Eagle Electronics CUDA 240I S user manual

User manual for the device Eagle Electronics CUDA 240I S

Device: Eagle Electronics CUDA 240I S
Category: SONAR
Manufacturer: Eagle Electronics
Size: 0.63 MB
Added : 4/17/2013
Number of pages: 8
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Eagle Electronics CUDA 240I S. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Eagle Electronics CUDA 240I S.

For your convenience

If looking through the Eagle Electronics CUDA 240I S user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Eagle Electronics CUDA 240I S on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Eagle Electronics CUDA 240I S to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Eagle Electronics CUDA 240I S User manual - Online PDF

Explore the detailed user manual for Eagle Electronics remarkable creation, Model CUDA 240I S. Gain valuable insights and instructions to maximize your device's capabilities and optimize your user experience. Uncover the full potential of your Eagle Electronics CUDA 240I S device through this comprehensive user manual, offering step-by-step guidance and expert tips for effortless operation and enjoyment.

Advertisement
« Page 1 of 8 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Eagle Electronics CUDA 240I S but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Eagle Electronics CUDA 240I S. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Pub. 988-0152-081
Addendum I
Additional Instructions for
Eagle Cuda 240i S/GPS
Your sonar/GPS unit, the Cuda 240i, functions exactly like the Cuda
240 described in the manual provided (part 988-0152-012). In addition,
the Cuda 240i contains a communications port for NMEA 0183 output.
The instructions for connecting data cables and setting up the
communications port appear in this addendum.
NMEA 0183 Data Cable Connections
NMEA is a standard communications format for marine electronic
equipment.

Summary of the content on the page No. 2

A few other radio brands (and other electronic devices) that meet the NMEA 0183 standard won't need these adapters and you will have to remove the resistor and diode to make those work. This is Wiring Diagram B, which is described on page 4. Consult your other device's owner’s manual, then read through all of the following instructions before you begin. Use the installation diagram most suited to your brand of radio or other device. If your device manual indicates an RS-232 connection (i.e., a c

Summary of the content on the page No. 3

Twist the exposed wires together as shown in the following figures. If you're using a Uniden or similar radio, connect the radio's NMEA Wire to the Cuda 240i data cable's yellow wire, and the radio's Ground/Shield wire to the Cuda 240i data cable's black shield wire. If you're using another radio brand or NMEA device, see Wiring Diagram B instructions at the end of page 3. Yellow (Transmit) NMEA Wire (Receive) or NMEA + To Uniden Com port to Shield (Ground) Ground/Shield or NMEA – radio or other

Summary of the content on the page No. 4

After taping the wire ends individually, wrap the entire connection with electrical tape as shown. This will help protect from moisture and prevent the wires from breaking contact. Wiring Diagram "B" If your VHF radio or other device requires true RS-232, you will need to remove the diode and resistor built into the end of the Cuda 240i data cable. You will notice near the end of the cable a segment protected with black heat-shrink. To connect the Cuda 240i to a true RS-232 radio, first remove t

Summary of the content on the page No. 5

After you've removed the adapter segment, use wire pliers to expose the ends of the five remaining wires in the cable. Cut off the black, blue and white wires, then seal their ends with electrical tape. Black Cut black, blue Blue and white. White Yellow (transmit) Bare wire (shield) After removing the adapter segment, prepare to connect by removing and taping off unneeded wires. Strip the end of the yellow wire. Strip about 1/4-inch (6.35 mm) of insulation from the yellow wire, then follow th

Summary of the content on the page No. 6

Communications Port Configuration Now that you have the devices connected, use the Com Port command in the System Setup Menu to make them communicate. This command opens a menu that allows you to configure the communications port. Menus for changing Com Port settings. If you need additional assistance in configuring the unit to communicate with another device, consult the factory; customer service phone numbers are in the back of the unit's manual. To set Com Port Configuration: 1. Pr

Summary of the content on the page No. 7

To activate NMEA Output: From the Communication Ports menu, press ↓ to highlight NMEA Output. Press ENT to check (turn on) or uncheck (turn off) the NMEA Output checkbox. To exit the Communication Ports menu, press EXIT|EXIT|EXIT. Configure NMEA Once in the Communication Ports menu, you can configure the unit to use specific NMEA sentences. (The default setting has all NMEA sentences turned on.) Press ↓ to CONFIGURE NMEA|ENT. NMEA Sentences selection menu. A menu appears showing the prefixes of

Summary of the content on the page No. 8

• GGA transmits time, position and fix related data. • APB transmits autopilot information. • RMC and RMB transmits navigation information messages. • GSA and GSV transmits fix mode, DOP values and satellites in view information. • DBT transmits the depth below the transducer. • DPT transmits the depth • MTW transmits the water temperature. 4. When the desired prefixes are checked or unchecked, press EXIT|EXIT|EXIT|EXIT to return to the previous page. Compatibility With Various VHF Radios The Di


Alternative user manuals
# User manual Category Download
1 Eagle Electronics CUDA 242 User manual SONAR 270
2 Eagle Electronics CUDA 350 S/MAP User manual SONAR 243
3 Eagle Electronics FISHEASY 245DS User manual SONAR 201
4 Eagle Electronics SILENT SIX/SIXTY 966-0087-01 User manual SONAR 11
5 Eagle Electronics FISHMARK 320 User manual SONAR 323
6 Eagle Electronics TRIFINDER 2 User manual SONAR 382
7 Eagle Electronics FISHEASY 2T User manual SONAR 27
8 Eagle Electronics FISHEASY 240 User manual SONAR 83
9 Eagle Electronics CUDA 300 User manual SONAR 697
10 A&D AD-4406 User manual SONAR 23
11 Adam Equipment 9520 User manual SONAR 0
12 ClearOne comm unicationsGT1524 User manual SONAR 1
13 Eagle Electronics CUDA 242 User manual SONAR 270
14 Eagle Electronics CUDA 350 S/MAP User manual SONAR 243
15 Eagle Electronics FISHEASY 245DS User manual SONAR 201