Summary of the content on the page No. 1
User Manual
EURORACK
UB1202 /UB1002
Ultra-Low Noise Design 12/10-Input 2-Bus Mic/Line Mixer
with Premium Mic Preamplifiers and Multi-FX Processor
Summary of the content on the page No. 2
2 EURORACK UB1202FX/UB1002FX User Manual Table of Contents Thank you ....................................................................... 2 Important Safety Instructions ...................................... 3 Legal Disclaimer ............................................................. 3 Limited Warranty ........................................................... 3 1. Introduction ............................................................... 5 1.1 General mixing console functions ....
Summary of the content on the page No. 3
3 EURORACK UB1202FX/UB1002FX User Manual 9. Do not defeat the safety purpose of the polarized UNDERTAKING OR REPRESENTATION. THIS MANUAL Important Safety or grounding-type plug. A polarized plug has two blades IS COPYRIGHTED. NO PART OF THIS MANUAL MAY Instructions with one wider than the other. A grounding-type plug BE REPRODUCED OR TRANSMITTED IN ANY FORM has two blades and a third grounding prong. The wide OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, blade or the third prong are provided f
Summary of the content on the page No. 4
4 EURORACK UB1202FX/UB1002FX User Manual “Support” at behringer. com. If your country is not • connection or operation of the unit in any way (3) This warranty does not detract from the seller’s listed, please check if your problem can be dealt with that does not comply with the technical or safety obligations in regard to any lack of conformity of the by our “Online Support” which may also be found under regulations applicable in the country where the product and any hidden defect. “Support”
Summary of the content on the page No. 5
5 EURORACK UB1202FX/UB1002FX User Manual 1. Introduction Level-setting Congratulations! In purchasing our EURORACK UB1002FX/UB1202FX you have Signals fed into the mixer using a DI-box (Direct Injection) or the output of a acquired a mixing console whose small size belies its incredible versatility and sound card or a keyboard, often have to be adjusted to the operating level of audio performance. your mixing console. The BEHRINGER EURORACK mixing console offers you premium- Frequency response
Summary of the content on the page No. 6
6 EURORACK UB1202FX/UB1002FX User Manual ◊ Please always use the original packaging to avoid damage due to 2. Control Elements and Connectors storage or shipping. this chapter describes the various control elements of your mixing console. ◊ Never let unsupervised children play with the EURORACK or with All controls, switches and connectors will be discussed in detail. its packaging. 2.1 Mono channels ◊ Please dispose of all packaging materials in an environmentally-friendly fashion. 1 1.3.2
Summary of the content on the page No. 7
7 EURORACK UB1202FX/UB1002FX User Manual GAIN LEVEL Use the GAIN control to adjust the input gain. This control should always be the LEVEL control determines the level of the channel signal in the main mix. turned fully counterclockwise whenever you connect or disconnect a signal ◊ Attention: Since the FX path for the effect processor is connected source to one of the inputs. post-fader, the LEVEL control has to be turned up in order to get this The scale has 2 different value ranges: the fir
Summary of the content on the page No. 8
8 EURORACK UB1202FX/UB1002FX User Manual LEVEL Live PA systems: The LEVEL control determines the volume of the channel being sent to the A stereo dynamics processor (optional), stereo equalizer (optional) and the stereo main mix. power amplifier for full-range loudspeakers with passive crossovers. If you wish to use multi-way loudspeaker systems without an integrated +4/-10 crossover, you have to use an active crossover and several power amplifiers. The stereo inputs of the EURORACK have an
Summary of the content on the page No. 9
9 EURORACK UB1202FX/UB1002FX User Manual +48 V ◊ If you are recording a signal via the TAPE OUTPUT and wish to listen to this simultaneously via the CD/TAPE INPUT, do not use the CD/TAPE TO The red “+48 V” LED lights up when the phantom power is turned on. MIX switch. Doing this would create a feedback loop, since the signal Phantom power is required to operate condenser microphones and is activated would be routed, via the main mix, back to tape via the TAPE OUTPUT. using the +48 V switch
Summary of the content on the page No. 10
10 EURORACK UB1202FX/UB1002FX User Manual 3. Applications 3.1 Recording studio CD player MIDI sound module MD recorder Keyboard Active monitors BEHRINGER BEHRINGER TRUTH B2030A HPS300 Headphones Microphone BEHRINGER B-20 PRO Modeling amp BEHRINGER V-AMP3 Electric guitar BEHRINGER EURORACK UB1002FX Digital Audio Workstation Fig. 3.1: The UB1002FX in a recording studio Even though most of the tasks in a studio can nowadays be accomplished using Recording and playback: a computer, a mixing consol
Summary of the content on the page No. 11
11 EURORACK UB1202FX/UB1002FX User Manual 3.2 Live sound VIRTUALIZER PRO DSP2024P Fullrange loudspeaker cabinets EUROLIVE B1520PRO Keyboard Bass amplier ULTRABASS BXD3000H BEHRINGER HPS3000 Headphones Power amp EUROPOWER EP2000 Drum Computer Bass cabinet ULTRABASS BB410 COMPOSER PRO-XL MDX2600 Bass guitar ULTRAGRAPH PRO FBQ3102 Microphones BEHRINGER XM1800S MD recorder VIRTUBE VT50FX CD player Electric guitar BEHRINGER EURORACK UB1202FX Fig. 3.2: Live application of the UB1202FX This illustra
Summary of the content on the page No. 12
12 EURORACK UB1202FX/UB1002FX User Manual 4. Installation Balanced ¼" TRS connector strain relief clamp 4.1 Mains connection sleeve ring AC POWER IN tip Connect the power supply to the 3-pin mains connector on the rear of the console. Use the AC adapter supplied to connect the console to the mains. The adapter complies with all applicable safety standards. sleeve ground/shield ◊ Please use only the power supply unit provided with the console. ring ◊ Never connect the EURORACK to the power su
Summary of the content on the page No. 13
13 EURORACK UB1202FX/UB1002FX User Manual 2 Line Input Main Mix System Data Type 1/4" TRS connector Noise electronically balanced Main mix @ -∞, -105 dB / -108 dB A-weighted Impedance approx. 20 kΩ balanced Channel fader -∞ approx. 10 kΩ unbalanced Main mix @ 0 dB, -94 dB / -97 dB A-weighted Gain range -10 to +40 dB Channel fader -∞ Max. input level +20 dBu @ 0 dB Gain Main Mix @ 0 dB, -83 dB / -85 dB A-weighted 1 Fade-Out Attenuation (Crosstalk Attenuation) Channel fader @ 0 dB Main f
Summary of the content on the page No. 14
14 EURORACK UB1202FX/UB1002FX User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION EURORACK UB1202FX/UB1002FX Responsible Party Name: MUSIC Group Services US Inc. Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone/Fax No.: Phone: +1 425 672 0816 Fax: +1 425 673 7647 EURORACK UB1202FX/UB1002FX complies with the FCC rules as mentioned in the following paragraph: This equipment has been tested and found to comply with the limits for a Class B digital
Summary of the content on the page No. 15
We Hear You
