Summary of the content on the page No. 1 
                    
                         
INSTALLATION, USE & CARE MANUAL  
 
30” FREESTANDING DUAL FUEL RANGES 
 
 
 
 
Models X304PIRX  [M7S0PTU(4,6)X(2,5)D] 
Models X304PIRBI [M7S0PTU(4,6)W(2,5)D] 
Models X304PIRCR  [M7S0PTU(4,6)D(2,5)D] 
Models X304PIRGI  [M7S0PTU(4,6)I(2,5)D] 
Models X304PIRRO  [M7S0PTU(4,6)R(2,5)D] 
Models X304PIRVI  [M7S0PTU(4,6)L(2,5)D] 
Models X304PIRVE  [M7S0PTU(4,6)V(2,5)D] 
Models X304PIRBL  [M7S0PTU(4,6)U(2,5)D] 
Models X304PIRNE  [M7S0PTU(4,6)N(2,5)D] 
 
 
 
 
 
 
 
                                      
                    
                    Summary of the content on the page No. 2 
                    
                        From the desk of the President    Dear new owner of a Bertazzoni product,  I want to thank you for choosing one of our  beautiful PRO ranges. We know that you have many  brands and products to choose from and we are  thrilled that you have decided to take one of your   products into your home.    We take as much pride in making our ranges as we    hope you will in owning them. My family started    manufacturing cooking appliances in 1882. Each of  BERTAZZONI SpA  our products is a blend of Itali
                    
                    Summary of the content on the page No. 3 
                    
                          TABLE OF CONTENTS  WARRANTY AND SERVICE........................................................................................................................................ 5  CUSTOMER SERVICE.......................................................................................................................................................5  REPLACEMENT PARTS ...................................................................................................................................
                    
                    Summary of the content on the page No. 4 
                    
                        BAKE ..................................................................................................................................................................... 29  PREHEATING THE OVEN ..................................................................................................................................... 29  GETTING THE BEST RESULTS .............................................................................................................................. 29  BAKEWARE TY
                    
                    Summary of the content on the page No. 5 
                    
                        WARRANTY AND SERVICE  All Bertazzoni products carry a 2 year parts and labour warranty.  Service on all Bertazzoni products shall be carried out by factory ‐trained professionals only.  For warranty service please contact Customer Service at the numbers indicated below.      CUSTOMER SERVICE  English/Spanish hotline  (866) 905 ‐0010  French    (800) 561 ‐7625  Fax    (714) 428 ‐0040  Email   BERTAZZONIHELP@SERVICEPOWER.COM    Mailing address    SERVICEPOWER  1503 South Coast drive  Suite 320  Co
                    
                    Summary of the content on the page No. 6 
                    
                        IMPORTANT SAFETY INFORMATION  PLEASE READ AND FOLLOW THESE IMPORTANT INSTRUCTIONS FOR THE SAFETY OF YOUR HOME AND OF  THE PEOPLE LIVING IN IT.  Save this Manual for local electrical inspector’s use.   Read and save these instructions for future reference.  Observe all governing codes, ordinances and regulations.  WARNING!  If the information in this manual is not followed exactly, a fire or explosion may result causing property  damage, personal injury or death.  Do not store or use gasoline or 
                    
                    Summary of the content on the page No. 7 
                    
                        WARNING!  Read this instruction booklet before installing and using the appliance.  The manufacturer will not be responsible for any damage to property or to persons caused by incorrect  installation or improper use of the appliance.  The manufacturer reserves the right to make changes to its products when considered necessary and  useful, without affecting the essential safety and operating characteristics.  This appliance has been designed for non ‐professional, domestic use only.  Do not use 
                    
                    Summary of the content on the page No. 8 
                    
                        PRODUCT SPECIFICATIONS  Dimensions (insert drawings front, side and back)      Weight       Burner power  Auxiliary 3400 BTU/h  Semi ‐rapid 6100 BTU/h  Rapid 10400 BTU/h  Dual burner (inner) 2800 BTU/h  Dual burner ( outer) 12000 BTU/h   8                                                                                                                                                                                                                                                                     
                    
                    Summary of the content on the page No. 9 
                    
                            WARNING!  BEFORE INSTALLATION   Do not use aerosol sprays in the vicinity of this  This appliance shall only be installed by an  appliance while it is in operation  authorized professional.   ROOM VENTILATION: An exhaust fan may be  This appliance shall be installed in accordance  used with the appliance; in each case it shall be  with the manufacturer’s installation instructions.  installed in conformity with the appropriate  This appliance must be installed in accordance national and local
                    
                    Summary of the content on the page No. 10 
                    
                        INSTALLING THE LEGS INSTALLING THE WORKTOP  FRONTGUARD   Bertazzoni ranges must be used only with the  legs properly installed.  To increase the clearance between the front edge  of the worktop and the burners it is possible to  Four height ‐adjustable legs are shipped with the  install the worktop front guard shipped with the  range in the polystyrene container situated over  appliance.   the appliance.  To install the front guard, hold it with the pointed  Before installing the legs, position 
                    
