Furuno BACK GP-80 user manual

User manual for the device Furuno BACK GP-80

Device: Furuno BACK GP-80
Category: GPS Receiver
Manufacturer: Furuno
Size: 0.91 MB
Added : 8/6/2014
Number of pages: 101
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Furuno BACK GP-80. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Furuno BACK GP-80.

For your convenience

If looking through the Furuno BACK GP-80 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Furuno BACK GP-80 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Furuno BACK GP-80 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Furuno BACK GP-80 User manual - Online PDF
Advertisement
« Page 1 of 101 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Furuno BACK GP-80 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Furuno BACK GP-80. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Summary of the content on the page No. 2

Your Local Agent/Dealer Your Local Agent/Dealer 9-52 Ashihara-cho, 9-52 Ashihara-cho, Nishinomi Nishinomiy ya, Ja a, Jap pan an Tele Telep phone : hone : 0798-65-2111 0798-65-2111 Telefax : Telefax : 0798-65-4200 0798-65-4200 FIRST EDITION : FIRST EDITION : SEP. SEP. 1995 1995 A All ri ll rig ghts reserved. hts reserved. Printed in Japan Printed in Japan U : U : JUN. JUN. 03,2002 03,2002 PUB.No. PUB.No. OME-43740 OME-43740 *00080733901* *00080733901* *00080733901* *00080733901*

Summary of the content on the page No. 3

SAFETY INSTRUCTIONS "DANGER", "WARNING" and "CAUTION" notices appear throughout this manual. It is the responsibility of the operator and installer of the equipment to read, understand and follow these notices. If you have any questions regarding these safety instructions, please con- tact a FURUNO agent or dealer. This notice indicates a potentially hazardous situation which, if not avoided, will result in death or DANGER serious injury. This notice indicates a potentially hazardous situation w

Summary of the content on the page No. 4

SAFETY INFORMATION FOR THE OPERATOR CAUTION WARNING Do not place liquid-filled containers on Do not open the cover of the the top of the equipment. equipment. Fire or electrical shock can result if a This equipment uses high liquid spills into the equipmtnt. voltage electricity which can shock, burn or cause death. Do not place heater neat the equipment. Only qualified person- nel should work inside the Heat can melt the power cord, which can equipment. result in fire or electrical shock. Do

Summary of the content on the page No. 5

4. NAVIGATION PLANNING TABLE OF 4.1 Registering Waypoints ...................... 4-1 CONTENTS 4.2 Editing Waypoints............................. 4-4 4.3 Deleting Waypoints........................... 4-5 4.4 Registering Routes............................ 4-5 4.5 Deleting Route Waypoints ................ 4-6 FOREWORD ............................iii 4.6 Replacing Route Waypoints.............. 4-7 4.7 Deleting Routes ................................ 4-7 SYSTEM OVERVIEW ...............1 5. STARTING F

Summary of the content on the page No. 6

8.5 Receiving Data from Personal Computer .......................................... 8-8 8.6 DGPS Settings ................................ 8-10 8.7 Displaying GPS Monitor Displays . 8-12 9. MAINTENANCE & TROUBLESHOOTING 9.1 Clearing the Memory ........................ 9-1 9.2 Preventative Maintenance................. 9-2 9.3 Error Messages ................................. 9-2 9.4 Troubleshooting ................................ 9-4 9.5 Self Tests .........................................

Summary of the content on the page No. 7

• Man overboard feature records latitude and FOREWORD longitude coordinates at time of man over- board and provides continuous updates of range and bearing to that point • DGPS capability—with built-in DGPS A Word to GP-80 Owners beacon kit, or accepts DGPS correction data from external DGPS beacon receiver Congratulations on your choice of the • Menu-driven operation FURUNO GP-80 GPS Navigator. We are con- • Bright 122 x 92 mm LCD with tempera- fident you will see why the FURUNO name ture compe

Summary of the content on the page No. 8

This page is intentionally left blank.

