Summary of the content on the page No. 1 
                    
                        BP48-1 AND SSP48-1 IN-GROUND POST 
INSTALLATION INSTRUCTIONS
WARNING:  THIS IN-GROUND POST IS NOT DESIGNED FOR USE WITH AN LP GAS CYLINDER.
WARNING:  SEE YOUR GRILL OWNER’S MANUAL FOR PROPER LOCATION, MINIMUM CLEARANCES, AND 
OTHER IMPORTANT SAFETY INFORMATION BEFORE PROCEEDING WITH INSTALLATION OF THIS IN-GROUND 
POST.
VERIFY THAT ALL PARTS LISTED ON THE EXPLODED VIEW OF THIS MANUAL HAVE BEEN INCLUDED IN THIS 
POST BEFORE BEGINNING INSTALLATION.
CAUTION: USE CAUTION WHEN HANDLING PARTS, AS THEY
                    
                    Summary of the content on the page No. 2 
                    
                        THIS GAS ACCESSORY IS DESIGNED FOR OUTDOOR USE ONLY IMPORTANT THIS MANUAL SHOULD BE READ THOROUGHLY BY THE PERSON INSTALLING THE GRILL MOUNTING AND ALL  PERSONS WHO WILL USE AND MAINTAIN THE GRILL MOUNTING.  THE INSTALLER SHOULD BE SURE THE MANUAL  IS LEFT IN THE POSSESSION OF THE USER.  THE USER SHOULD RETAIN THIS MANUAL FOR FUTURE REFERENCE  WHEN USING OR CLEANING THE GRILL MOUNTING AND TO PROPERLY IDENTIFY ANY REPAIR PARTS THAT MAY  BE REQUIRED.   WARNING REFERENCE THIS MANUAL FOR PROPER INST
                    
                    Summary of the content on the page No. 3 
                    
                        TABLE OF CONTENTS CONGRATULATIONS!   You have chosen the finest grill for  your outdoor cooking pleasure.  Please take time to read this entire  ® manual before assembling your premium Broilmaster accessory. Important Information .............................................................................................................................4 In-Ground Post Parts List & Exploded View ...................................................................................... .5 In-Ground Po
                    
                    Summary of the content on the page No. 4 
                    
                        IMPORTANT INFORMATION Grill Location Gas Types Broilmaster Premium Gas Grills are  designed for out- Never use liquid propane gas with a grill designed for  door use ONLY. natural gas, or natural gas with a grill designed for liquid  propane gas.  The type of gas required for your grill is  These mounting accessories are designed for use with  defined on its product identification label.  Questions  Broilmaster gas grills and must not be used with any  regarding different types of gases should be 
                    
                    Summary of the content on the page No. 5 
                    
                        IN-GROUND POST PARTS LIST & EXPLODED VIEW All repair part orders should be placed through your local Broilmaster dealer.  To locate a dealer in your area,  contact Broilmaster Customer Service at 800-851-3153.  To ensure prompt and accurate service, please provide  the following information when placing a repair part order:  Model Number, Part Name, Part Number, and Quantity  of parts needed. Key Number Part Name Quantity BP48 Part Number SSP48 Part Number 1 9/32 I.D. x 5/8 O.D. Flat Washer 5 B1
                    
                    Summary of the content on the page No. 6 
                    
                        IN-GROUND POST INSTALLATION The BP48 and SSP48 In-Ground Posts are only for use CAUTION: THE CONCRETE MIXTURE MUST NOT COVER THE GAS  with Broilmaster Gas Grills.  Before proceeding with SUPPLY ENTRY HOLE ON THE POST.  THE GAS SUPPLY ENTRY HOLE  installation read your Owner’s Manual for the proper (2" DIAMETER HOLE) IS LOCATED 18 3/4" FROM THE BOTTOM  location and minimum clearances to combustible ma- OF THE POST. terials for your grill and in-ground post. Make a final alignment check with the le
                    
                    Summary of the content on the page No. 7 
                    
                        IN-GROUND POST INSTALLATION The grill and its individual shutoff valves must be dis- connected from the gas supply piping system during  3 any pressure testing of that system at test pressures  Insert a 1/4 - 20 x 3/4" bolt (5) through one of the four  in excess of 1/2 PSIG. The grill must be isolated from  holes in the top of the post.  Fasten a 1/4 - 20 1 3/4  the gas supply piping system by closing its individual  eyebolt (4), 9/32 ID x 5/8 OD flat washer (1), 1/4 lock  manual shutoff valves d
                    
                    Summary of the content on the page No. 8 
                    
                        IN-GROUND POST INSTALLATION 6 Attach the grease cup bracket assembly (8) to the bottom  of the grill casting and fasten with 10-24 x 3/4" bolt, 9/32  ID x 5/8 OD washer, and #10-24 wing nut. Figure 5.  Use only the supplied grease cup or noncombustible  containers for the grease cup (aluminum or tin cans).  DO NOT use combustible containers such as paper or  Styrofoam cups. FIGURE 5 7 Continue assembly as directed by the Owner’s Manual  packaged with the grill head. ® BROILMASTER Is a registered