                    Summary of the content on the page No. 11 
                    
                        2 lateral screws from the bottom.   INSTALLING THE BACKGUARD  The back guard must be installed prior to  operation of the appliance for appropriate  ventilation of the oven compartment.   The supplied back guard is a 2 ‐part assembly. The  box also contains a set of metal screws for  securing the back guard to the worktop.        Disassemble the back guard and position the  front part on the worktop. Align the screw holes  with the corresponding holes at the back of the  worktop.      If the hol
                    
                    Summary of the content on the page No. 12 
                    
                        INSTALLING THE ANTI ‐TIP Stability DEVICE  INSTALLATION REQUIREMENTS  The anti ‐tip bracket shipped with the range must  be properly secured to the rear wall as shown in    the picture below.   ELECTRICAL  The height of the bracket from the floor must be  determined after the range legs have been  A properly grounded and horizontally ‐mounted  adjusted to the desired height and after  the  electrical receptacle Type NEMA 14 ‐50R should  range has been levelled.   be installed no higher than 3" (
                    
                    Summary of the content on the page No. 13 
                    
                            EXHAUST HOOD INSTALLATION  INSTALLATION ADJACENT TO KITCHEN  This range will best perform when used with PRO  CABINETS  line Bertazzoni exhaust hoods. These hoods have  This range may be installed directly adjacent to  been designed to work in conjunction with the  existing countertop high cabinets (36" or 91.5 cm  Bertazzoni range and have the same finish for a  from the floor).   perfect look.   For the best look, the worktop should be level  For maximum performance, the height of the  wit
                    
                    Summary of the content on the page No. 14 
                    
                        ‐ Connect the NEUTRAL receptacle terminal to  ELECTRICAL CONNECTION  the incoming NEUTRAL (WHITE) electrical  The appliance shall be connected to a single  supply wire  phase electric line rated at 120/208Vac or  ‐ Connect the GROUND receptacle terminal to  120/240Vac and 60Hz frequency.  the incoming GROUND (GREEN) electrical    supply wire  Electric power rating:    ‐ 120/208Vac: 4400 Watt or 21 A max.  OPTION 2 - THREE-Wires connection:   ‐ 120/240Vac: 5500 Watt or 24 A max.    ‐ Connect the 
                    
                    Summary of the content on the page No. 15 
                    
                        4) Loose strain relief by unscrewing the two   strain relief's screws as in diagram.              5)  Remove damaged supply cord set by taking  off the 4 electrical connection screws (block  L1, N, L2 and Ground screw, see diagram)  6)  Insert the new supply cord set in the strain  relief and lock it with two strain relief's  screws in suitable position.  7)  Fix well the ring terminals G, L1, N, L2 of the  new supply cord set as shown in diagram  with its 4 screws  8)  Re ‐install the back encl
                    
                    Summary of the content on the page No. 16 
                    
                           WARNING!    ELECTRICAL SHOCK HAZARD    Disconnect electrical power at the circuit    breaker box or fuse box before installing the    appliance.     Provide appropriate ground for the appliance.    Use copper conductors only.    Failure to follow these instructions could result  in serious injury or death            CAUTION    Label all wires prior to disconnecting when    servicing controls. Wiring errors can cause  improper and dangerous operation.    Verify proper operation after servicing
                    
                    Summary of the content on the page No. 17 
                    
                        WIRING DIAGRAM             17                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       
                    
                    Summary of the content on the page No. 18 
                    
                        MANUAL SHUT ‐OFF VALVE  GAS CONNECTION  THIS VALVE IS NOT SHIPPED WITH THE  All gas connections must comply with national  APPLIANCE AND MUST BE SUPPLIED BY THE  and local codes. The gas supply line (service)  INSTALLER.  must be the same size or greater than the inlet  The manual shut ‐off valve must be installed in  line of the appliance. This range uses a 1/2" NPT  the gas service line between the gas hook ‐up on  inlet (see drawing below for details of gas  the wall and the appliance inlet, 
                    
                    Summary of the content on the page No. 19 
                    
                           GAS CONVERSION  PRESSURE REGULATOR   WARNING!  Since service pressure may fluctuate with local  Before carrying out this operation, disconnect  demand, every gas cooking appliance must be  the appliance from gas and electricity.  equipped with a pressure regulator on the  Gas conversion shall be conducted by a factory ‐ incoming service line for safe and efficient  trained professional.  operation.  Call the customer service hotline to identify a  The pressure regulator shipped with the  fact
                    
                    Summary of the content on the page No. 20 
                    
                        Consult the table on page 20 for matching nozzles  to burners.                 STEP 2: SURFACE BURNERS    To replace the nozzles of the surface burners, lift    up the burners and unscrew the nozzles shipped  with the range using a 7 mm {socket wrench).   Replace nozzles using the conversion set supplied  with the range or by a Bertazzoni authorized  parts warehouse. Each nozzle has a number  indicating its flow diameter printed on the body.    STEP 3: MINIMUM FLAME ADJUSTMENT    WARNING!  These