Summary of the content on the page No. 1
Owner’s manual
Mode d’emploi
Manual de instrucciones
DXZ655MP
CD/MP3/WMA Receiver / CeNET Control
•
Récepteur CD/MP3/WMA / Commande CeNET
•
Reproductor de discos CD/MP3/WMA con
receptor y control CeNET
Clarion Co., Ltd.
PE-2726B
All Rights Reserved. Copyright © 2004: Clarion Co., Ltd.
2004/12 Printed in China / Imprimé en Chine / Impreso en China 280-8146-00
Summary of the content on the page No. 2
Español English Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. 11. ESPECIFICACIONES ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. Sintonizador de FM Audio ∗ This manual includes the operating procedures of the CD changer, SIRIUS and TV tuner Gama de frecuencias: Salida máxima de
Summary of the content on the page No. 3
English English English Display Items Motorized Face 2. PRECAUTIONS This unit uses motorized face to make large-screen displays possible. Source indication 1. When the inside of the car is very cold and the 2. Driving on extremely bumpy roads which When you use the motorized face, be sure to close it. FM1-3, AM1 : Radio mode player is used soon after switching on the cause severe vibration may cause the sound • Radio mode : Preset No. / frequency 3. If you move the MOTORIZED FACE by hand, SR1-3
Summary of the content on the page No. 4
English English English Français Español Major button operations when external equipment is 3.CONTROLS / LES COMMANDES / CONTROLES 4. NOMENCLATURE connected to this unit [ADJ] button Note: ●When the CD/DVD changer is Source unit / Appareil pilote / Unidad fuente • Press and hold the button for 1 second or • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). connected longer to switch the TV picture mode or VTR ∗ For details, see the section
Summary of the content on the page No. 5
English English English Français Español Major button operations when external equipment is 3.CONTROLS / LES COMMANDES / CONTROLES 4. NOMENCLATURE connected to this unit [ADJ] button Note: ●When the CD/DVD changer is Source unit / Appareil pilote / Unidad fuente • Press and hold the button for 1 second or • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). connected longer to switch the TV picture mode or VTR ∗ For details, see the section
Summary of the content on the page No. 6
English English English Display Items Motorized Face 2. PRECAUTIONS This unit uses motorized face to make large-screen displays possible. Source indication 1. When the inside of the car is very cold and the 2. Driving on extremely bumpy roads which When you use the motorized face, be sure to close it. FM1-3, AM1 : Radio mode player is used soon after switching on the cause severe vibration may cause the sound • Radio mode : Preset No. / frequency 3. If you move the MOTORIZED FACE by hand, SR1-3
Summary of the content on the page No. 7
English 5. DCP The control panel can be detached to prevent Attaching the DCP theft. When detaching the control panel, store it 1. Insert the DCP so that the A section on the in the DCP (DETACHABLE CONTROL PANEL) right side of the DCP catches on the hook B case to prevent scratches. on the unit. We recommend taking the DCP with you when leaving the car. Removing the DCP 1. With the MOTORIZED FACE closed, turn off the power. 2. Press the [RELEASE] button deeply to open the DCP. [RELEASE] button 2
Summary of the content on the page No. 8
English 5 2 0 2 6. REMOTE CONTROL Signal transmitter [ ] SRC [ ] BND [ ] [ ], [ ] [ ], [ ] a d [ ] MUTE [ ] DISP [ ] ISR [RDM] [ ] RPT [ ] SCN Inserting the Battery 1 Turn over the remote control unit and slide the cover in the direction indicated by the arrow in the illustration. 2 Insert the battery (CR2025) into the insertion guides, with the printed side (+) facing upwards. 3 Press the battery in the direction indicated by the arrow so that it slides into the compartment. 4 Re
Summary of the content on the page No. 9
English Functions of Remote Control Unit Buttons Mode CD changer Radio/SIRIUS CD/MP3/WMA TV DVD changer Button Switches among radio, SIRIUS tuner, CD/MP3/WMA, CD changer, DVD changer, TV and [SRC] AUX. Plays the first track. Moves the next disc Switches reception Switches reception [BND] Top play. in increasing order. band. band. Increases and decreases volume (in all modes). [ ] , [ ] Moves preset Moves tracks up and down. Moves preset [ ] , [ ] channels up and When pres
Summary of the content on the page No. 10
English 7. OPERATIONS Note:Be sure to read this chapter referring to the front diagrams of Basic Operations chapter “3. CONTROLS” on page 5 (unfold). Adjusting the volume CAUTION 1. Press the front part of the [ROTARY] knob. Be sure to lower the volume before The knob will pop up. switching off the unit power or the ignition 2. Turning the [ROTARY] knob clockwise key. The unit remembers its last volume increases the volume; turning it setting. If you switch the power off with the counterclockwis
Summary of the content on the page No. 11
