Summary of the content on the page No. 1
MMD92
9.2" OVERHEAD LCD
VIDEO MONITOR
WITH DVD PLAYER
Owner’s Manual
1287962 user manual 6-12-07.P65 1 6/15/2007, 1:27 PM
Summary of the content on the page No. 2
Important Notice An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when the vehicle’s parking brake is applied. An LCD p
Summary of the content on the page No. 3
Congratulations on your purchase of the Movies 2 Go MMD92 drop-down Video Monitor with DVD Player. The MMD92 has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product and to ensure that you obtain the best results from your equipment. NOTE: Installation options vary, see the individual installation/owner’s manuals for each component in your system to obtain a full und
Summary of the content on the page No. 4
CONTROLS AND INDICATORS DIAGRAM 1 23 1 456 78 910111213 14 15 17 16 4 MMD92 1287962 user manual 6-12-07.P65 4 6/15/2007, 1:27 PM
Summary of the content on the page No. 5
MAIN FUNCTION DESCRIPTIONS 1. Dome Lights – Provide additional interior illumination. 2. Power ON/OFF Button ( ) – Turn the MMD92 ON and OFF. 3. Menu Button – Source select DVD, AV1 and AV2. 4. A/V Source Button – Source select DVD, AV1 and AV2. 5. (-) Button – Used to move down for Menu navigation. 6. (+) Button – Used to move upwn for Menu navigation. 7. Dome Light Switch – Move to the ON/OFF position, then press to turn the dome light on or off. 8. Screen Release – Press to lower the LCD
Summary of the content on the page No. 6
Remote Control Operation 6. Remove the battery if the remote is not going to be used for a long time or during storage. The remote control will only operate the MMD92. It is not a universal remote control and will not control equipment from other manufacturers. Initial Use* *When purchased the remote control has a battery installed with a plastic insert to prevent battery discharge. Remove the plastic insert before attempting to use the remote. Battery Replacement 1. Remove the battery hold
Summary of the content on the page No. 7
Operation with Remote Control 1. POWER - Press this button to turn the MMD92 “ON” or “OFF” . 2. SETUP - Press to access the setup menu to modify the DVD player settings. 3. MUTE - Press to turn sound on or off. 4. Eject ( ) Button - This button is used to eject the disc. 5. 0-9 - Press to enter numbers directly such as settings or track numbers. 6. Previous Button ( ) - This button is used to go to the previous chapter on DVD or track on CD. 7. Play or Pause Button ( II ) - This button is us
Summary of the content on the page No. 8
Operation with Remote Control (Cont) 16. Zoom - Press to set the zoom for movie viewing. 17. Repeat - Press to repeat the track or the entire disc. 18. Title - Press to view the DVD disc’s title menu. 19. Fast Forward ( FF ) Button - Press to fast forward playback at 2x, 4x, 8x, 16x and 32x speeds. 20. Subtitle - Press to select and turn on subtitles during playback. 21. Menu - Press to view the DVD disc’s main minu; Press and hokd it to display the system menu. 22. NEXT ( ) Button - Press to
Summary of the content on the page No. 9
Using your DVD player Adjusting the DVD player To open the DVD player 1. Press Open Button to unlock the LCD panel. OPEN BUTTON 2. Swing the DVD player downward to the desired viewing angle. Caution The LCD display opens to a maximum angle of 150° degrees. Do not attempt to open it further. 150° To close the DVD player Swing the LCD panel upward until you hear the lock click. Make sure that cords and other items do not get caught in the panel when Caution you close it. For your safety, be su
Summary of the content on the page No. 10
Basic operation Turning on the player Press the [ ] button on the remote control or on the front panel. The player turns on and the input source and format are displayed on the screen: DVD-IN Input source name The system of the input source NTSC detected automatically Notes: 1. The default is DVD-IN. 2. If the message "NO DISC" is displayed on the screen, insert Disc Media or press A/V button to change input source. Selecting the input source 1. After Power ON, press A/V button to switch from on
Summary of the content on the page No. 11
Playing a disc 1. If the input source isn't already set to DVD-IN, press A/V button to change the input source to DVD-IN 2. Insert a disc to DVD into the disc slot on the right of the player. After several seconds, the screen displays the message "loading". 3. When the DVD menu appears, press Play/Pause button or ENTER button. To stop playback, press STOP button. To play the previous track or chapter, press Previous button. To play the next track or chapter, press Next button. To pause or resume
Summary of the content on the page No. 12