Summary of the content on the page No. 9

SYSTEM OVERVIEW 1. Menu Tree Display selection menu DISPLAY Select Display (Plotter 1, Plotter 2, Highway, Navigation and Data displays) SEL Main menu MENU 1. DISPLAY SETUP ESC 2. TRACK/MARK SETUP 3. ERASE TRACK/MARK 4. ALARM SETTINGS 1/2 ALARM SETTINGS 2/2 5. MANUAL CALCULATION 6. 7. GPS MONITOR SATELLITE MONITOR BEACON RCVR MONITOR STATION MESSAGE 8. SELF TESTS 1. MEMORY, I/O PORT TEST 2. KEYBOARD TEST 3. TEST PATTERN

Summary of the content on the page No. 10

Waypoint, route menu WPT 1. Cursor RTE 2. MOB/Event Position 3. Own Ship Position 4. Waypoint List WAYPOINT LIST 5. Route Planning ROUTE LIST GOTO menu GOTO 1. Cursor 2. MOB/Event Position 3. Waypoint List GOTO "Waypoint List" 4. Route List GOTO "Route List" 5. Cancel 2

Summary of the content on the page No. 11

2. System Configuration ANTENNA UNIT Receives GPS signals. BEACON ANTENNA UNIT Receives GPS correction data from DGPS reference station. DISPLAY UNIT Receives and processes GPS signals to fix position and display it in latitude/longitude or LOP. Ship's Mains 10.2 to 31.2 VDC 3

Summary of the content on the page No. 12

3. Operation Flow Chart Select display mode • Plotter 1 (own ship's track and data) • Plotter 2 (own ship's track) • Highway (ship's track overlaid on navigation lane) • Navigation (graphic navigation data display for steering) • Data (alphanumeric navigation data) Set destination temporarily Register waypoints • By latitude and longitude • By LOP Register routes Set destination Display steering data Set alarms Perform other operations as required. (Position correction, geodetic chart to use

Summary of the content on the page No. 13

1. OPERATIONAL OVERVIEW 1.1 Control Description Cursor keys Shift display and cursor. MENU NU/CU Opens/closes menu; Selects display orientation; ESC ENT quits current operation. registers selections on menus. EVENT DISPLAY Inscribes event mark at Selects display mode. 6 1 MOB SEL ship's position; marks man overboard position WPT GOTO Registers waypoints Sets destination. 2 RTE 7 and routes. PLOT MARK Inscribes mark on Turns recording and plotting 3 ON/OFF 8 the display. of ship's track on/off. Z

Summary of the content on the page No. 14

When turning on the power the following oc- 1.2 Turning On and Off the curs: Power 20 seconds after turning on the power, accu- The GP-80 takes about two minutes to find rate position (in latitude and longitude) ap- position when turned on for the very first time. pears on the display. Thereafter it takes about 20 seconds to find If position could not be found, "NO FIX" ap- position each time the power is turned on. pears at the GPS receiver condition window. When PDOP value exceeds 6 in the 3D

Summary of the content on the page No. 15

Note 1: When PDOP value exceeds 6 in the 1.4 Selecting the Display 3D mode, the position fixing method is automatically changed to 2D. Mode Note 2: The "DEMO" icon appears when the 1) Press the [DISPLAY SEL] key. The dis- display is in the demonstration mode. To return play shown in Figure 1-4 appears. to normal mode, turn off the power and turn it on while pressing and holding down the [NU/ CU ENT] key. Select Display Note 3: Refer to page 10-2 about HDOP and Plotter 1 Plotter 1 PDOP. Plotter 2

Summary of the content on the page No. 16

Plotter 1 display Plotter 2 display Bearing from own ship Cursor position or lighthouse to destination waypoint data, when cursor is on Ship's position appears when cursor is off Course GPS receiving Own ship's bar condition track Own ship Alarm 34° 23.456´ N 135° 45.678´ E DGPS 3D mark range 30 [01] 34° 23.456´ N 135° 45.678´ E DGPS 3D 30 BRG 40 50 [01] 44° H CSE 40 32° 50 20 H BRG TO + WGS84 2.00 nm 123° RNG TO + 20 Figure 1-6 Plotter 2 display WGS84 nm 11.5 2.00 nm Highway display Horizont

