Summary of the content on the page No. 1
Xtreme/SBC PCIe/104 Single Board Computer
& PCIe/104 Qseven Carrier Board
User Manual
Connect Tech Inc.
42 Arrow Road
Guelph, Ontario
N1K 1S6
Tel: 519-836-1291
Toll: 800-426-8979 (North America only)
Fax: 519-836-4878
Email: sales@connecttech.com
support@connecttech.com
Web: www.connecttech.com
CTIM-000058 Revision 0.02 March 8, 2011
1
Summary of the content on the page No. 2
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Table of Contents Customer Support Overview .......................................................................................................................... 4 Contact Information........................................................................................................................................ 4 Limited Lifetime Warranty ......................................
Summary of the content on the page No. 3
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Battery..................................................................................................................................................................... 23 Description ....................................................................................................................................................23 Connector & LEDs ......................................
Summary of the content on the page No. 4
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Customer Support Overview If you experience difficulties after reading the manual and/or using the product, contact the Connect Tech reseller from which you purchased the product. In most cases the reseller can help you with product installation and difficulties. In the event that the reseller is unable to resolve your problem, our highly qualified support staff can assist you. Our s
Summary of the content on the page No. 5
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Limited Lifetime Warranty Connect Tech Inc. provides a Lifetime Warranty for all Connect Tech Inc. products. Should this product, in Connect Tech Inc.'s opinion, fail to be in good working order during the warranty period, Connect Tech Inc. will, at its option, repair or replace this product at no charge, provided that the product has not been subjected to abuse, misuse, accident, disas
Summary of the content on the page No. 6
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Introduction Connect Tech’s Xtreme/SBC is a small embedded carrier board that utilizes the PCI/104-Express form factor, which has the standard PC/104 dimensions with 4 x1 PCIe lanes. This carrier board includes the required connectors and cables for easy connection to 2x SATA, 2x RS-232, 2x RS- 422/485, 4x USB 2.0, 1x Gigabit Ethernet, LVDS and VGA Video. The PCIe/104 Single Board Com
Summary of the content on the page No. 7
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual System Block Diagram The Qseven module implements the core processing features including: processor, memory, and system physical interfaces via the southbridge. Many of the Qseven modules are based on the mobile Intel Atom architecture (Z series processor + Poulsbo / SCH US15W chipset); shown in the block diagram below. This document will generally refer to the features of the US15W.
Summary of the content on the page No. 8
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Hardware Description Connector Locations PCI/104-Express Single Board Computer – Top PCI/104-Express Single Board Computer – Bottom Connector Summary Jumper Summary Location Connection P1 Q7 P2 PCIe-104 Jumper Function P3A, P3B USB J1 PS/2 power P4 GBE J2 Fan Power P5 VGA J3 Fan PWM polarity P6 ATX Power J4 LVDS panel power P7 LVDS Video LVDS backlight P8 LVDS Backligh
Summary of the content on the page No. 9
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Qseven Module Interface Description The processor and Chipset are implemented on the Qseven CPU module, which connects to the Xtreme/SBC via a MXM connector. As previously mentioned, many of the existing Qseven Modules use the Intel Atom mobile architecture, Z series processor + Poulsbo / SCH US15W chipset. The Xtreme/SBC implements a subset of the Qseven features, as describe in the
Summary of the content on the page No. 10
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual LVDS Description The Xtreme/SBC provides dual 18 or 24 bit LVDS display channels via P7, which are connected directly from the Qseven module . LVDS panel supply power is selected with jumper J4 and backlight power is selected with jumper J6. Both are current limited to 500 mA. US15W: The US15W provides only a single 18 or 24 bit display channel. Each LVDS data pair carries two bit
