Summary of the content on the page No. 1
Toshiba MAGNIA™ 510D
Read-Me-First Addendum
Thank you for purchasing the Toshiba MAGNIA 510D.
This document explains the precautions for using your
MAGNIA 510D. To ensure the best performance,
please read this document carefully before configuring
the server.
Keep the document handy for future reference.
For the latest information and updates, please visit:
www.toshiba-tro.de
When using Windows NT Server 4.0
(1) Be sure to connect a mouse to the server.
If you
Summary of the content on the page No. 2
1) If the server is in operation, shut it down, switch off the power, and unplug the power cable. 2) Remove memory modules as needed to observe the 1,7 MB limit. 3) Install Windows NT Server 4.0 and Windows NT 4.0 Service Pack with the memory capacity at less than 1,7 MB. 4) After installing Windows NT server 4.0, please replace memory that is above than 1,7 MB. For installing and removing the memory modules, refer to MAGNIA User’s Guide (on the Documentation CD ROM), Chapter
Summary of the content on the page No. 3
If the "530LTX" label is attached on the connector panel: Connection Type: Auto-Negotiation Network Address: (Blank) If the no label is attached on the connector panel: Connection Type: Auto-Sense Network Address: (Blank) When using Windows 2000 Server (1) Be sure to connect a mouse to the server. If you use the server without a mouse, the keyboard may become inoperative. (2) Installing Windows 2000 Server to the server with an MO
Summary of the content on the page No. 4
When using NetWare 5.1 Follow the installation procedure described in the instruction manual to ensure that the installation is done properly. About expansion of optional RAID controller D When you use Server Setup Tool to setup the server with RAID controller D (MR466), the [Detailed Setup] option may not setup right. To set RAID configuration details with Server Setup Tool, use the following procedure. (1) When the message [Press to Run MegaRAID Configuration
Summary of the content on the page No. 5
(3) Open the Server Setup Tool [Main Menu], and click the [Setup] button to start setup wizard. When the [RAID Configuration screen] dialog box is displayed, check [Skip RAID Setup] check box, and continue the setup wizard. For setup wizard, refer to Server Setup Tool User's guide. (4) After setup, regarding the array that is installed on the OS, we recommend setting the logical drive's [Write Policy] setting to [WRBACK] using MegaRAID Configuration Utility or Power Console.
Summary of the content on the page No. 6
When attaching or removing the SCSI HDD/ SCSI devices When attaching the side covers, take care to prevent the cables from being nipped between the side cover and the server. About expansion of optional SCSI Host Adapter SCI1105W/J, SCI1107A/W/J and SCI3900U An OS may not start depending on the connection. Perform the following setting for the SCSI host adapter not connected to an HDD starting OS. (1) In the BIOS screen of SCSI Host adapter during start of system, press[Ctr
Summary of the content on the page No. 7
Components List Unpack and check components. If anything is missing, contact your dealer immediately. Save the packaging materials for possible future use. Components Quantity 1 MAGNIA 510D Server Setup Tool (SST) CD-ROM (CD-ROM) 1 Media Server Setup Tool (SST) Startup Disk (FD:1) 1 LANDesk Server Manager (LDSM) (CD-ROM) 1 MAGNIA 510D User’s Guide (Documentation CD ROM) 1 Documentation MAGNIA 510D Read-Me-First Addendum(This document) 1 Server Setup Tool (SST) User's
Summary of the content on the page No. 8
733MHz P3 256K CPU Kit-LA / 866MHz P3 256K CPU Kit-LA / 1GHz P3 256K CPU Kit-L Read-Me-First Please read the following sheet before you start using CPU Kit-LA on MAGNIA 510D. 1. About the system BIOS of MAGNIA510D Some CPU Kit-LA with maker S-Spec code cannot be used in MAGNIA 510D, which BIOS revision was before F6TJ. In this case, you must update your BIOS to latest revision. (A) Check your CPU Kit-LA’s maker S-Spec code by mark of CPU. R Pen
Summary of the content on the page No. 9
(B) Check System BIOS revision by POST messages. American Release:xx/xx/xxxx Megatrends AMIBIOS (C) 1999 American Megatrends Inc., 6VXD7 XX XX Check System Health ok , BIOS revision CPU ID:XXXX Patch ID:XXXX Pentium III XX-XXXMHz Check NVRAM… XXXXXKB OK Hit DEL if you want to run SETUP Wait… Press F1 to enter Dual BIOS Utility. Press ESC to quit ( C ) American Megatrends Inc., XX-XXXX-XXXXXX-XXXXXXXX-XXXXXX-XXXXXXXX-XX-XXXXXX-X (C) How to get the latest BIOS
Summary of the content on the page No. 10
[To view CPU Stepping levels on your computer] 1. Click “Start”, point to “Programs”, point to “Administrative” Tools, and then click “Computer Management”. 2. Double-click the “System Information” folder, and then click the “System Summary” folder. Check the Processor line to view the CPU Stepping levels. B0 Stepping : x86 Family 6 Model 8 Stepping 3 C0 Stepping : x86 Family 6 Model 8 Stepping 6 D0 Stepping : x86 Family 6 Model 8 Stepping 10 3. About the combination of D0-St
Summary of the content on the page No. 11
Contact Directory The List of contacts may change and not be necessarily complete because of the continuous launch of server. For updates of the contact information please refer to: http://www.csd.toshiba.com/cgi-bin/tais/support/ASP_Profile_Listing.jsp. Please also keep in mind that the warranty is only applicable to the country of first purchase. E.g if a server is sold by a German authorised dealer, the warranty is only valid in Germany. If you need service in another places than i
Summary of the content on the page No. 12
Denmark Toshiba Digital Media Naverland 27 DK-2600 Glostrup Tel: +45-3823 7600 Fax: +45-3823 7601 Internet: http://www.toshiba.dk Finland Scribona TPC Oy / Toshiba Digital Media Sinimäentie 8 A PL 83 SF-02630 Espoo Tel: +358-9 527 2555 Fax: +358-9 527 2500 Internet: http://www.toshiba.se France Toshiba Systemes (France) S.A. 7, Rue Ampere; B.P. 131 F - 92804 Puteaux Cedex Tel: +33-1-4728-2929 Fax: +33-1-4728-2247 Internet: www.toshiba.fr/pc
Summary of the content on the page No. 13
Greece IDEAL Electronics S.A. 190 Syngrou Ave. 176 71 Kalithea Tel: +30 - 1 - 95.62.551-4 Fax: +30-1-95.79.094 Ireland Toshiba Information Systems (U.K.) Limited (for Ireland) Toshiba Court: Addlestone Road KT15 2UL Weybridge, Surrey, UK Tel: +44-(0)1932-828828 Fax: +44-(0)1932-822958 BBS: +44-(0)1932-825127 Internet: http://www.toshiba.co.uk/computers/ Italy Tel etc: provided with purchase of server Luxemburg Toshiba Inf. Systems Benelux B.V. (for Lux
Summary of the content on the page No. 14
Netherlands Toshiba Inf. Systems Benelux Rivium Boulevard 41 NL - 2909 LK Capelle a/d IJssel Tel: +31-10-2882-300 Fax: +31-10-2882-390 Internet: http://www.toshiba.nl Norway Scribona Norway AS Stålfjæra 20 P.O.Box 51/Kalbakken N-0901 Oslo Tel: +47-22-897000 Fax: +47-22-897389 Internet: http://www.toshiba.se Poland AC Serwis Sp. z o. o. ul. Partyzantów 71 43-316 Bielsko-Biala Tel: +48-33-81 30-2 05 Fax: +48-33-81 30-2 09 Internet: http://www.acserwis.com.pl Romania SC
Summary of the content on the page No. 15
Spain Toshiba Inf. Systems (Espana) S.A. Parque Empresarial San Fernando Edificio Europa, 1a Planta, Escalera A E - 28831 Madrid Tel: +34-91-6606-700 Fax: +34-91-6606-760 Internet: http://www.toshiba.es Sweden Scribona Sweden AB P.O.Box 1374 Sundbybergsvägen 1 S-17127 Solna Tel: +46-200-212100 Fax: +46-8-7344656 Internet: http://www.toshiba.se United Kingdom Toshiba Information Systems (U.K.) Limited Toshiba Court Weybridge Business Park, Addlestone Road KT15 2UL We
