Summary of the content on the page No. 1
OWNER'S MANUAL
34CM CORDLESS REMOTE COLOUR TELEVISION
MODEL: 3430GM
Type Tested
Electrical
Safety
AS/NZS 3250 Lic 4163
Standards Australia
APP No: N15957
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Summary of the content on the page No. 2
Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference. Screen displays and illustrations in this manual may differ from the actual ones for better visibility.
Summary of the content on the page No. 3
Contents Features ........................................................................................................................ 1 Important Safety Cautions .......................................................................................... 2 Identification of Controls ............................................................................................ 4 Front view ...........................................................................................................
Summary of the content on the page No. 4
Features Features 2 Intellectualized I C-bus control Digital AFT Technology Four Picture Modes Two groups of Video/Audio input terminals One group of DVD input terminals English/Chinese on-screen display Full function remote control Hyperband Channel exchange On timer/Off timer Game Calendar 1
Summary of the content on the page No. 5
Important Safety Precautions Safety Precautions When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. Do not expose the TV set to rain or excessive moisture. Avoid using the set in very warm or damp places and never use it in a bathroom. When cleaning dust off the picture tube disconnect the power first. You can wipe lightly with a piece of dry, clean and soft cloth. Avoid exposing
Summary of the content on the page No. 6
This TV set can operate on a power of ~240V, 50Hz. You must not use a power supply of any other type. Do not cover the ventilating hole in the cabinet Keep a space of more than 10cm from the walls to the TV set to ensure adequate ventilation. If the power cord or the plug is damaged contact a qualified service department for service. When the TV set is to be left unattended for a long period of time, turn off the power supply and remove the plug from the wall outlet. Don't try to push anything i
Summary of the content on the page No. 7
Identification of Controls Front view/Back view Front view (2) R AUDIO L VIDEO Power Button Indicator Remote Sensor 1 AV/TV MENU VOL- VOL+ CH- CH+ 5 2 3 4 6 7 1. :Earphone Jack AV input terminals (VIDEO, AUDIO: L/MONO, R) 2. AV/TV button: video input select. 3. MENU button: to enter into menu operation. 4. VOL- button: volume down adjust; menu item adjust. 5. VOL+ button: volume up adjust; menu item adjust. 6. CH- button: channel down select; menu item select. 7. CH+ button: channel u
Summary of the content on the page No. 8
Back view (1) DVD VIDEO Y 1 L/MONO S-VIDEO L/MONO CB AUDIO AUDIO 2 R C R R 4 3 1. Antenna input 2. DVD input (Y, C , C , AUDIO: L/MONO, R) B R 3. AV input (VIDEO, AUDIO: L/MONO, R) 4. S-VIDEO input Notes: The S-VIDEO terminal is prior to the VIDEO terminal, if you want to watch a video program from the VIDEO input terminal, please disconnect the S-VIDEO first. 5
Summary of the content on the page No. 9
Identification of Controls (continued) Remote Control Power on/standby Sound Mute 1 2 3 4 5 6 Direct Channel selector Picture mode select 7 8 9 DSP On-screen display call AV 0 Previous channel TV/VIDEO Input selector Channel up Volume down Volume up To access MENU operation Channel down Scanning program Playing game SCAN SLP CAL GAME Sleep timer Calendar 6
Summary of the content on the page No. 10
30 Battery Installation Effective range of the Remote Control 1 Open the battery cover. 2 Install two "AA" batteries matching the +/- polarities 5m of the battery to the +/- marks. 3 Replace the battery cover. NOTES: 1. There should be no obstacle between the TV and the transmitter. 2. Use the remote control within the effective range Notes: as the above figure. 3. If the remote control does not work, please check 1. When the remote control will not be used for a whether the batter
Summary of the content on the page No. 11
Installation Antenna installation/Connect to video and audio equipment Antenna installation Optimum reception of colour requires a good signal and will generally mean that an outdoor antenna must be used. The exact type and position of the antenna will depend upon your particular area. Notes: Turn off the power first, when you connect an outdoor antenna to the antenna input terminal. When installing an outside antenna system, extreme care should be taken to keep from touching power lines or cir
Summary of the content on the page No. 12
