Summary of the content on the page No. 1
User’s Guide
Network Monitor
N1742L
N1742LP
N1942L
Make sure to read the Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for future reference.
See the label attached on the product and give the information to your
dealer when you ask for service.
With LG Network Monitor, some PC programs may not be compatible
or need to be modified due to different kind of operation.
Please check the compatibility in advance, before purchasing or installing th
Summary of the content on the page No. 2
Accessories !!! Thank for selecting LGE products !!! Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. 15-pin D-Sub Signal Cable User's Guide/Cards (To set it up, this signal cable may be attached to this product before shipping out.) and Lan cable and EMI Core Power Cord (Depending on the country) (These items are not included for all models.) IMPORTANT This accessories may look different from those shown here. User must use
Summary of the content on the page No. 3
Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national stan
Summary of the content on the page No. 4
Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures wh
Summary of the content on the page No. 5
Important Precautions On Cleaning Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benz
Summary of the content on the page No. 6
Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting the stand 1. Place the monitor with its front facing downward on a soft cloth. 2. Assemble the Stand Body into the product in the correct direction as shown in the picture. Make sure you push it until you hear it “click”. Hinge Body Stand Body 3. Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction. St
Summary of the content on the page No. 7
Connecting the Display Disassembling the stand 1. Put a cushion or soft cloth on aflat 2. Place the monitor face Down on the surface. cushion or soft cloth. 3. Change your lock on the product as it follows and turn it in the arrow direction. If you can't release the stand base even the locking knob is at a release position, Please push the indicated knob down and retry it. 4. Pull out the Stand to remove. A5 A5
Summary of the content on the page No. 8
Connecting the Display 5. Pushing the PUSH button, Take the stand base from stand body. Warning: You can hurt your finger. Good Position Bad Position Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5˚~20˚ When adjusting the angle of the screen, do not put your finger(s) in b
Summary of the content on the page No. 9
Connecting the Display Using the Computer NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown. A 1. Connect D-sub(RGB Analog) Cable (PC) B Connect D-sub(RGB Analog) Cable (Mac) Analog signal X-PORT D-sub Wall-outlet type A B (This item must be purchased separately.) Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector o
Summary of the content on the page No. 10
Connecting the Display Using the Monitor 1. Make sure to turn off the computer and product. Connect the cable as below sketch map form to . 1 2 1 Connect peripheral devices 2 Connect LAN Cable (X550 port) Analog signal X-PORT D-sub Wall-outlet type Keyboard/Mouse Input LAN cable should be connected before boo- ting PC.(This item must (Make sure to connect X550 be purchased separately.) port,not LAN port of PC) X550 port Up to 5 ports are supported per X550 PCI Card. Up to 5 por
Summary of the content on the page No. 11
Connecting the Display NOTE LAN Cable -For the LAN cable,it is recommended to use SFTP (recommend : 6m, max : 10 m) provided by LG. Image quality and some functionality may be degraded if a different LAN cable is used. -To achieve good image quality,avoid using UTP and STP cables. -You must use a direct LAN cable,not a crossover one. Both connections should be same colors. Do not connect any kind of network devices. Core The ferrite core can be used to reduce electromagnetic waves when connectin
Summary of the content on the page No. 12
Connecting the Display Connecting to a X550 port using a LAN cable. Notice Turning the power off while booting the PC may damage the product. Turning the power off while booting the PC may cause it to operate incorrectly. If the mouse is connected using a USB device and is not detected, disconnect and connect it again. If you reconnect a peripheral device such as a keyboard, mouse or LAN cable while the PC is in operation, the device may not work properly. Make sure that the power is turned off
Summary of the content on the page No. 13
Control Panel Functions Front Panel Controls MENU AUTO/SET SOURCE VOLUME Control Function Use this button to enter or exit from the On Screen Display. MENU Button OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that these settings are not inadvertently changed. To lock the OSD settings, press and hold the MENU button for several seconds. The message "OSD LOCKED" appears. You can unlock the OSD settings at any time by pushing the MENU button for several secon
Summary of the content on the page No. 14
Control Panel Functions Control Function Use these buttons to select or adjust functions in the SOURCE On Screen Display. Use this button to make either D-Sub or X-PORT connector active. This feature is used when two input sources are connected to the display. VOLUME Use these buttons to select or adjust functions in the On Screen Display. • X-PORT : When X-PORT signal is active,Use button to decrease or increase the speaker volume on X-PORT input. • D-sub : This menu is not available
Summary of the content on the page No. 15
On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. NOTE Allow the display to stabilize for at least 30 minutes before making image adjustments. To make a
Summary of the content on the page No. 16
On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. Main menu Sub-menu A X Reference BRIGHTNESS PICTURE To adjust the brightness, contrast and gamma of the CONTRAST screen GAMMA sRGB To customize the color of COLOR PRESET 6500K the screen 9300K RED GREEN BLUE To adjust the position of the HORIZONTAL POSITION screen VERTICAL CLOCK TRACKING To improve the clarity and PHASE stability o
Summary of the content on the page No. 17
On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears. Main Menu MENU : Exit : Adjust (Decrease/Increase) SET : Enter Menu Name : Select another sub-menu : Restart to select sub-menu Button Tip Menu Name Sub-menus Icons NOTE OSD (On Scre
Summary of the content on the page No. 18
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PICTURE To adjust the brightness of the screen. BRIGHTNESS To adjust the contrast of the screen. CONTRAST Set your own gamma value. : -50/0/50 GAMMA On the monitor, high gamma values display whitish images and low gamma values display blackish images. MENU : Exit : Decrease : Increase SET : Select another sub-menu COLOR PRESET • sRGB: Set the screen color to fit the SRGB standard color specification. • 6500K: Sligh
Summary of the content on the page No. 19
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description POSITION To move image left and right. HORIZONTAL To move image up and down. VERTICAL MENU : Exit : Decrease : Increase SET : Select another sub-menu TRACKING CLOCK To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. PHASE To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of charac
Summary of the content on the page No. 20
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description SETUP To choose the language in which the LANGUAGE control names are displayed. OSD To adjust position of the OSD window POSITION on the screen. WHITE If the output of the video card is different BALANCE from the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to
