Summary of the content on the page No. 1
User’s Guide
L1900J
L1900R
L1900E
Make sure to read the Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for future reference.
See the label attached on the product and quote this information to your
dealer when you require service.
Summary of the content on the page No. 2
Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential eletrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national stand
Summary of the content on the page No. 3
Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures wh
Summary of the content on the page No. 4
Connect with a computer. Using the Computer 1. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. Connecting with DVI-Analog signal input cable Connecting with DVI-Digital signal input cable 2. Use after connecting power cable to AC-DC power adapter and inserting it into outlet(Voltage is automatically controlled.) Tip Product color represented here may differ from actual product color that customer purchased. L1900E L1900J L1900R When conn
Summary of the content on the page No. 5
Connecting the Display 3. Touch button on the front switch panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. (Only Analog Mode) NOTE ‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. Press Forte Manager Program --> Picture --
Summary of the content on the page No. 6
Install Forte Manager program. This product provides a program(Forte Manager CD) which makes users convenient to adjust various screen conditions including Brightness, Tracking or Resolution by using mouse, without adjusting each button. Tip This software requires Microsoft Internet Explorer 6.0 or greater. Forte Manager Program Installation Procedure 1) Close all other applications before installing Forte Manager program. 2) Installation screen appears automatically when Forte Manager CD-ROM
Summary of the content on the page No. 7
Install Forte Manager program. Forte Manager Program Function To change or adjust Tracking, Brightness, Contrast, Position, Resolution, Sharpness or Preset of Display, use or select Forte Manager program. *Tracking and Position are supported only when signal is in analog mode. PICTURE - Tracking, Brightness, Contrast, Position, Resolution, Sharpness, Wizard, Preset f-Engine - MOVIE, TEXT, NORMAL, USER, Preset Color - Color Temp. RGB, Color Calibration, Preset Options - Preferences, Power Indi
Summary of the content on the page No. 8
Control Panel Functions L1900E Front Panel Controls Rear Control Function Product may be turned on when you touch the button, Power Button and turned off when you touch it once again. * Check Power Indicator after touching Power Button. Power indicator is blue or red when the product is on, Power Indicator and it automatically blinks in Sleep mode(Energy Saving.) NOTE To turn on/off the power indicator manually ~ ~ Select Options of Forte Manager Program -> Power Indicator -> On/Off to manua
Summary of the content on the page No. 9
Control Panel Functions L1900J L1900R Front Panel Controls Control Function Product may be turned on when you touch the button, Power Button and turned off when you touch it once again. Power Indicator is blue or red when the product is on Power Indicator and it automatically repeats from dark to bright mode in Sleep mode (Energy Saving). [L1900J] The button underneath the picture is for adjusting brightness of Power Indicator. * Four-grade brightness adjustment is possible by lightly touching
Summary of the content on the page No. 10
DDC/CI ON/OFF Function DDC/CI(Display Data Channel Command Interface) is communication protocol for communications between PC and monitor. DDC/CI makes it possible to adjust and setup detailed functions on PC instead of the monitor OSD. Monitor can be adjusted with PC by connecting communication between PC and monitor when DDC/CI is ON, and monitor cannot be adjusted with PC because communication between PC and monitor is disconnected when DDC/CI is OFF. Tip Especially, Forte Manager program
Summary of the content on the page No. 11
Troubleshooting Check the following before calling for service. No image appears No image appears Is the power cord of the Check and see if the power cord is connected display connected? properly to the power outlet. Does power indicator If the display is in power saving mode, try moving blink or from dark to the mouse or pressing any key on the keyboard bright mode is to bring up the screen. repeated? Try to turn on the PC. This message appears when the signal from the Do you see an "OUT PC (vi
Summary of the content on the page No. 12
Troubleshooting Display image is incorrect Display Position is Press Forte Manager Program --> Picture incorrect. --> Tracking-->Auto Setup to adjust screen automatically to the optimal condition, which fits to the current mode. Configure by directly adjusting Forte Manager Program --> Picture--> Position if adjusted condition is dissatisfactory Press Forte Manager Program --> Picture On the screen --> Tracking-->Auto Setup to adjust screen background, vertical bars automatically to the op
Summary of the content on the page No. 13
Troubleshooting Have you installed the display driver? Have you installed the Be sure to install the display driver from the display driver? display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lge.com. Do you see an Make sure to check if the video card supports "Unrecognized monitor, Plug&Play function. Plug&Play (VESA DDC) monitor found" message? A12
Summary of the content on the page No. 14
Specifications Display 19 inches (48.19cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 19 inches viewable 0.294mm pixel pitch Sync Input Horizontal Freq. 30 - 83kHz (Analog) 30 - 71kHz (Digital) Vertical Freq. 56 - 75Hz (Automatic) Input Form Separate TTL, Positive/Negative SOG (Sync On Green) Digital Video Input Signal Input DVI - Analog connector DVI - Digital connector Input Form RGB Analog (0.7Vp-p/75ohm), Digital M
Summary of the content on the page No. 15
Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 VGA 31.469 640 x 350 70 2 VGA 31.468 720 x 400 70 3 VGA 31.469 640 x 480 60 4 VESA 37.500 640 x 480 75 5 VESA 37.879 800 x 600 60 6 VESA 46.875 800 x 600 75 7 MAC 49.725 832 x 624 75 8 VESA 48.363 1024 x 768 60 9 VESA 60.023 1024 x 768 75 10 MAC 68.681 1152 x 870 75 11 VESA 61.805 1152 x 900 65 *12 VESA 63.981 1280 x 1024 60 **13 VESA 79.976 1280 x 1024 75 * Recommend Mode ** Only Ana
Summary of the content on the page No. 16
Specifications Kensington Security Kensington Security Slot Connected to a locking cable that can be purchased separately at most computer stores Product color represented here may differ from actual product color that Tip customer purchased. A15
Summary of the content on the page No. 17
Digitally yours