Connecting video and audio equipment This TV set provides 2 groups of AV input terminals and 1 group of DVD terminal for your convenient connection to VCR, DVD or other video equipment to enjoy the high quality picture. Please refer to the owner's manual of the equipment to be connected as well. Connect to the side AV input terminals R VIDEO EQUIPMENT AUDIO L/MONO To audio outputs To video output R W Y VIDEO Signal To earphone jack Connect the rear AV and DVD input terminals. DVD To audio Video
Summary of the content on the page No. 13
In menu operation, press CH+/- to select item, press Operations VOL+/- to adjust selected item. Press MENU button again or wait for several seconds to exit menu. Menu Introduction Press MENU button To adjust the picture's contrast. To adjust the picture's brightness. CONTRAST 50 P To adjust the picture's colour. I BRIGHT 50 C T COLOR 50 To adjust the picture's sharpness. U R SHARPNESS 50 E To adjust the picture's skin colour. TINT 50 (This item is available only in NTSC) Press VOL+ button Press
Summary of the content on the page No. 14
Operations Power On/Power Off Power On/Power Off Turning On 1 Press the POWER SWITCH on the TV set. 2 If no picture appears and the red indicator lights up, the TV set is in STANDBY mode. Press button on the remote control, then the TV set is turned on. 1 2 3 3 When the TV set is in STANDBY mode, you can also press the CH+/- buttons on the TV set to turn on the TV. 4 5 6 P.M 7 8 9 DSP AV 0 Note: If there is no input signal to the TV when the TV is on, blue background will appear on the scre
Summary of the content on the page No. 15
Operations Selecting Input Signal Selecting Input Signal 1 Press AV button repeatedly. The screen displays input signal source AV1/AV2/YUV/TV. Select the input signal source you need. 1 2 3 Digit 4 5 6 P.M In AV mode, you can press the digit buttons to switch 2 7 8 9 DSP back to TV mode. DSP AV 0 AV 3 Press DSP button. The screen displays current state. Press again to cancel. SCAN SLP CAL GAME 12
Summary of the content on the page No. 16
1 Press MENU button. Operations 2 Press VOL+/- buttons to select PRESET menu. Tuning In 3 Press CH- button to access PRESET menu. Auto search/Manual search Auto search Access PRESET menu. Press CH+/- buttons to select AUTO. P COLORSYS AUTO R SOUNDSYS BG Press VOL+/- buttons and the TV set starts E S AUTO E Auto channel preset. All active channels will be T FINE MANUAL preset and stored into the memory automatically. After presetting, the TV will display the first channel. 1 2 3 During the proces
Summary of the content on the page No. 17
Operations Tuning In (continued) Channel skipping/Fine tuning After presetting the channels, you can skip unnecessary position numbers so that only the channels you want are selected. Channel skipping BAND UHF P Please select a channel number with R CHANNEL 0 E EXCHANGE S Digit buttons or CH+/- buttons. You can also E TARGET 1 T access PRESET menu, select CHANNEL SKIP ON item and select a channel number with 1 2 3 VOL+/- buttons. Digit 4 5 6 P.M 7 8 9 DSP AV 0 In PRESET menu, please select SKIP
Summary of the content on the page No. 18
Channel exchange/Setting colour system/Setting sound system After channel presetting, you can edit the order of the programs by using the channel exchange function. Channel exchange Access PRESET menu and select TARGET item. CHANNEL 0 P Press VOL+/- buttons to select a target R EXCHANGE E 1 2 3 TARGET 1 S channel number that you would like to E SKIP ON T Digit exchange with the current channel. Then AFT ON 4 5 6 P.M select EXCHANGE item and press VOL+/- 7 8 9 DSP buttons to confirm. AV 0 Now the
Summary of the content on the page No. 19
Operations Selection Channel Use 0-9 buttons and --/--- buttons/Use CH+/- Buttons/Use the PREVIOUS button Use Digit buttons 1 To select one-digit channel Press --/--- button to Press 0-9 direct 8 display "-". channel selector. 1 2 3 4 5 6 P.M Digit To select two-digit channel 7 8 9 DSP -- -1 AV 0 Press --/--- button 18 Press 0-9 Press 1-9 repeatedly to buttons. buttons. display "--". CH+ CH- To select three-digit channel SCAN SLP CAL GAME Press --/--- button --- -- 1 -16 168 repeatedly to displ
Summary of the content on the page No. 20
Operations Picture Controls Contrast/Brightness/Colour/Sharpness/Tint To adjust the picture's contrast. Press CH+/- buttons To adjust the picture's brightness. to select item CONTRAST 50 P CONTRAST 50 upwards or downwards P I BRIGHT 50 To adjust the picture's colour. I BRIGHT 50 C C T COLOR 50 T COLOR 50 Press VOL+/- U U R SHARPNESS 50 R SHARPNESS 50 To adjust the picture's sharpness. E buttons to adjust E TINT 50 TINT 50 selected item. To adjust the picture's skin colour. (This item is availabl
