Summary of the content on the page No. 1
Intel® Mobile Board MGM45WU
Product Guide
Order Number: E41916-002
Summary of the content on the page No. 2
Revision History Revision Revision History Date ® -001 First release of the Intel Mobile Board MGM45WU Product Guide July 2008 ® -002 Second release of the Intel Mobile Board MGM45WU Product Guide August 2008 If an FCC declaration of conformity marking is present on the board, the following statement applies: FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful i
Summary of the content on the page No. 3
Preface This Product Guide gives information about board layout, component installation, BIOS ® update, and regulatory requirements for Intel Mobile Board MGM45WU. Intended Audience The Product Guide is intended for technically qualified personnel. It is not intended for general audiences. Use Only for Intended Applications All Intel Mobile Boards are evaluated as Information Technology Equipment (I.T.E.) for use in personal computers (PC) for installation in homes, offices, schools,
Summary of the content on the page No. 4
Intel Mobile Board MGM45WU Product Guide Terminology The table below gives descriptions of some common terms used in the product guide. Term Description GB Gigabyte (1,073,741,824 bytes) GHz Gigahertz (one billion hertz) KB Kilobyte (1024 bytes) MB Megabyte (1,048,576 bytes) Mbit Megabit (1,048,576 bits) MHz Megahertz (one million hertz) iv
Summary of the content on the page No. 5
Contents 1 Mobile Board Features Mobile Board Components...................................................................................11 Processor..........................................................................................................17 System Memory.................................................................................................17 ® Intel GM45 Express Chipset ...............................................................................18 Intel GM
Summary of the content on the page No. 6
Intel Mobile Board MGM45WU Product Guide 2 Installing and Replacing Mobile Board Components Before You Begin ...............................................................................................35 Installing a Processor .........................................................................................37 Installing the Thermal Module..............................................................................38 Attaching the I/O Bezel........................................
Summary of the content on the page No. 7
Contents EMC Regulations ................................................................................................88 Ensure Electromagnetic Compatibility (EMC) Compliance..................................89 Product Certifications..........................................................................................90 Board-Level Certification Markings ................................................................90 Chassis and Component Certifications............................
Summary of the content on the page No. 8
Intel Mobile Board MGM45WU Product Guide Tables 1. Feature Summary.......................................................................................... 9 2. Intel Mobile Board MGM45WU Components (top) ..............................................12 3. Intel Mobile Board MGM45WU Components (bottom) .........................................14 4. Intel Mobile Board MGM45WU I/O Ports ...........................................................15 5. Expansion Board A Components ...........
Summary of the content on the page No. 9
1 Mobile Board Features ® This chapter briefly describes the features of Intel Mobile Board MGM45WU. Table 1 summarizes the major features of the Mobile Board. Table 1. Feature Summary Rich Creek 2 standard (220 mm x 213 mm) form factor Board Dimensions ® Processor Support for Intel Core™2 Duo mobile processors with a ® ® 1066/800 FSB and Intel Celeron mobile processors with a 667 FSB via an mPGA479 socket System Memory • Two 200-pin, DDR2 SDRAM Small Outline Dual Inline Memory Modu
Summary of the content on the page No. 10
Intel Mobile Board MGM45WU Product Guide Table 1. Feature Summary (continued) • Two 300 Mb/s SATA interfaces: one supporting a hard disk drive Storage and one supporting an optical disk drive Embedded • Winbond* WPC8763L Mobile Embedded Controller which provides Controller the following: ― Keyboard control ― Touch pad ― Thermal module fan control ― SPI Flash interface ® BIOS • Intel Extensible Firmware Interface (EFI) BIOS • Support for SMBIOS ® • Intel Rapid BIOS Boot ® • Intel E
Summary of the content on the page No. 11
