Summary of the content on the page No. 1
U ’
SER S
M
ANUAL
Thermal Transfer Bar Code Printer
CLP-7001
CLP-7002
CLP-7401
Summary of the content on the page No. 2
Chapter 1 Setup FCC COMPLIANCE STATEMENT FOR AMERICAN USERS This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residenti
Summary of the content on the page No. 3
Chapter 1 Setup EMI COMPLIANCE STATEMENT FOR CANADIAN USERS properly, that is, in strict accordance with the manufacturer's instructions, may cause Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This equipment installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television recepti
Summary of the content on the page No. 4
Chapter 1 Setup Important Safety Instructions 1. Read all of these instructions and save them for later r 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water. 5. t place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the product. 6. Slots and openings on the cab
Summary of the content on the page No. 5
Chapter 1 Setup Notice 1 . Before use, be sure to read this manual. And keep it handy for reference when needed. 2 . The contents of this manual may change without prior notice. 3 . Reproduction, transfer, or transmission of the contents of this manual without prior consent is strictly prohibited. 4 . We are not liable for any damage resulting from the use of the information contained herein, regardless of errors, omissions, or misprints. 5 . We are not liable for any problems resulting fr
Summary of the content on the page No. 6
Chapter 1 Setup SAFETY INSTRUCTIONS must be strictly observed ! To prevent personal injury or property damage, the following shall be strictly observed. The degree of possible injury and damage due to incorrect use or improperly following instructions is described below. Indicates a situation which, if not observed and handled WARNING properly, could result in death or serious injury. Indicates a situation which, if not observed and handled CAUTION properly, could result in injury. This
Summary of the content on the page No. 7
Chapter 1 Setup WARNING n Never perform the following. If not avoided, these may cause damage or trouble to the printer the printer is damaged or is malfunctioning, be sure to turn the power off immediately and remove the power cord from the outlet, then consult our service personnel. • Do not jolt or impact to the printer by stepping on, dropping or hitting the printer. • Do not place the printer in a poorly ventilated area, or shut off the air vent of the printer. • air is mixed with salt or
Summary of the content on the page No. 8
Chapter 1 Setup General Precautions 1 . Prior to operation, read the safety instructions carefully and observe them. 2 . 3 . Be careful when movi 4 . Make sure if you open the top cover, it is opened all the way. If only partially open, the 5 . When the cover is open, be careful of the corners of cover. They could cause injury. 6 . 7 . thinner, trichloroethylene, ketone or similar chemicals. 8 . 9 . spill liquids or spray insecticide on the printer. . Do not jolt or impact to the print
Summary of the content on the page No. 9
Chapter 1 Setup Precautions When Installing the Printer 1 . Prior to operation, read the safety instructions carefully and observe them. 2 . Do not use or store the printer near fire, excessive moisture, in direct sunlight, near an air 3 . 4 . 5 . The printer must sit on a firm, level surface where there is ample ventilation. Never allow the printer's air vent to be blocked by a wall or other object. 6 . of printer. 7 . Do not place the printer near a radio or television, and do not use
Summary of the content on the page No. 10
Chapter 1 Setup Contents Before Operation FCC COMPLIANCE STATEMENT FOR AMERICAN USERS ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 1 EMI COMPLIANCE STATEMENT FOR CANADIAN USERS ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 2 Important Safety Instructions ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 3 Notice ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅
Summary of the content on the page No. 11
Chapter 1 Setup 11
Summary of the content on the page No. 12
Chapter 1 Setup Contents Chapter 3 Paper and Ribbon 1 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 2 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 3 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 4 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 5 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 6 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅
Summary of the content on the page No. 13
Chapter 1 Setup Main Features High-speed, high-quality printing This printer adopts both a direct-thermal and thermal-transfer printing system with the line Precision printing for additional value: 400dpi IC and optimized driving technology for high-resolution printing are all available on Citizen additional front ( ) sensors, an amazingly high level of accuracy can be achieved; small sized labels, miniature bar Powerful control language A powerful yet simple to use control language is standar
Summary of the content on the page No. 14
Chapter 1 Setup 14
Summary of the content on the page No. 15
Chapter 1 Setup Model Description This manual is prepared for the three models, CLP-7001, CLP-7002 and CLP-7401. The main different points on the specifications among the three are shown below. Print resolution Prin speed Adjustable sensor - 2 -7 - 2 -6 - 1 4 - 15 Standard IPS 400dpi 7401 CLP Optional IPS 203dpi 7002 CLP Standard IPS 203dpi 7001 CLP ting Model
Summary of the content on the page No. 16
Chapter 1 Setup Chapter 1 Setup 1 Confirmation of Carton Contents 2 Part Names and Functions 3 Connection to Power 4 Connection to a Computer 16
Summary of the content on the page No. 17
Chapter 1 Setup 1 Confirmation of Carton Contents Ink ribbon Power cord Paper core Roll holder ’ s manual Cleaning pen Roll guide Label paper CAUTION • Be careful when moving or carrying the printer and when taking the printer out of the carton. The printer may cause injury or property damage if dropped. Be sure to grip the printer housing tightly when taking it out of the carton. Do not grip the printer by the foam packing material which may break, causing the printer to drop. 17 The empty
Summary of the content on the page No. 18
Chapter 1 Setup 2 Part Names and Functions Front view Cover Open lever Control panel Open guide Ribbon holder Ribbon winder Open guide lever To wind the ribbon after print. Roll holder Front sensors Holds the roll of paper. Roll guide Offset verification window Allows you to check the optimum position Paper holder 18 Holds the roll holder. (See Chapter 3.) of the print head. (See Chapter 4.) Chapter 3.) according to the width of the paper. (See Guides the rol
Summary of the content on the page No. 19
Setup 2 Part Names and Functions Rear view Power inlet Serial interface connector PCMCIA memory card cover Parallel interface connector To protect the PCMCIA memory card To connect the parallel interface cable. from exposure to dust and foreign Power switch matter. To install a PCMCIA memory card, first unhook this cover, then slide it CAUTION • When opening the cover, open it all the way. If only part way open, the cover could • Be careful of the edge of the cover when the c
Summary of the content on the page No. 20
Setup 2 Part Names and Functions Control panel LCD Stop key Paper gap adjustment control LEDs Black line adjustment control To adjust the black line sensor sensitivity. Pause key LCD contrast adjustment control . Feed key 17 Feeds the paper. To adjust the LCD contrast. Temporarily pauses printing other is the error indicator. One LED is the power indicator and the To adjust the paper gap sensor sensitivity. configuration settings, or an error message. Stops the print