Summary of the content on the page No. 11
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Function LVDS backlight power Location P8 Hirose DF13-8P-1.25H connector Type Pinout Pin Signal Description 1 +12V +12 V DC, max. 1A 2 +12V +12 V DC, max. 1A 3 +5V +5 V DC, max. 1A 4 +5V +5 V DC, max. 1A Backlight enable, 5 LVDS_BLEN level selected with J4 Back light power, 6 VCC_BKL selected with J6 7 GND Digital ground 8 GND Digital ground Function LVDS backlight po
Summary of the content on the page No. 12
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Function LVDS backlight enable polarity Selects either positive or negative. Refer to the inverter power supply documentation for proper configuration. Location J5 Type 1x2 2mm jumper block Pinout Position Description off Positive polarity on Negative polarity Default Positive polarity Gigabit Ethernet Description The gigabit Ethernet interface’s controller (MAC + PHY) is
Summary of the content on the page No. 13
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual USB 2.0 Description The Xtreme/SBC implements 4 of the 8 available USB 2.0 connections via two connectors. Over current protection and power supply filtering is provided. Only the USB host features of the Qseven specification have been implemented, USB client features are not supported. Connector Function USB 2.0 x2 Locations P3A, P3B Hirose DF13-8P Type Pinout Pin Signal Desc
Summary of the content on the page No. 14
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Connector & LEDs Function SATA host Locations P10A, P10B P10A Industry standard right angle sata host connector Type Molex 0470804005 (or equivalent) Pinout Pin Signal 1 GND 2 SATA_TX_P P10B 3 SATA_TX_N 4 GND 5 SATA_RX_N 6 SATA_RX_P 7 GND Function SATA Status LEDs Locations Pin Signal D13 Activity PCI/104-Express Description The Xtreme/SBC provides 4 x1 PC
Summary of the content on the page No. 15
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Pin Description Pin Description Pin Description 1 N/C 53 WAKE# 105 N/C 2 PE_RST# 54 PEG_ENA# 106 N/C 3 +3.3V 55 GND 107 GND 4 +3.3V 56 GND 108 GND 5 N/C 57 N/C 109 N/C 6 N/C 58 N/C 110 N/C 7 N/C 59 N/C 111 N/C 8 N/C 60 N/C 112 N/C 9 GND 61 GND 113 GND 10 GND 62 GND 114 GND 11 PEx1_1Tp 63 N/C 115 N/C 12 PEx1_0Tp 64 N/C 116 N/C 13 PEx1_1Tn 65 N/C 117 N/C 14 PEx1_0Tn 66 N/C 118 N/
Summary of the content on the page No. 16
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual PCI-104 top mount – mechanical only, does Function not carry signals Locations P12 Industry standard Type EPT 264-60303-02 Connector is not populated by default. Note Can be installed on request. LPC Super I/O The Xtreme/SBC implements many low speed legacy I/O features with the SMSC SCH3114 Super I/O, which is connected to the Qseven module via the LPC (Low Pin Count) bus.
Summary of the content on the page No. 17
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Serial Description Two RS232 serial ports are provided on P9 and two RS485 serial ports are provided on P11. For the RS485 ports, the default configuration is full duplex without any bias or termination. Various resistors configurations can be populated to enabled TX and RX termination as well as RTS control. The following diagram shows the available configuration options. Contact Con
Summary of the content on the page No. 18
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Connectors Function RS232 x2 Locations P9 Type 2x10 2mm header Pinout Pin Signal Pin Signal 1 DCD1 2 DSR1 3 RXD1 4 RTS1 5 TXD1 6 CTS1 7 DTR1 8 RI1 9 GND 10 N/C 11 DCD2 12 DSR2 13 RXD2 14 RTS2 15 TXD2 16 CTS2 17 DTR2 18 RI2 19 GND 20 N/C Function RS485 x2 Locations P11 Type 2x10 2mm header Pinout Pin Signal Pin Signal N/C 1 RXD0+ 2 N/C 3 TXD0+ 4 N/C 5 TXD0- 6
Summary of the content on the page No. 19
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual PS/2 Keyboard and Mouse Description A PS/2 keyboard and PS/2 mouse interface are provided via P13; where the PS/2 voltage is selectable with J1. Refer to the specification printed on the bottom of the keyboard and mouse to determine which voltage to select; in most cases this is 5V. Connectors & Jumpers Function PS/2 Keyboard and Mouse Locations P13 Type Molex 0532610671 connector
Summary of the content on the page No. 20
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Power Description The Xtreme/SBC is designed to be powered from an ATX type power supply, and support many of the ACPI features like suspend to RAM. A CR1225 battery holder (P16) provides the VBAT for the Qseven module. The Xtreme/SBC generates 3.3V on board, to facilitate alternate powering options. WARNING: Do not attach a PCIe-104 power supply to P2 (the PCIe104 connector).