Changing the audio language during Playback (Multi Audio) 1. Press AUDIO button to change audio track during DVD playback. The current audio language number, the total number of available audio channels (languages) and current language are displayed. 2. If there are multiple languages are available, press AUDIO button again to cycle through the available languages. The audio display disappears automatically if AUDIO button is not pressed again within 3 seconds. Note: Some DVDs only allow access
Summary of the content on the page No. 13
Changing Viewing Angle during Playback (Multi-Angle) To change viewing angle: 1. Press ANGLE button to cycle through available viewing Angles during DVD playback. The current angle number and the total number of angles available appear on the screen. 2. Press ANGLE button again to select a different angle, then press it again to exit and return to the normal viewing angle. The Angle display disappears automatically if ANGLE button is not pressed again within 3 seconds. Note: Viewing angles are
Summary of the content on the page No. 14
Playing MP3 CDs MP3 is a format for storing digital audio. An audio track is compressed into the MP3 format with little loss of audio quality, while taking up much less disc space. This player can play CD-R/RW discs that contain music MP3 files. When a MP3 disc is inserted into the player, the menu screen appears automatically. You can use the menu screen to select the folders and tracks you want, or the player plays the tracks in the order they were burned onto the disc. To select the folders a
Summary of the content on the page No. 15
4. Press the button to move to the next file or press the button to move to the previous file. 5. Press the < button to go to the previous folder or to page up, or press the > button to page down. To repeat a file or folder of an MP3 disc: During MP3 playback, press the REPEAT button to cycle through the available settings: Repeat single---Repeats the current file. Repeat all---Repeats the contents of current folder. Repeat off---Turns off repeat and resumes normal playback. Note: This icon
Summary of the content on the page No. 16
Note: In Wide mode, normal images are stretched horizontally and are displayed over the entire screen. In Normal mode, normal images are not stretched, and displayed without distortion. LAC Enable: Low angle compensation, if it is on, the picture looks very smooth RESET: Reset menu to default value Using the OSD menu. Press SETUP on the remote control, the OSD menu opens. Using the OSD menu Press SETUP on the remote control; the OSD menu opens. Menu Description General setup page TV DISPLAY:
Summary of the content on the page No. 17
Menu Description Speaker setup page DOWNMIX: Applies to Dolby digital sound. You can select from following: ·LT/RT ·STEREO DUAL MONO: Selects the different channels of sound. You can select from following: ·STEREO ·L-MONO ·R-MONO ·MIX-MONO DYNAMIC: Selects the different rating level of dB. You can select from following: ·Off ·2/8 ·4/8 ·6/8 ·FULL Preference page TV TYPE: Selects the TV system .You can select from following: ·AUTO ·PAL (Europe and Asia) ·NTSC (United States) AUDIO: Selects the a
Summary of the content on the page No. 18
Customizing DVD settings To set the general setup page: 1. Press SETUP button on the remote control. The DVD setup menu opens. 2. Press < or > to select General setup page, then the list opens. 3. Press the ∧∧∧ or ∨∨∨ to select the desired setting item. The items include TV DISPLAY, ∧∧ ∨∨ ANGLE MARK, OSD LANG, CAPTIONS and SCREEN SAVER. 4. Press ENTER to open the list, then press ∧∧∧∧∧ or ∨∨∨∨∨ to choose the setting values. 5. Press ENTER to confirm. 6. Press SETUP to exit the setup menu. To set
Summary of the content on the page No. 19
Problem Cause Solution Player does not play Disc inserted incorrectly Reinsert the disc with the label disc side up (facing the ceiling). Disc format is not supported Check the disc format. Disc is dirty or scratched Clean or replace the disc. Wrong region code Must be region 1 disc . The player suddenly Player error Try turning the player off and on. stopped working or the If the player still doesn't respond, screen went black press the reset button. Player doesn't turn on The car ignition (or
Summary of the content on the page No. 20
Problem Cause Solution The picture on the 1. The equipment is located at 1.This is the characteristics of LCD screen is dark. a low temperature area. display in low temperature; it will restore to normal brightness after playing for few minutes. 2. Brightness is set too low. 2. Adjust the brightness setting. No sound can be heard 1. Headphones are not turned on. 1.Turn on the headphones. from the IR wireless headphones. 2. The battery in the headphone 2.Replace or recharge the is low. b
