Resumo do conteúdo contido na página número 1
Model iP11
Alarm Clock for
®
your iPhone and iPod
Questions? Visit www.ihomeaudio.com
Resumo do conteúdo contido na página número 2
Table of Contents Quick Start 1 Controls and Indicators 2 iP11 Display 3 Install Clock Backup Battery 3 4 Setting the Clock 5 Charging your iPhone/iPod 5 Listening to your iPhone/iPod 5 Listening to other portable audio devices 6 Alarm Operation 7 Sleep Operation 7 Snooze/Dimmer Operation 8 A Consumer Guide to Product Safety 9 Trouble Shooting 10 Solución De Problemas 11 Warranty Information Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat.
Resumo do conteúdo contido na página número 3
FCC Information This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules. These limits provide reasonable protection against radio and TV interference in a residential area
Resumo do conteúdo contido na página número 4
iP11 Quick Start 3:iPhone/iPod 1:power 2:inserts dst -1 +1 on o line in DC 10V Select the dock insert for your iPhone or iPod model from the table Insert iPhone/iPod into dock with proper Attach AC adaptor cable to jack on below and place insert in dock. insert (iPhone/iPod must not be in a skin or back of the iP11 and plug the other Never dock an iPhone or iPod case). iPhone/iPod will charge while docked. end into a wall socket. without an insert in place. Press iPhone/iPod Button on iP
Resumo do conteúdo contido na página número 5
Controls and Indicators Front Panel Alarm Set / Alarm On/Off Button Dock Power Off / iPhone/iPod Play/Pause Button Alarm Reset Button Hour Set Button Snooze/Dimmer Button Sleep/Minute Set Button Volume + Button Volume - Button Back Panel Time sync/set Button dst EXB Expanded Bass Switch DST Switch -1 +1 on o DC Jack Line-in Jack line in DC 10V 2
Resumo do conteúdo contido na página número 6
iP11 Display PM Indicator Battery Low Indicator Daylight Saving Time Indicator iPhone/iPod Indicator Time Display Alarm Indicator Sleep Indicator Install Clock Backup Battery The iP11 uses a CR2032 button cell backup battery system to provide continuous alarm operation and clock settings in the event of a power failure. If the Backup Battery has been installed and a power failure occurs or the AC adaptor is accidentally disconnected, the display backlight will not remain lit, but current
Resumo do conteúdo contido na página número 7
Setting the Clock Setting the Clock Time 1. Press and hold the Time sync/set Button for 2 seconds until the display flashes. Press the Hour Set Button until the current hour is displayed. Next, press the Sleep/Minute Set Button to set the current minute. 2. Press the Time sync/set Button again to confirm the clock setting. You should hear 2 beeps indicating the clock time is set. 3. For 12 hour or 24 hour time format setting: Press the Alarm Set Button during time setting to set 1
Resumo do conteúdo contido na página número 8
Charging your iPhone/iPod Note: Please make sure you are using the correct insert for your iPhone/iPod (see page 1) and that it is properly docked into the iP11. Failure to do so may damage your iPhone/iPod. 1. While your iPhone/iPod is docked in the unit and the unit is connected to AC power, it recharges (until fully charged). The iP11 will not overcharge your iPhone/iPod. Note that non-docking iPods will NOT charge. Listening to your iPhone/iPod 1. Dock the already playing iPhone/iPod. The
Resumo do conteúdo contido na página número 9
Alarm Operation The iP11 Home System for iPhone/iPod features “Sure Alarm”. If a power failure occurs or the AC adaptor is accidentally disconnected, the unit will change to buzzer alarm to wake you up (provided you have installed backup battery). This unit also features Gentle Waking, which gradually increases the volume of whatever alarm you set. NOTE: TO WAKE TO iPhone/iPod, YOUR iPhone/iPod MUST BE PROPERLY DOCKED AND OFF (NOT IN PLAY MODE) OR NO ALARM WILL SOUND. You CANN
Resumo do conteúdo contido na página número 10
Sleep Operation 1. When the iP11 is off or while listening to your iPhone/iPod, press the Sleep/Minute Set Button to enter sleep mode. The Sleep Icon will appear on the display to indicate it is in sleep mode. Sleep mode has a Gentle Sleep feature which gradually lowers the volume before it shuts off. 2. You can adjust the sleep timer from 90, 60, 30 or 15 minutes by pressing the Sleep/Minute Set Button again.The unit will automatically turn off after the selected time. 3. When the displ
Resumo do conteúdo contido na página número 11
A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. Water and Moisture – The unit should n
Resumo do conteúdo contido na página número 12
Trouble Shooting Symptom Possible Problem Solution Unit doesn’t respond AC adaptor isn’t plugged to a wall outlet or Plug the AC adaptor into a wall outlet and plug the connector into (no power) the connector is not plugged into the power the power supply jack on the unit supply jack on the back of the unit Wall outlet is not functioning Plug another device into the same outlet to confirm the outlet is working iPhone/iPod cannot Using no or wrong iPhone/iPod insert Make sure the dock insert is
Resumo do conteúdo contido na página número 13
Solución De Problemas Síntoma Posible Problema Solución La unidad no El adaptador de AC no está conectado al Conecte el adaptador de AC al tomacorriente y también funciona (no circula tomacorriente o el conector no está conectado conecte el conector a la ficha en la parte posterior de la unidad corriente eléctrica) a la ficha en la parte posterior de la unidad El tomacorriente no funciona Coloque otro aparato en ese mismo tomacorriente para confirmar si el que no funciona es el tomacorriente
Resumo do conteúdo contido na página número 14
Limited 1 Year Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 Year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service still
