1-800-211-PANA(72
                    
                    Summary of the content on the page No. 2 
                    
                        DMC-FT2&TS2P-VQT2M30_eng.book  2 ページ  2010年1月29日 金曜日 午後5時31分 Please be sure to read “(Important) About the Waterproof/Dustproof and  Anti-shock Performance of the Camera” (P8) and “Maintenance and  Waterproof Performance” (P10) before using this unit underwater to  prevent the unit from being mishandled, which may cause water to seep in. Dear Customer, Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on  the market today. Used properly, we’
                    
                    Summary of the content on the page No. 3 
                    
                        DMC-FT2&TS2P-VQT2M30_eng.book  3 ページ  2010年1月29日 金曜日 午後5時31分 Information for Your Safety WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT  DAMAGE, � DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING  OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH  AS VASES, SHALL BE PLACED ON THE APPARATUS. � USE ONLY THE RECOMMENDED ACCESSORIES. � DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER  SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED  SERVICE PERSONNEL. THE 
                    
                    Summary of the content on the page No. 4 
                    
                        DMC-FT2&TS2P-VQT2M30_eng.book  4 ページ  2010年1月29日 金曜日 午後5時31分 FCC Note: This equipment has been tested and found to comply with the limits  for a Class B digital device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against  harmful interference in a residential installation. This equipment  generates, uses, and can radiate radio frequency energy and, if not  installed and used in accordance with the instructions, may cause  harmful interference
                    
                    Summary of the content on the page No. 5 
                    
                        DMC-FT2&TS2P-VQT2M30_eng.book  5 ページ  2010年1月29日 金曜日 午後5時31分 ∫ About the battery pack CAUTION Battery pack (Lithium ion battery pack) � Use the specified unit to recharge the battery pack. � Do not use the battery pack with equipment other than the specified unit. � Do not get dirt, sand, liquids, or other foreign matter on the terminals. � Do not touch the plug terminals (i and j) with metal objects. � Do not disassemble, remodel, heat or throw into fire. If any electrolyte should come into con
                    
                    Summary of the content on the page No. 6 
                    
                        DMC-FT2&TS2P-VQT2M30_eng.book  6 ページ  2010年1月29日 金曜日 午後5時31分 Battery charger This battery charger operates on AC between 110 V and 240 V. But � In the U.S.A. and Canada, the battery charger must be connected to a 120 V  AC power supply only. � When connecting to an AC supply outside of the U.S.A. or Canada, use a  plug adaptor to suit the AC outlet configuration. ∫ Cautions for Use � Always use a genuine Panasonic AC adaptor (DMW-AC5PP; optional). � Always use a genuine Panasonic multi conversio
                    
                    Summary of the content on the page No. 7 
                    
                        DMC-FT2&TS2P-VQT2M30_eng.book  7 ページ  2010年1月29日 金曜日 午後5時31分 Contents Information for Your Safety ........................................................................... 3 (Important) About the Waterproof/ Dustproof and Anti-shock Performance of the Camera ................................8 Maintenance and Waterproof Performance ................................................ 10 • Using the camera underwater............................................................... 14 • Causes of water 
                    
                    Summary of the content on the page No. 8 
                    
                        DMC-FT2&TS2P-VQT2M30_eng.book  8 ページ  2010年1月29日 金曜日 午後5時31分 (Important) About the Waterproof/ Dustproof and Anti-shock Performance of  the Camera • Please observe the following precautions, and avoid using this camera in any  situation where the camera is subject to high water pressure. This camera’s  waterproof/dustproof rating complies with the “IPX8” and “IP6X” ratings.  Provided the care and maintenance guidelines described in this document are  strictly followed, this camera can operate un
                    
                    Summary of the content on the page No. 9 
                    
                        VQT2M30~Body1_eng.fm  9 ページ  2010年2月2日 火曜日 午後6時26分 ∫ Handling of the camera • Do not leave the camera for a long period of time in places where temperature is  very low (ski resort etc.) or very high [above 40 oC (104 oF)], inside a car under  strong sunlight, close to a heater, on the beach, etc. Waterproof performance  may be degraded. • The inside of this unit is not waterproof. Do not open or close the card/battery  door or terminal cover close to the water by the sea, a lake or river, or wi
                    
                    Summary of the content on the page No. 10 
                    
                        DMC-FT2&TS2P-VQT2M30_eng.book  10 ページ  2010年1月29日 金曜日 午後5時31分 Maintenance and Waterproof Performance ∫ To prevent water leaking into the camera, observe the following  items before using it. ∫ Check that there is enough remaining battery power or memory in  the card. ∫ Do not open or close the card/battery door or terminal cover in  places with sand and dust, or with wet hands. ∫ At purchase, the [LOCK] switch is in the locked state. When opening  the card/battery door and terminal cover, first 
                    
                    Summary of the content on the page No. 11 
                    
                        DMC-FT2&TS2P-VQT2M30_eng.book  11 ページ  2010年1月29日 金曜日 午後5時31分 Confirm that there are no foreign objects on inner side of  the card/battery door or terminal cover (B rubber seal  and C place where rubber seal meet). A: Terminal cover B: Rubber seal C: Area where rubber seal  sits D: Card/Battery door E: Hair and lint F: Sand and dust G: Crack and deformation H:Fluid • If there is any crack or deformation in the rubber seal inside the card/battery  door and terminal cover, get the camera inspected
                    