English Basic Operations Setting the Z-Enhancer Plus Adjusting the tone This unit are provided with 4 types of sound Press the [A-M] button and select the item to tone effects stored in memory. Select the one adjust. Each time you press the [A-M] button, you prefer. the item changes as following order: ∗ The factory default setting is “Z+ OFF”. ●When “Z+ BASS BOOST” is set Each time you press the [Z+] button, the tone “SUB-WOOF VOL 0” ➜ “BASS BOOST 0" effect changes in the following order: ➜ “BA
Summary of the content on the page No. 12
English Basic Operations Adjusting the bass Adjusting the balance The bass gain, bass FREQ (center frequency) 1. Press the [A-M] button and select and bass Q can be adjusted as follows. “BALANCE 0”. 1. Press the [A-M] button and select “ BASS 2. Turning the [ROTARY] knob clockwise GAIN 0”. emphasizes the sound from the right speaker; turning it counterclockwise 2. Press the [a, d] lever upward or emphasizes the sound from the left speaker. downward and select from ∗ The factory default setting i
Summary of the content on the page No. 13
English Radio Operations Listening to the radio Recalling a preset station 1. Press the [SRC] button and select the radio A total of 24 preset positions (6-FM1, 6-FM2, 6- mode. The frequency appears in the display. FM3, 6-AM) exists to store individual radio stations in memory. Pressing the corresponding 2. Press the [BND] button and select the radio [DIRECT] button recalls the stored radio band. Each time the button is pressed, the frequency automatically. radio reception band changes in the fo
Summary of the content on the page No. 14
English Radio Operations CD/MP3/WMA Operations Instant station recall (ISR) MP3/WMA Instant station recall is a special radio preset What is MP3? that instantly accesses a favorite radio station at MP3 is an audio compression method and a touch of a button. The ISR function even classified into audio layer 3 of MPEG standards. operates with the unit in other modes. This audio compression method has penetrated ●ISR memory into PC users and become a standard format. 1. Select the station that you
Summary of the content on the page No. 15
English CD/MP3/WMA Operations 2. Files without MP3/WMA data will not play. Setting Set to CD Set to MP3/WMA Disc The indication “––:––” appears in the play time display if you attempt to play files Mixed with CD and Play CD Play MP3/WMA without MP3/WMA data. MP3/WMA type tracks ● Logical format (File system) CD type track only Play CD Play CD 1. When writing MP3/WMA file on a CD-R disc MP3/WMA type track only Play MP3/WMA Play MP3/WMA or CD-RW disc, please select “ISO9660 level 2. After making t
Summary of the content on the page No. 16
English CD/MP3/WMA Operations Notes: Loading 8 cm compact discs • Be sure to close the MOTORIZED FACE after ∗ No adapter is required to play an 8 cm CD. removing the CD. ∗ Insert the 8 cm CD into the center of the CD SLOT. • The MOTORIZED FACE closes automatically 30 3. After loading a CD, the MOTORIZED FACE seconds after removing the CD. closes automatically. • If a CD (12 cm) is left in the ejected position for 15 seconds, the CD is automatically reloaded. (Auto Notes: reload) • Note that MOTO
Summary of the content on the page No. 17
English CD/MP3/WMA Operations 2. To select a track, press the [a, d] lever Selecting a track upward or downward. ●Track-up 1. Press the [a, d] lever upward to move to the beginning of the next track. Top function 2. Each time the [a, d] lever is pressed The top function resets the CD player to the first upward, playback proceeds to another track track of the disc. Press the [BND] button to play in the advancing direction. the first track (track No. 1) on the disc. ∗ In case of MP3/WMA, the first
Summary of the content on the page No. 18
English CD/MP3/WMA Operations Operations Common to Each Mode 1. Press and hold the [RDM] button for 1 second or longer to perform folder random To change display setting play. “ RDM” appears in the display. 1. Press and hold the [D] button for 1 second or longer to switch to the adjustment selection ● To cancel play display. 1. Press the operating button previously selected. 2. Press the [a, d] lever upward or downward to select the “item name”. “CLOCK” ↔ “SPE/ANA PTN” ↔ “S/A Play list mode SENS
Summary of the content on the page No. 19
English Operations Common to Each Mode Each time you turn the [ROTARY] knob, ● Entering MESSAGE INFORMATION the setting changes in the following order: Message up to 30 characters long can be stored in memory and displayed as a type of screen “ SPE/ANA PTN 1” ➜ “ SPE/ANA PTN saver setting. 2” ➜ “ SPE/ANA PTN 3” ➜ “ SPE/ ANA PTN 4” ∗ The factory default setting is “Welcome to Clarion”. ● Setting the sensitivity of the spectrum 2-1. Select “ MSG INPUT ”. analyzer 3-1. Press the [ ] button. This fu
Summary of the content on the page No. 20
English Operations Common to Each Mode ∗ This setting item can be adjusted within the 3-1. Turn the [ROTARY] knob to select “ON” or range SPEED 1 to SPEED 6. “OFF”. Adjust this setting item while viewing how the ● Setting the Subwoofer appearance of the display changes. You can set the subwoofer on or off. ● Dimmer level ∗ The factory default setting is “ON”. You can adjust the reduced illumination level of 2-1. Select “ SUB-W”. the dimmer. 3-1. Turn the [ROTARY] knob to select “ON” or ∗ The fac
