Resumo do conteúdo contido na página número 1
Model No.
TH-85PB1U
Operating Instructions
Display Operations
Interactive Plasma Display
Before connecting, operating or adjusting this product,
English
please read these instructions completely.
Please keep this manual for future reference.
Resumo do conteúdo contido na página número 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to quali ed service personnel. The lightning flash with The exclamation point within arrowhead within a triangle a triangle is intended to is in tend ed to tell the user tell the user that important that parts inside the product operating and servicing are a risk of electric shock instructions are in the papers to per so
Resumo do conteúdo contido na página número 3
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli ers) that produce heat. 9) Do not defeat the safety purpose o
Resumo do conteúdo contido na página número 4
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Plasma Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt as well, and record the model number and serial number of your set in the space provided on the rear cover of these instructions. Visit our Panasonic Web Site http://p
Resumo do conteúdo contido na página número 5
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee tha
Resumo do conteúdo contido na página número 6
Safety Precautions CAUTION This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Panasonic Corporation.) • Pedestal .................................................................... TY -ST85P12 • Mobile Stand for Display ........................................... TY -ST85PB1 • Floor stand ...
Resumo do conteúdo contido na página número 7
Safety Precautions WARNING Ensure that the mains plug is easily accessible. Setup Do not place the Plasma Display on sloped or unstable Make sure to use the dedicated wall outlet for this unit. surfaces, and ensure that the Plasma Display does not • Sharing it with other devices may cause excessive heat hang over the edge of the base. resulting in re. • The Plasma Display may fall off or tip over. Securely insert the power cord plug as far as it will go. Do not place any objects on top of
Resumo do conteúdo contido na página número 8
Accessories Accessories Supplied Check that you have the Accessories and items shown Operating CD-ROM × 1 Remote Control Transmitter Batteries for the Instruction book N2QAYB000691 Remote Control Transmitter • Operating Instructions (AA Size × 2) Display Operations Network Operations • Software license statements GNU GENERAL PUBLIC LICENSE GNU LESSER GENERAL PUBLIC LICENSE Fixing band × 2 Clamper × 1 TMME203 TMM15412-2 Use the clamper when connecting a LAN cable. (refer to
Resumo do conteúdo contido na página número 9
Accessories Remote Control Batteries Requires two AA batteries. 1. Pull and hold the hook, then 2. Insert batteries - note correct 3. Replace the cover. open the battery cover. polarity (+ and -). “AA” size - + + - Helpful Hint: For frequent remote control users, replace old batteries with Alkaline batteries for longer life. Precaution on battery use Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter. Disposal of batteries should be
Resumo do conteúdo contido na página número 10
Connections Cable xing – How to Unfasten the AC cord Loosen the xing band securing the AC cord. To loosen: Push the catch Pull – Cable xing bands Secure any excess cables with bands as required. Note: Two xing bands are supplied with this unit. In case of securing cables at three positions, please purchase it separately. Pass the attached To secure cables connected to Terminals, wrap the cable xing band around them then pass the pointed end through the locking block, as shown in th
Resumo do conteúdo contido na página número 11
Connections Video equipment connection SLOT: Terminal board (optional accessories) insert slot (see page 6) Note: The lower side slot is for terminal board with 2-slot width. The terminal board with 1-slot width does not function when installed in the lower side slot. SERIAL: AUDIO OUT: AV IN (VIDEO): Composite Video Input Terminal Connect to sound (see page 12) Control the Plasma Display equipment. COMPONENT/RGB IN: Component/RGB Video by connecting to PC. Input Terminal (see pag
Resumo do conteúdo contido na página número 12