Mobile Board Features Mobile Board Components Figure 1 shows the location of the major components on the top side of Intel Mobile Board MGM45WU; Table 2 identifies the components. Figure 1. Intel Mobile Board MGM45WU Components (top) 11
Summary of the content on the page No. 12
Intel Mobile Board MGM45WU Product Guide Table 2. Intel Mobile Board MGM45WU Components (top) Label Description A ExpressCard/34 slot B Power button C LVDS/Lid connector D Analog microphone E ID expansion connector A F Keyboard connector G ID expansion connector B (fingerprint reader) H Touch pad connector I Touch pad buttons J Battery LED K Machine status LED L Hard disk drive LED M Caps lock LED N Num lock LED O Wireless LED P Bluetooth LED 12
Summary of the content on the page No. 13
Mobile Board Features Figure 2 shows the location of the major components on the bottom side of Intel Mobile Board MGM45WU; Table 3 identifies the components. Figure 2. Intel Mobile Board MGM45WU Components (bottom) 13
Summary of the content on the page No. 14
Intel Mobile Board MGM45WU Product Guide Table 3. Intel Mobile Board MGM45WU Components (bottom) Label Description A DVI-I connector B USB 2.0 connector C RJ-11 (telephone) connector D Modem (MDC) connector E CMOS battery F BIOS configuration jumper G Processor socket H Modem connector I Thermal module fan connector J PCI Express full-mini card connector K Speakers connector L Expansion Board B connector M Bluetooth connector N Hard disk drive (SATA) connector O PCI Express half
Summary of the content on the page No. 15
Mobile Board Features Figure 3 is a side view of the Mobile Board showing its I/O ports; Table 4 identifies the ports. Figure 3. Intel Mobile Board MGM45WU I/O Ports Table 4. Intel Mobile Board MGM45WU I/O Ports Label Description A ExpressCard/34 slot B RJ-11 connector C USB 2.0 connector D DVI-I connector Figure 4 shows the location of the major components on the top and bottom of Expansion Board A; Table 5 identifies the components. Figure 4. Expansion Board A Components 1
Summary of the content on the page No. 16
Intel Mobile Board MGM45WU Product Guide Table 5. Expansion Board A Components Label Description A Expansion Board A connector B Expansion Board A board-to-board connector C DC power jack D RJ-45 (LAN) connector E USB 2.0 connector F USB 2.0 connector G Audio mute button H + Volume button I – Volume button J Wireless radio on/off button K Launch Internet browser button Figure 5 is a side view of Expansion Board A showing its I/O ports; Table 6 identifies the ports. Figure 5.
Summary of the content on the page No. 17
Mobile Board Features Processor ® Intel Mobile Board MGM45WU supports the following Intel processors in the mPGA479 package: • Intel Core 2 Duo mobile processors with a 1066/800 FSB • Intel Celeron mobile processors with a 667 FSB Processors are not included with the Mobile Board and must be purchased separately. For instructions on installing a processor, go to page 37 in Chapter 2. System Memory NOTE ® To be fully compliant with all applicable Intel SDRAM memory specifications
Summary of the content on the page No. 18
Intel Mobile Board MGM45WU Product Guide ® Intel GM45 Express Chipset The Intel GM45 Express Chipset consists of the following devices: • Intel GM45 Express Chipset Graphics and Memory Controller Hub (GMCH) with Direct Media Interface (DMI) • Intel 82801IEM ICH9 Mobile Enhanced (Intel ICH9M-E) I/O Controller Hub The GMCH provides interfaces to the processor, memory, and the DMI interconnect. The component also provides integrated graphics capabilities supporting 3D, 2D, and display capa
Summary of the content on the page No. 19
Mobile Board Features Mobile Embedded Controller The Winbond* WPC8763L Mobile Embedded Controller features the following: • Low pin count (LPC) interface • Fan speed closed loop control via Pulse Width Modulation (PWM) • Keyboard/mouse controller • Touch pad controller ® Intel Turbo Memory The Mobile Board provides support for Intel Turbo Memory by providing two onboard PCI Express Mini Card connectors in which an Intel Turbo Memory card can be installed: one half-mini and one full-min
Summary of the content on the page No. 20
Intel Mobile Board MGM45WU Product Guide Go to the following locations for more information about: • Audio drivers and utilities http://support.intel.com/support/mobile • Location of the onboard audio connectors see , Figure 2 on page 13 Touch Pad Support The Mobile Board supports a Touch Pad for cursor control. The Touch Pad is preinstalled in the chassis. The Mobile Board includes a Touch Pad connector (Figure 1, G) and two Touch Pad button switches (Figure 1, H). The Touch Pad and
