Manual do usuário Sony SRP-X500P

Resumo do conteúdo contido na página número 1

SONy

BID SPECIFICATION
FOR
POWERED MIXER




MODEL NUMBER
SRP-X500P






INSTRUCTIONS:
REMOVE THIS COVER PAGE AND ADD TO REQUESTS FOR QUOTATION AND
PROPOSALS. THE OBJECTIVE OF THIS BID SPECIFICATION IS TO ASSIST YOU IN
CLEARLY SPECIFYING THE SONY PRODUCT IDENTIFIED ABOVE, AND ENSURING
THAT THE BUYER IS WELL INFORMED OF THE HIGH STANDARD OF
PERFORMANCE THAT IS TO BE EXPECTED OF A SONY PRODUCT. THE
INFORMATION IN THIS DOCUMENT IS CURRENT AS OF JUNE 2006. PRODU

Resumo do conteúdo contido na página número 2

1.0 General Information The purpose of this information is to provide the specification for a product whose primary purpose is the signal distribution of audio, video and / or computer graphics information to audio speakers, video or graphics displays or other processing devices. The distribution of these signals is to be accomplished via a rack mountable signal processing device. This document provides the minimum specifications for this device. 2.0 Description This pro

Resumo do conteúdo contido na página número 3

480P (60Hz) 575P (50Hz) 720P (60Hz) 1035i (60Hz) 1080i (50 and 60Hz) VGA Computer Graphics (Modes 1, 2 and 3, 60 – 85Hz) VESA 800x600 Computer Graphics (56 – 85Hz) VESA 1024x768 Computer Graphics (43 – 85Hz) VESA 1152 x 864 Computer Graphics (70 – 75Hz) SUN 1152 x 900 Computer Graphics (65 – 76Hz) VESA 1280 x 1024 Computer Graphics (43 – 60Hz) Mac 13” Computer Graphics Mac 16” Computer Graphics 4.0 User Interface / Controllability Information Control of this devi

Resumo do conteúdo contido na página número 4

The advanced serial control jack shall employ the use of a standardized device control protocol that is commonly accepted and understood by control systems manufacturers. This control jack shall accept and transmit bi-directional serial commands that provide full control over the device, and provide acknowledgement to the control system of the received command. The parallel (contact closure) control jack shall employ the use of standardized device control protocol that is commonly acce

Resumo do conteúdo contido na página número 5

5.0 Performance Specifications This device shall fully support all video color systems using pass-through capability. The maximum video bandwidth shall be at least 10MHz. The maximum RGB bandwidth shall be at least 150MHz. The device shall be capable of passing a resolution of at least 1280 x 1024 pixels at 60Hz refresh. This device shall support audio signals within the frequency range of 20Hz to 20,000Hz This device shall include four channels of built-in audio amplifiers

Resumo do conteúdo contido na página número 6

7.0 Connectivity Information This device shall provide for connection of multiple source devices without employing the use of an external interface. These connections shall include the following: (4) Balanced microphone inputs on XLR 3-pin connectors (1) Unbalanced stereo line input on RCA (Phono) connectors (5) Unbalanced stereo inputs on RCA (Phono) connectors for AV/RGB source follow. (3) Composite video inputs on RCA (Phono) connectors (2) Component / Analog RGB inputs o