Streszczenie treści zawartej na stronie nr. 1
User’s Guide
W2452V
Make sure to read the Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for future reference.
See the label attached on the product and give the information to your
dealer when you ask for service.
Streszczenie treści zawartej na stronie nr. 2
Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national stan
Streszczenie treści zawartej na stronie nr. 3
Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures wh
Streszczenie treści zawartej na stronie nr. 4
Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting the stand 1. Place the monitor with its front facing downward on a soft cloth. 2. Assemble the Stand Body into the product in the correct direction as shown in the picture. Hinge Body Stand Body 3. Assemble the Stand Base (Front, Rear) into the Stand Body in the correct direction
Streszczenie treści zawartej na stronie nr. 5
Connecting the Display Disassembling the stand 1. Put a cushion or soft cloth on a flat surface. 2. Place the monitor face down on the cushion or soft cloth. 3. Slide the Cable Deco Cover out from the stand body. 4. Loosen the screw, then take off the stand base from stand body. 5. Please pull the stand body lightly to separate it from the hinge body. Important Your monitor may differ from the items shown in the picture. A4
Streszczenie treści zawartej na stronie nr. 6
Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range: -5˚~20˚ Swivel: 355˚ Ergonomic It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees. A5
Streszczenie treści zawartej na stronie nr. 7
Connecting the Display Using the Computer 1. Make sure to turn off the computer and product. Connect the cable as below sketch map form 1 to 2 . NOTE A Connect DVI Cable This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as B Connect Dsub Cable (PC) shown. User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with C Connect Dsub Cable (Mac) ferrite cores to maintain standard compliance f
Streszczenie treści zawartej na stronie nr. 8
Connecting the Display 4. Press the SOURCE button at the front side of the monitor. INPUT RGB When connecting with a DVI signal input cable. DVI • Select DVI: DVI digital signal. HDMI When connecting with a D-sub signal cable. • Select RGB: D-sub analogue signal. When connecting with a HDMI cable. • Select HDMI A7
Streszczenie treści zawartej na stronie nr. 9
Control Panel Functions Front Panel Controls 12 3 4 5 7 6 Control Function FUN Button Use this button to enter EZ ZOOMING, 4:3 IN WIDE, PHOTO EFFECT, SOUND items, for more information, refer to page A17-A18. Use this button to enter On Screen Display Sub-menu to adjust BRIGHTNESS directly. Use this button to enter or exit from the On Screen Display. MENU Button OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that these settings are not inadvertently changed.
Streszczenie treści zawartej na stronie nr. 10
Control Panel Functions Control Function Use these buttons to select or adjust functions in the On Buttons Screen Display. Button For more information, refer to page A19~A20. () Use this button to make RGB, DVI or HDMI connector Button active. This feature is used when two computers are (SOURCE) connected to the display. The default setting is RGB. *HDMI is optimized on the AV equipment. INPUT RGB DVI DVI HDMI Use this button to select an icon in the On Screen AUTO/SET Display. Button AUTO IMAGE
Streszczenie treści zawartej na stronie nr. 11
On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. NOTE Allow the display to stabilize for at least 30 minutes before making image adjustments. To make a
Streszczenie treści zawartej na stronie nr. 12
On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. ● : Adjustable R : RGB Input * : only for RGB/DVI Input D : DVI Input ** : only for HDMI Input H : HDMI Input NOTE The order of icons may differ depending on the model (A11~A20 ). A11
Streszczenie treści zawartej na stronie nr. 13
On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears. Main Menu MENU : Exit : Adjust (Decrease/Increase) SET : Enter : Select another sub-menu : Restart to select sub-menu Button Tip Menu Name Sub-menus Icons NOTE OSD (On Screen Display
Streszczenie treści zawartej na stronie nr. 14
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PICTURE PICTURE RGB/DVI input BRIGHTNESS To adjust the brightness of the screen. To adjust the contrast of the screen. CONTRAST GAMMA Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images. HDMI input BLACK LEVEL To set high or low offset level. (only for HDMI input) MENU : Exit : Decrease : Increase SET : Select another sub-me
Streszczenie treści zawartej na stronie nr. 15
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description TRACKING TRACKING HORIZONTAL To move image left and right. VERTICAL To move image up and down. To minimize any vertical bars or CLOCK stripes visible on the screen background. The horizontal screen size will also change. To adjust the focus of the display. PHASE This item allows you to remove any horizontal noise and clear or sharpen the image of characters. MENU : Exit : Decrease SHARPNESS To adjust the clearness o
Streszczenie treści zawartej na stronie nr. 16
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description SETUP SETUP To choose the language in which the LANGUAGE control names are displayed. OSD To adjust position of the OSD window POSITION on the screen. If the output of the video card is different WHITE BALANCE the required specifications, the color level may deteriorate due to video RGB/DVI input signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video ca
Streszczenie treści zawartej na stronie nr. 17
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PIP To select PIP on or off. PIP On/Off *It only supports D-Sub & HDMI combination input signal. PIP Position To select PIP Window position: • Top left • Bottom left • Bottom right • Top right MENU : Exit *It operates only when PIP is on. : Adjust : Adjust SET : Select another sub-menu A16
Streszczenie treści zawartej na stronie nr. 18
On Screen Display(OSD) Selection and Adjustment The OSD screen will appear when you touch the FUN button on the left bottom of the monitor. SOUND Main menu Sub menu Description EZ ZOOMING EZ Zoom lowers the display’s resolution in single-step increments. Depressing the button once lowers the resolution by one step; while a second button-press returns the resolution to the original display settings. *This function is operated only if the forteManager is installed to PC. *ForteManager is not su
Streszczenie treści zawartej na stronie nr. 19
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PHOTO EFFECT - NORMAL: The PhotoEffect function is disabled. - GAUSSIAN BLUR: This option is to add the effect to the screen that the dark and sharp image becomes brighter and more blurred. - SEPIA: This option changes the screen to be Sepia tone. The Sepia tone is brown color tone. - MONOCHROME: This option changed the screen to be Gray tone. The screen image is displayed with just white, black, gray colors. SOUND
Streszczenie treści zawartej na stronie nr. 20
On Screen Display(OSD) Selection and Adjustment The OSD screen will appear when you touch the button on the left bottom of the monitor. Menu Name Icons Sub-menu Name Main menu Sub menu Description MOVIE This is for animation images in videos or movies. INTERNET This is for text images (Word processing etc). (only for RGB/DVI input) This is for game images. GAME INTERNET (only for HDMI input) NORMAL This is under normal operating conditions. (only for RGB/DVI input) STANDARD Th