Connections AUDIO OUT Terminals connection audio equipment Stereophonic sound code line-in VIDEO and COMPONENT / RGB IN connection Note: Additional equipment, cables and adapter plugs shown are not supplied with this set. VIDEO OUT L RCA-BNC Adapter plug AUDIO VCR R OUT AUDIO L-R: Shared with VIDEO and COMPONENT/RGB IN Notes: • Change the “COMPONENT/RGB-IN SELECT” setting in the “SETUP” menu to “COMPONENT” (when COMPONENT signal connection) or “RGB” (when RGB signal connection). (see page 4
Resumo do conteúdo contido na página número 13
Connections HDMI connection [Pin assignments and signal names] Pin No. Signal Name Pin No. Signal Name T.M.D.S Clock 1 11 T.M.D.S Data2+ Shield T.M.D.S Data2 2 12 T.M.D.S Clock- Shield 3 13 T.M.D.S Data2- CEC 4 T.M.D.S Data1+ Reserved 14 T.M.D.S Data1 HDMI cable 5 (N.C. on device) 19 3 1 Shield 6 15 T.M.D.S Data1- SCL 7 T.M.D.S Data0+ 16 SDA T.M.D.S Data0 DDC/CEC 8 17 Shield Ground 9 18 T.M.D.S Data0- +5V Power 4 2 18 HDMI AV OUT 10 19 Hot Plug Detect T.M.D.S Clock+ DVD player Note: Addit
Resumo do conteúdo contido na página número 14
Connections PC Input Terminals connection Shared with DVI-D IN. COMPUTER Conversion adapter (Female) (if necessary) (Male) Mini D-sub 15p Stereo mini plug (M3) Connect a cable which matches the audio output terminal on the computer. Notes: • With regard to the typical PC input signals that are described in the applicable input signals list (see page 62), adjustment values such as for the standard picture positions and sizes have already been stored in this unit. You can add up to eight PC inp
Resumo do conteúdo contido na página número 15
Connections SERIAL Terminals connection The SERIAL terminal is used when the Plasma Display is controlled by a computer. Note: To use serial control for this unit, make sure to set the “CONTROL I/F SELECT” in the “NETWORK SETUP” menu to “RS-232C”. (refer to “Operating Instructions, Network Operations”) COMPUTER (Male) 9 8 7 6 52 4 3 1 RS-232C Straight cable Pin layout for SERIAL Terminal (Female) D-sub 9p Notes: • Use the RS-232C straight cable to connect the computer to the Plasma Display.
Resumo do conteúdo contido na página número 16
Power ON / OFF Connecting the plug to the Wall Outlet. Press the Power switch on the Plasma Display to turn the set on: Power-On. Power Indicator: Green Right side surface [Starting up the network] It takes some time for the network to start up just after the Main Power power is turned on. On / Off Switch During that time, “NETWORK SETUP” in the “SETUP” menu is grayed out and cannot be set. Remote Control Power Indicator Sensor Press the button on the remote control to turn the Plasma Displ
Resumo do conteúdo contido na página número 17
Power ON / OFF When rst switching on the unit Following screen will be displayed when the unit is turned on for the rst time. Select the items with the remote control. Unit buttons are invalid. OSD LANGUAGE DAY/TIME SETUP DISPLAY ORIENTATION OSD LANGUAGE DISPLAY ORIENTATION DAY/TIME SETUP English (UK) TIME MON 99:99 LANDSCAPE Deutsch SET PORTRAIT Français DAY MON Italiano 99:99 TIME Español ENGLISH (US) DAY/TIME SETUP TIME MON 99:99 SET DAY TUE 10:00 TIME SELECT
Resumo do conteúdo contido na página número 18
Selecting the input signal Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display. Input signals will change as follows: PC NETWORK VIDEO COMPONENT* HDMI DVI PC: PC input terminal in PC IN. NETWORK: Network input terminal in LAN or WIRELESS MODULE. VIDEO: Video input terminal in AV IN (VIDEO). COMPONENT*: Component or RGB input terminal in COMPONENT/RGB IN. HDMI: HDMI input terminal in AV IN (HDMI). DVI: DVI input terminal in DVI-D
Resumo do conteúdo contido na página número 19
Basic Controls Main Unit Right side Enter / Aspect button surface (see page 21, 23) Volume Adjustment ENTER/ Volume Up “+” Down “–” When the menu screen is displayed: + / “+” : press to move the cursor up VOL “–” : press to move the cursor down - / (see page 23) MENU Brightness Sensor Detects the brightness in MENU Screen ON / OFF INPUT the viewing environment Each time the MENU button is pressed, the menu screen will switch. (see page 23) Remote control sensor Normal Viewing PICTURE SETUP
Resumo do conteúdo contido na página número 20
Basic Controls Remote Control Transmitter OFF TIMER button The Plasma Display can be preset to switch to stand- by after a xed period. The setting changes to 30 ACTION button minutes, 60 minutes, 90 minutes and 0 minutes (off Press to make selections. timer cancelled) each time the button is pressed. ASPECT button 30 MIN 60 MIN 90 MIN Press to adjust the aspect. 0 MIN(Cancel) (see page 21) When three minutes remain, “OFF TIMER 3 MIN” Standby (ON / OFF) button will ash. The Plasma Display
