Spin Master Paint Sensation user manual

Summary of the content on the page No. 1

Axle
Arm
Cover
Paint
Button
Control
Handle
Spinning
Tray
2-sided Paint
Swirl
Canisters
Button
Clear
Dome
Control
“ON/OFF”
Arm
Switch
Paint Containers
Cleaning Tool
™
• Design COOL ART and CRAFTS with Paint Sensation !
• Paint on whatever you can fit into the Spinning Tray!
Please remove everything from the packaging and compare to the contents shown on this page.
If any items are missiont, please call Spin Master’s customer care hotline: 1-800-622-8339.
Product and colours may vary.
Keep these

Summary of the content on the page No. 2

ASSEMBLY 1 B. Push down until the Arm Cover clicks into A. Raise the Paint arm to an upright position. position. Key Hole Slot Arm Cover Push Down Paint Arm 2 A. Remove lid. Fill Paint Canister 3/4 full. Note: The orange gear in the centre of the canister must face the axle. Push until you hear a click. Orange Gear Axle Paint Canister Orange Gear

Summary of the content on the page No. 3

ASSEMBLY (CONTINUED) 3 Cover the Paint Canister with the Clear Dome, Clear Dome turning it clockwise, until it locks into place. 4 Place Spinning Tray into the Bottom Paint Pull the Control Arm out and position the Tray and rotate it until it slides down and into Bottom Paint Tray into the slot in the centre of place. the control arm, as shown. You are ready to Create Your Own Paint ™ Sensations ! Bottom Paint Tray Spinning Tray Control Arm

Summary of the content on the page No. 4

Try experimenting with each of the 3 controls. Experimenting will lead you to discover how ™ ™ CREATING to make endless designs with Paint Sensation ! Paint Sensation has 3 control locations: 1 Pressing or Pulsing the Paint Button controls how fast paint comes out “ON/OFF” Switch of the Paint Canister. DESIGN TIP: You will get different designs depending on how you use the Control Arm, Paint Button and Swirl Button. Place paper or any 3D object less than 1” high into the Spinning Tray. Tur

Summary of the content on the page No. 5

™ • Remove the Arm Cover, Trays, Clear Dome and Paint Canisters from Paint Sensation . CLEANING • Rinse or soak each one with warm water and soap. • Hold the Arm Cover upside down under warm running water. • Rinse until all parts are clean. • Allow to dry. 1 Each Paint Canister has tiny holes that the paint comes out of. If these holes get blocked you can’t paint. The Cleaning Tool unblocks the Paint Holes. To use the Cleaning Tool, insert as shown. Align half-moon curve on the Paint Canister w

Summary of the content on the page No. 6

TROUBLESHOOTING Paint is not coming out when I press the • The Paint Canister does not have enough paint in it. Refill with fresh paint. Paint Button. • The Paint Canister holes are blocked. Read the section on Cleaning Tool under Cleaning Paint Canisters in these instructions. Paint is dripping onto my creations. • Paint can build up in the Arm Cover after frequent use. Remove the Arm Cover and rinse with warm soapy water. Reattach to the Paint Arm. The paint comes out too fast. • Try pulsing