Resumo do conteúdo contido na página número 1
<< Previous Next >>
Installing Your Multifunction
to Your Network for the First Time
PIXMA MG5220
Mac OS
1
Resumo do conteúdo contido na página número 2
<< Previous Next >> Installing Your Multifunction to Your Network for the First Time PIXMA MG5220 Mac OS Preparing to Connect My Multifunction To My Network 3 Connecting Your MG5220 To Your Network 5 Installing The MG5220 Software 12 2
Resumo do conteúdo contido na página número 3
Preparing to Connect My Multifunction << Previous Next >> To My Network Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network. 3
Resumo do conteúdo contido na página número 4
Preparing to Connect My Multifunction << Previous Next >> To My Network An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported. Be sure to prepare an access point. Notes on Network Connection • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to your device's instruction manual or conta
Resumo do conteúdo contido na página número 5
Connecting Your MG5220 To Your Network << Previous Next >> Step 1 Step 2 Use the ↑ or ↓ button (A) to display Use the ← or → button (C) to select Setup, then press the right FUNCTION Wireless LAN setup, then press the button (B). OK button. 5
Resumo do conteúdo contido na página número 6
Connecting Your MG5220 To Your Network << Previous Next >> Step 3 Step 4 Select Yes, then press the OK button. Select Easy setup, then press the OK button. When wireless connection is enabled, the Wi-Fi lamp lights blue. 6
Resumo do conteúdo contido na página número 7
Connecting Your MG5220 To Your Network << Previous Next >> Step 5 Step 6 Select the access point name you Make sure that one of the below wrote down, then press the OK screens is displayed, then press the button. right FUNCTION button. If neither is displayed, go to Step 9. Note: • Nearby access points may be detected. • Access point names with 2-byte characters are not displayed properly, however, they can be selected. 7
Resumo do conteúdo contido na página número 8
Connecting Your MG5220 To Your Network << Previous Next >> Step 7 Enter the network key you wrote down on, then press the left FUNCTION button (E). 1. Press the center FUNCTION button (F) to switch character entry modes. 2. Enter upper and lower case letters of the alphabet correctly. 8
Resumo do conteúdo contido na página número 9
Connecting Your MG5220 To Your Network << Previous Next >> Step 7 (continued) Character Entry This machine allows you to enter characters when an on-screen keyboard is displayed. Follow the procedure below. 1. When the on-screen keyboard shown above is displayed, press the center FUNCTION button (A) to switch to a keyboard having the characters you want to use. Four character sets are available: Upper-case alphabets, lower-case alphabets, numbers, and symbols. Each time you press the cent
Resumo do conteúdo contido na página número 10
Connecting Your MG5220 To Your Network << Previous Next >> Step 7 (continued) Character Entry 2. Select a character on the on- screen keyboard using the ↑↓←→ buttons (B) then press the OK button to enter it. Entered characters are displayed on the upper section (C) of the on-screen keyboard. • To insert a space, select Space on the on-screen keyboard and press the OK 3. Repeat (1) and (2) to enter button. more characters. • To insert characters, select the section (C) of the screen using
Resumo do conteúdo contido na página número 11
Connecting Your MG5220 To Your Network << Previous Next >> Step 8 Step 9 Make sure that the network key is When the screen below correct, then press the OK button. appears, press the OK button. Your MG5220 is now connected to your network Note: • If Failed to connect to the access point. appears, press the OK button, make sure that the network key is correct, then enter it again. If a connection still cannot be established, refer to the printed manual: Network Setup Troubleshooting. 11
Resumo do conteúdo contido na página número 12
Installing The MG5220 Software << Previous Next >> Now that your MG5220 is connected to your network, we need to install the driver and the included software. Before we begin: • Log on as the administrator (or a member of the Administrators group). • Quit all running applications before installation. • If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access the network. If such a warning message appears, set th
Resumo do conteúdo contido na página número 13
Installing The MG5220 Software << Previous Next >> Step 1 Step 2 Turn on the computer, then insert the Double-click the Setup icon of the Setup CD-ROM into the CD-ROM CD-ROM folder to proceed to the drive. If you are using Windows, the following screen. setup program starts automatically. Enter your administrator name and password, then click OK. Note: If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the desktop. If the program does not start automatically
Resumo do conteúdo contido na página número 14
Installing The MG5220 Software << Previous Next >> Step 3 Step 4 Click Easy Install Click Install The drivers, application software, and on-screen manuals are installed. Note: If you want to select particular items to install, click Custom Install. 14
Resumo do conteúdo contido na página número 15
Installing The MG5220 Software << Previous Next >> Step 5 Step 6 Select Use the printer on When the Printer Detection screen network, then click Next. appears, click Next. IMPORTANT IF THE PRINTER CONNECTION SCREEN APPEARS INSTEAD OF THE SCREEN ABOVE, THE CONNECTION METHOD IS NOT CORRECTLY SELECTED IN 5. CLICK CANCEL AND START AGAIN FROM STEP 1, THEN BE SURE TO SELECT USE THE PRINTER ON NETWORK IN 5. 15
Resumo do conteúdo contido na página número 16
Installing The MG5220 Software << Previous Next >> Step 7 Step 8 On the Canon IJ Network Tool When the Register Printer and screen, select MG5200 series in Scanner screen appears, click Printers, then click Next. Register Printer. Note: The alphanumeric characters after Canon MG5200 series is the machine's Bonjour service name or MAC address. If the machine is not detected, refer to the printed manual: Network Setup Troubleshooting. Make sure there is no problem, then click Update 16
Resumo do conteúdo contido na página número 17
Installing The MG5220 Software << Previous Next >> Step 9 Step 10 For OS X v. 10.6.x and 10.5.x only For OS X v. 10.4.11 only Select Canon MG5200 series 1. When the Printer List window canonijnetwork and click Add. appears, click Add. Go to Step 11. Note: It may take a minute or two before the printer appears in the list Note: When the “You have no printers available”. screen appears, click Add. 17
Resumo do conteúdo contido na página número 18
Installing The MG5220 Software << Previous Next >> Step 10 (continued) Step 10 (continued) 2. Click More Printers in the Printer 3. Click More Printers in the Printer Browser window. Browser window. 4. Make sure that Canon MG5200 series is added to the list of printers. 18
Resumo do conteúdo contido na página número 19
Installing The MG5220 Software << Previous Next >> Step 11 Step 12 When the Register Printer and Select MG5200 series on the Scan- Scanner screen appears, click from-Operation-Panel Settings Register Scanner. screen, then click OK. 19
Resumo do conteúdo contido na página número 20
Installing The MG5220 Software << Previous Next >> Step 13 Step 14 Click Next on the Register Printer and Follow any on-screen instructions to Scanner screen. proceed with the remaining software installation. Wireless setup is now complete 20
