Summary of the content on the page No. 1
H9998
Mix & Match
Musical Mobile
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
Requires four "C" (LR14) alkaline batteries for operation (not included).
Tool required for assembly: Phillips screwdriver (not included).
www.fi sher-price.com
Summary of the content on the page No. 2
Parts Arm 3 Discs Dome Clamp 3 Soft Toys Crib Adapter Base Frame Note: Tighten and loosen all screws with a Phillips screwdriver. Do not overtighten. WARNING Possible entanglement injury. Keep out of baby's reach. Remove mobile portion from crib or playpen when baby begins to push up on hands and knees. CAUTION This toy contains small parts in its unassembled state. Adult assembly is required. A crib mobile is intended for visual stimulation and is not to be grasped by a child. Remov
Summary of the content on the page No. 3
Battery Installation Battery Compartment Door Locate the battery compartment door on the back of the base. Loosen the screws in the battery compartment door and remove the battery compartment door Insert four "C" (LR14) alkaline batteries. Hint: We recommend using alkaline batteries for longer life. Replace the battery compartment door and tighten the screws . When sounds or light become faint or movement of the mobile is sluggish, it’s time for an adult to change the batteries!
Summary of the content on the page No. 4
Battery Safety Information 1.5V x 4 “C” (LR14) Shown Actual Size In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage: Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium). Insert batteries as indicated inside the battery compartment. Remove batteries during long periods of non-use. Always remove exhausted batteries from th
Summary of the content on the page No. 5
Assembly Fit the crib adapter to 11 the base. Tighten the three screws in the crib adapter. Crib Adapter Fit the peg on a disc onto 2 1 one of the posts on the frame, as shown. Disc Tighten the screw in the disc. Repeat this procedure to attach the other two discs to the frame. Frame 5
Summary of the content on the page No. 6
Assembly Fit the dome into the end 3 1 of the arm. Tighten the screw in Dome the dome. Arm "Snap" the frame to the 1 4 underside of the dome, as shown. Dome Frame 6
Summary of the content on the page No. 7
Assembly Slide the arm into the 5 1 opening in top of the base. Tighten the screw in the arm. You can attach the soft toys to 6 1 either the mobile (over baby's head) or to the base (inside the crib). Mobile Attachment Fit a soft toy strap up through a slot in a disk. Pull down on the strap so that the end forms a "T" on top of the disc. Repeat this procedure to attach the other two soft toys to the OR remaining discs. Base Attachment Fit the "T" on the end of each soft toy
Summary of the content on the page No. 8
Crib Attachment Fit the base on the crib 7 1 top rail, so that the Base threaded peg extends outside the crib. Crib Top Rail Fit the clamp onto the threaded peg and turn the clamp clockwise to secure the base to the crib rail. Do not over- tighten the clamp. Clamp WARNING To prevent entrapment of baby's head, keep distance between the bottom of the product and the crib mattress to at least 7 inches. If the distance between the toy and the mattress is less than 7 inches, lower t
Summary of the content on the page No. 9
Lights, Sounds and Gentle Motions Enjoy projected lights on baby's ceiling, soft music and gentle motions. Mode Switch Press to start or stop the motion. Press to turn lights on or off. Press to choose from classical musical selections. Press to choose lullabies. Locate the mode switch on the top of the base. Slide the switch to one of the following positions: Enjoy about 10 minutes of soft lights, Mode Switch motions and music at higher volume. Choose this position for lights, motions and mu
Summary of the content on the page No. 10
Change to a Crib Side Music Box When baby outgrows the mobile, follow these steps to convert to a music box with ceiling projection. Slide the latches on the 11 underside of the dome and pull to remove the frame. Set the frame aside. Bottom View Loosen the screw in the 1 2 arm and remove the arm from the base. 10
Summary of the content on the page No. 11
Change to a Crib Side Music Box Loosen the screw in the 3 1 dome and remove the dome from the arm. Set the arm aside. Slide the dome into the 1 4 slot in the top of the base so that the dome faces away from the crib. Tighten the screw in the dome. Store the arm and frame in a safe place. 11
Summary of the content on the page No. 12
Care Soft Toys Place the soft toys in a pillowcase and wash them in cold water on gentle cycle. Tumble dry on low heat. Do not use bleach. Mobile Base, Arm and Dome Wipe the toy with a clean cloth dampened with a mild soap and water solution. Do not immerse the toy. FCC Statement (United States Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protect