                    Summary of the content on the page No. 12 
                    
                        DMC-FT2&TS2P-VQT2M30_eng.book  12 ページ  2010年1月29日 金曜日 午後5時31分 Example of foreign object on the inner side of the card/battery door J: Area where rubber seal  sits (around the card/ battery compartment) K: Rubber seal site (around  the card/battery cover) Example of foreign object on the inner side of the terminal cover L: Area where rubber seal  sits (around the  connection terminal) M: Rubber seal site (around  the terminal cover) • Wipe it off with a dry soft cloth if there is any liquid. • Th
                    
                    Summary of the content on the page No. 13 
                    
                        DMC-FT2&TS2P-VQT2M30_eng.book  13 ページ  2010年1月29日 金曜日 午後5時31分 1:With the [LOCK] switch released, close the card/ battery door and terminal cover by pushing until you  hear a click. • To prevent water seeping into the camera, be careful not to trap foreign  objects such as liquids, sand, hair or dust etc. • Closing the door with the [LOCK] switch in the locked state may result in  damage or leaks. 2:Slide the [LOCK] switch in the direction of the arrow  until the visible red area is no longer vis
                    
                    Summary of the content on the page No. 14 
                    
                        DMC-FT2&TS2P-VQT2M30_eng.book  14 ページ  2010年1月29日 金曜日 午後5時31分 Using the camera underwater • Use the camera underwater up to 10 m (33 feet) depth, water temperature from  0 oC to 40 oC (32 oF to 104 oF), and not longer than 60 minutes continuously. • If there is water or dirt on the camera, use it after wiping it off with a dry soft cloth  and have it dry out in a well ventilated area. • Do not open or close the card/battery door or terminal cover. • Do not apply shock to the camera underwater. (
                    
                    Summary of the content on the page No. 15 
                    
                        DMC-FT2&TS2P-VQT2M30_eng.book  15 ページ  2010年1月29日 金曜日 午後5時31分 Causes of water leak • When the camera is used in the following conditions, a gap may occur between  the camera and the card/battery door or terminal cover, causing water to leak  and malfunction. – When there are foreign objects, such as lint, hair, sand, etc., between the card/ battery door or terminal cover and the camera. – When the rubber seal has deteriorated. – When the [LOCK] switch is not closed on the card/battery door and t
                    
                    Summary of the content on the page No. 16 
                    
                        DMC-FT2&TS2P-VQT2M30_eng.book  16 ページ  2010年1月29日 金曜日 午後5時31分 Caring of the camera after using it underwater 1 With the card/battery door and  terminal cover closed, rinse with  water, or if it was used in the sea,  soak the unit in fresh water in a  shallow container for 10 minutes or  less. • If you have attached the silicon jacket,  be sure to rinse the camera after  removing it. • Leaving the camera with foreign objects or saline matter on it may cause  damage, discoloration, corrosion, unus
                    
                    Summary of the content on the page No. 17 
                    
                        DMC-FT2&TS2P-VQT2M30_eng.book  17 ページ  2010年1月29日 金曜日 午後5時31分 ∫ This unit incorporates a drain design This unit incorporates a drain design, draining  water from gaps in the camera [OFF/ON]  button and zoom lever etc. As a result of this,  bubbles may come out when you soak the  unit in water, but it is not a malfunction. • Example of water droplets around card/battery slot. A: Water droplet B:Battery C:Card • Water droplets may attach to the card or the battery when the card/battery door  is op
                    
                    Summary of the content on the page No. 18 
                    
                        DMC-FT2&TS2P-VQT2M30_eng.book  18 ページ  2010年1月29日 金曜日 午後5時31分 Standard Accessories Check that all the accessories are included before using the camera. Product numbers correct as of January 2010. These may be subject to change. 1 Battery Pack 12 (Indicated as battery pack or  battery in the text) Charge the battery before use. 2 Battery Charger DMW-BCF10PP DE-A59B (Indicated as battery charger or  charger in the text) 34 3 USB Connection Cable 4 AV Cable 5 CD-ROM • Software: Use it to install th
                    
                    Summary of the content on the page No. 19 
                    
                        DMC-FT2&TS2P-VQT2M30_eng.book  19 ページ  2010年1月29日 金曜日 午後5時31分 Names of the Components 1Flash 1 2 3 2 Self-timer indicator/ AF Assist Lamp/LED light 3 Lens 4 LCD monitor 45 11 5 Motion picture button 6 [MENU/SET] button 10 7 [DISPLAY] button 9 8 [Q.MENU]/Delete button 9 Playback button 10 Mode dial 6 78 11 Cursor buttons A: 3/Exposure Compensation/Auto  Bracket/White Balance fine  adjustment B: 4/Macro Mode/ AF Tracking C: 2/Self-timer button D: 1/Flash setting button In these Operating Instructi
                    
                    Summary of the content on the page No. 20 
                    
                        DMC-FT2&TS2P-VQT2M30_eng.book  20 ページ  2010年1月29日 金曜日 午後5時31分 12 Speaker 1213 14 13 Microphone 14 Zoom lever e.g.: To make subjects appear closer  use (Tele) 15 16 Place your finger on the zoom lever,  and press [T] 15 Camera [OFF/ON] button 16 Shutter button 17 Hand strap eyelet • Be sure to attach the hand strap when  17 18 using the camera to ensure that you will  19 not drop it. 18 [HDMI] socket 19 [AV/DIGITAL/MULTI] socket • When using an AC adaptor, ensure that  the Panasonic multi convers