Summary of the content on the page No. 1
HDMI 1.3 Matrix Switch Receiver over
CAT5 with IR Pass-Through
Model #: HDMI-C5SW-R
© 20010 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at
Summary of the content on the page No. 2
Table of Contents Section 1: Getting Started ...................................................................................................................... 3 1.1 Important Safeguards ............................................................................................................ 3 1.2 Safety Instructions ................................................................................................................. 3 1.3 Regulatory Notices Federal Communications Commi
Summary of the content on the page No. 3
Section 1: Getting Started 1.1 Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover Any product, on which the serial number has been defaced, modified or removed. Damage, deterioration or malfunction resulting from: Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions suppl
Summary of the content on the page No. 4
1.3 Regulatory Notices Federal Communications Commission (FCC) This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. 1.4 Introduction The Avenview HDMI-C5SW-R, HDMI 1.3 Matrix Switch Receiver over CAT5 with IR Pass-through provides
Summary of the content on the page No. 5
www.avenview.com 5
Summary of the content on the page No. 6
- Silicon Image chipset embedded for best quality, compatibility and reliability - HDMI 1.3c compliant - HDCP compliant - Allows any source to be displayed on multiple displays at the same time - Allows any HDMI display to view any HDMI source at any time - Supports 7.1 channel digital audio - Supports default HDMI EDID and learns the EDID of displays - The matrix master can switch every output channels to any HDMI inputs by push-in button, IR remote control, or RS-232 control - Allows
Summary of the content on the page No. 7
1.7 Panel Description 1.7.1 HDMI-C5SW-R 1. 5V DC Power jack 2. HDMI Signal 3. IR Signal 4. INPUT # 5. Input Select 6. EQ Level 7. HDMI OUT 8. IR Transmitter www.avenview.com 7
Summary of the content on the page No. 8
1.8 Installation (HDMI-C5SW-R) To setup Avenview HDMI-C5SW-R with SW-HDMI-C5-8X8 or SW-HDMI-C5-4X4 follow these steps for connecting to a device: 1. Connect all sources to HDMI Inputs on the 8X8 HDMI over CAT5 Matrix Switch (SW-HDMI-C5-8X8) 2. Connect each DDC output on the SW-HDMI-C5-8X8 to respective DDC input on the remote receiver HDMI-C5SW-R 3. Connect each TMDS output on the SW-HDMI-C5-8X8 to respective TMDS input on the remote receiver HDMI-C5SW-R 4. Connect IR emitter cable t
Summary of the content on the page No. 9
Section 2: Specifications Item Description Units HDMI-C5SW-R Unit Description HDMI 1.3 Receiver over CAT5 HDMI Compliance HDMI 1.3c HDCP Compliance Yes Video Bandwidth Single Link 225 MHz (6.75Gbps) Supported Resolutions 480i / 480p / 720p / 1080i / 1080p60 Full HD: (1080p) ~ 35meter (115feet) (CAT5e) / 40meter (130feet) (CAT6) Resolution and Distance HD: (720p/1080i) ~ 50meter (165feet) (CAT5e) / 55meter (180feet) (CAT6) Audio Support Surround Sound (up to 7.1 Ch.) or Stereo Digital
Summary of the content on the page No. 10
Notice 1. If the DVI or HDMI device requires the EDID information, please use EDID Reader/Writer to retrieve and provide DVI/HDMI EDID information. 2. All HDMI over CAT5 transmission distances are measured using Belden 1583A CAT5e 125MHz LAN cable and ASTRODESIGN Video Signal Generator VG-859C.3 3. The transmission length is largely affected by the type of LAN cables, the type of HDMI sources, and the type of HDMI display. The testing result shows solid LAN cables (usually in bulk cable
Summary of the content on the page No. 11
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages
