Summary of the content on the page No. 1
SGH-Z800 User’s Guide
•Read Health and safety information before using your device.
• The program screens and your device may appear different from the
screen images and the illustrations in this guide.
• Depending on the software installed or your service provider, the
descriptions in this guide may differ, and may change without notice.
Summary of the content on the page No. 2
Health and safety information Copyright © 2007 Samsung, Inc. All rights This is for users’ safety and property reserved. This guide may not be copied, protection. Read all safety guidelines reproduced, translated, or converted to any carefully and follow all instructions and electronic or machine-readable form in warnings. Failure to comply with them can whole or in part without written approval be dangerous or illegal. from Samsung, Inc. Do not use the device in potentially explosive e
Summary of the content on the page No. 3
H Health and safety information Do not use the device when it can Do not subject the device to shocks cause interference with RF signals or • Subjecting the device to shocks may when it can be dangerous cause damage or deform the shape of • All wireless phones may be susceptible the device. to interference from other electrical Keep it dry equipment that could affect performance. • Moisture or liquid can form inside the Remember to make backup copies of device, which may damage the device’
Summary of the content on the page No. 4
Health and safety information Do not leave the device in a closed car Keep it clean for a long time • Keep the USB connector clean to • The temperature in a car can reach prevent damage. Wipe it with a soft, dry 80° C, which can permanently damage cloth to clean. Do not use harsh your device. chemicals such as thinner and solvents. Use only Samsung-approved Be sure to follow all instructions and components and accessories precautions when connecting the device to your PC • Unapproved compon
Summary of the content on the page No. 5
Health and safety information • Use only the specified voltage. Non- specified voltages may cause the device to catch fire, give off an electrical shock, or damage the device. • Do not disconnect the device while initialising the modem, as it may cause the HSDPA Connection Manager to malfunction. • Do not remove the USIM card when the device is connected yo your PC, as it may cause the HSDPA Connection Manager to malfunction or damage the USIM card. 3
Summary of the content on the page No. 6
Contents Getting started Using basic functions Unpack .................................................... 6 Running the HSDPA Connection Manager program................................................. 12 Overview.................................................. 6 From the Start menu ............................................ 12 Inserting the USIM card............................ 7 From the desktop ................................................. 12 Removing the USIM card .................
Summary of the content on the page No. 7
Contents Using Phonebook................................... 18 Locking the USIM card .......................... 24 Adding a new contact............................................18 Changing the PIN................................... 24 Finding a contact ..................................................19 Copying or moving contacts...................................19 Accessing information............................ 25 Importing or exporting contacts..............................20 Using the i
Summary of the content on the page No. 8
Getting started Unpack Overview Status light Cover HSDPA USB Dongle Program CD USB connector User’s Guide Extension Cable 6
Summary of the content on the page No. 9
Getting started Inserting the USIM card Open the cover and insert the USIM card Removing the USIM card in the slot. The gold-coloured contacts on the card are face down. Important USIM card information • The USIM card and its contacts can be easily damaged by scratches or bending, so be careful when handling the card. • To prevent someone using your USIM card when it is stolen or lost, you can lock the card. See page 24. • To purchase a USIM card or subscribe to a network, contact your ser
Summary of the content on the page No. 10
Getting started Inserting an optional memory card 1. Pull the HSDPA USB dongle out of the cover completely. 2. Insert an optional memory card into the slot. The gold-coloured contacts on the card are face up. Important memory card information • Do not remove a card from the device while data is being accessed or transferred. This could result in loss of data and/or damage to the card or device. • Do not subject cards to strong shocks. • Do not touch card terminals with your fingers or metal
Summary of the content on the page No. 11
Getting started Inserting the HSDPA USB dongle into your PC 1. Insert the USIM card into the HSDPA USB dongle. 2. Open the cover and rotate the USB connector. 3. Close the cover and insert the HSDPA USB dongle into the USB port of your PC. If necessary, connect the dongle and your PC with the supplied extension cable. Note Connect the USB connector to the USB port carefully. Forcing the connector the wrong way may damage the USB connector or USB port. 9
Summary of the content on the page No. 12
Getting started Installing the USB driver and HSDPA Connection Manager program 1. Insert the supplied CD into the CD-ROM drive of your PC. The program launches automatically. 2. Click [Install Driver]. • The USB driver is installed. 3. Click [Finish]. 4. Select [No, I will restart my computer later.] and click [Finish]. • If you have installed the USB driver before, the option window may appear. Remove the installed driver, and install the supplied USB driver again. 5. Click [Install Connectio
Summary of the content on the page No. 13
Getting started Checking the USB driver 1. Insert the HSDPA USB dongle into the USB port of your PC. 2. Click [Start] and select [Settings] - [Control Panel] - [System] - [Hardware] - [Device Manger]. After the successful installation of the USB driver, Samsung USB Composite Device appears on the Device Manager window. 11
Summary of the content on the page No. 14
Using basic functions Running the HSDPA Connection Manager program From the Start menu Click [Start] and select [All programs] - [Samsung] - [Connection Manager] - [Connection Manager]. From the desktop Double-click the [Connection Manager] icon on the desktop. Using the tray icon 1. Right click the icon in the notification area. 2. Select the menu you want. • Open: open the HSDPA Connection Manager window. • Mass storage: open the folders of the inserted memory card and the HSDPA USB dongl
Summary of the content on the page No. 15
Using basic functions • Convert Modem mode: change to Modem mode which allows you to connect to the Internet, and send or receive text messages. • Minimize: minimize the open window. • Exit: exit the program. Connecting to the Internet Click [Connect to net] in the HSDPA Connection Manager window to connect to the Internet using the HSDPA network. You can check information about the current network connection at the bottom of the window. To end the connection with the Internet, click [Disconn
Summary of the content on the page No. 16
Using additional functions Using messages Send a text message and view the received messages. The EMS (Enhanced Messaging Service) and multimedia messages are not supported. Creating and sending a text message 1. Click [Text message] in the HSDPA Connection Manager window. 2. Click [Write]. 3. Enter the message text. • Click [Templates] to use the stored text. To create text templates, see page 16. 4. Enter the phone numbers in the Recipients list field. • Click [Phonebook] to retrieve numbers
Summary of the content on the page No. 17
Using additional functions Checking messages Access messages you have received, sent, or saved to send at a later time. To view the messages you have received: 1. Click [Text message] in the HSDPA Connection Manager window. 2. Click [Inbox] from SIM or PC. 3. Check the message you want. To view the messages you have sent: 1. Click [Text message] in the HSDPA Connection Manager window. 2. Click [Sentbox] from SIM or PC. 3. Check the message you want. 15
Summary of the content on the page No. 18
Using additional functions To view the messages that the device has failed to send or you have saved to send at a later time: 1. Click [Text message] in the HSDPA Connection Manager window. 2. Click [Drafts] or [Outbox] from SIM or PC. 3. Check the message you want. From any message folder, you can use the following message options: • Click [Reply] to reply to the sender. • Click [Forward] to forward the message to other people. • Click [Move] to move the message to My folders. • Click [Delete]
Summary of the content on the page No. 19
Using additional functions 3. Enter the text. • Click [ ] to enter emotions. 4. Click [ ] to save the template. Using My folder Create new folders and organise your messages. To create a new folder: 1. Click [Text message] in the HSDPA Connection Manager window. 2. Right click [My folders] from PC and select [Create folder]. 3. Enter the folder name and click [OK]. To move the message to my folder, check the message you want to move and click [Move]. 17
Summary of the content on the page No. 20
Using additional functions Using Phonebook Store phone numbers and search for them in Phonebook. Adding a new contact Add new contacts to Phonebook. 1. Click [Phonebook] in the HSDPA Connection Manager window. 2. Click [New]. 3. Select a location and enter the contact information. • Click [Create] to create a new group. 4. Click [Save]. 18