Summary of the content on the page No. 17

2) With autopilot connection, automatic Navigation display mode 1) No autopilot connection Cross track Bearing from own DGPS 3D TO; 012 error meter ship to destination SPD E waypoint Bearing kt Destination Speed 12.3 scale Velocity To waypoint no. N Destination VTD BRG: 10.3 kt 63° DGPS 3D CSE: TO; 012 S RNG E SPD 123° 0.1nm 0.1nm 123 nm 12.3 kt N VTD TRIP Auto Pilot Hdg Str BRG 789 10.3 nm kt Auto 123° P 23° 63° CSE S RNG 123° 0.1nm 0.1nm 123 Auto mode nm Heading Rudder angle Rudder

Summary of the content on the page No. 18

Data display (Window assignment and size of characters are user-definable) Position in latitude and longitude or LOPs Fixing date and time* Cursor SEP 12, 1995 23:59'59" U DGPS 3D POSITION 12° 23.456' N 123° 23.456' E WGS84 TO : 001 RNG BRG MARINE 223.4° nm 31.23 POINT1 NEXT : 002 SPD CSE MARINE 12.3 kt 123.4° POINT2 User-defined User-defined Current destination waypoint display data #1 display data #4 Next destination waypoint User-defined User-defined display data #3 display data #2 User-def

Summary of the content on the page No. 19

2.3 Shifting the Cursor 2. TRACK The cursor can be shifted with the cursor keys. 1) Press the [CURSOR ON/OFF] key to turn 2.1 Enlarging/Shrinking the on the cursor. Display 2) Press the cursor keys. You may enlarge and shrink the display on The cursor moves in the direction of the cur- the Plotter 1 and Plotter 2 displays, with the sor key pressed. When the cursor reaches the [ZOOM IN] and [ZOOM OUT] keys. The edge of the display, the display shifts in the horizontal range is available among 0.2

Summary of the content on the page No. 20

Cursor turned off 2.5 Centering Cursor Position Ship's position (in latitude and longitude or LOPs), speed and course appear on the dis- 1) Press the [CURSOR ON/OFF] key to turn play. on the cursor. Own ship 2) Press the cursor keys to position the cur- Own ship position mark in latitude and longitude sor. 3) Press the [CENTER] key. 34° 23.456´ N 135° 45.678´ E DGPS 3D BRG 2.6 Centering Own Ship's 234° Position CSE 345° 1) Press the [CURSOR ON/OFF] key to turn off the cursor. RNG 123 nm 2) Press


Alternative user manuals
# User manual Category Download
1 Furuno AutoPilot FAP50 User manual GPS Receiver 27
2 Furuno CH-300 User manual GPS Receiver 31
3 Furuno 1650WF User manual GPS Receiver 66
4 Furuno Auto Plotter ARP15 User manual GPS Receiver 4
5 Furuno CI-35H User manual GPS Receiver 2
6 Furuno CI-35 User manual GPS Receiver 8
7 Furuno Auto Pilot FAP300 User manual GPS Receiver 17
8 Furuno DD-80 User manual GPS Receiver 4
9 Furuno DUAL GPS GP-150-DUAL User manual GPS Receiver 106
10 Furuno FCV-30 User manual GPS Receiver 39
11 Furuno GP-7000F User manual GPS Receiver 69
12 Furuno GD-1700 User manual GPS Receiver 7
13 Furuno GD-1700C User manual GPS Receiver 12
14 Furuno GP-1650 User manual GPS Receiver 294
15 Furuno GP-1650D User manual GPS Receiver 39
16 Sony NAV-U NV-U74T User manual GPS Receiver 3
17 Sony NV-U71T User manual GPS Receiver 11
18 Sony NAV-U NV-U44 User manual GPS Receiver 13
19 Sony NV-U50 User manual GPS Receiver 12
20 Sony NAV-U NV-U72T User manual GPS Receiver 4