Resumo do conteúdo contido na página número 1
OWNER'S MANUAL
48CM CORDLESS REMOTE COLOUR TELEVISION
MODEL: 4890
Type Tested
Electrical
Safety
AS/NZS 3250 Lic 4178
Standards Australia
APP No: N15958
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL:(02)9313 7111
FAX:(02)9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA:1300 657 888
Resumo do conteúdo contido na página número 2
Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain is manual in an easily accessible location for future reference. Contents Notes for operation .................................................................................................... 1 Installation and Appearance 2 Antenna connection ..................................
Resumo do conteúdo contido na página número 3
This equipment has been designed and manufactured to meet the highest international standards, but, like any electrical apparatus which is operated at mains voltage, care must be taken if you are to obtain the best results and safety is to be assured. This is particularly important with audio and TV equipment. DO read this handbook carefully and keep it handy for ready reference. ensure that all electrical connections (including the mains plug, extension leads and DO interconnections between pie
Resumo do conteúdo contido na página número 4
CONTROL PANEL ANTENNA INPUT POWER SWITCH POWER INDICATOR AV IN OUT REMOTE SENSOR 1. ANTENNA CONNECTIONS 1.1 Optimum colour reception requires a good antenna. An out-door antenna will be more effective to obtain a clear-picture. 1.2 Insert the out-door antenna into the antenna socket on the cabinet back. Adjust the direction or position of the outdoor antenna for the best possible picture. 2. POWER SWITCH 2.1 Press the power switch when the power is off, the indicator (red) lights up,
Resumo do conteúdo contido na página número 5
3.1 STANDBY ( ) Button 3.1.1 Press STANDBY ( ) button to turn on the set (the indicator shows yellow) when the set is in STANDBY mode (the indicator shows red) , the channel position number is displayed in the screen. Press STANDBY ( ) button to return the set to the STANDBY mode when the set is in OPERATION mode, and the indicator shows red. 3.2 CHANNEL PRESET 3.2.1 AUTO PRESET 3.2.1.1 Press PRESET ON/OFF button to set PRESET mode. The current band and chan
Resumo do conteúdo contido na página número 6
3.2.2.4 Press PRESET ON/OFF button to exit preset mode. The searched program station has been memorised at the present channel position, 3.2.2.5 Repeat 1~ 4 steps to search another channel. NOTE : * If the same channel position is selected during repeat operation, the former memory will be erased. * If some channel position is tuned by MANUAL TUNING mode, AFC (automatic frequency control) function is defeated in this channel position. 3.3 SKIP BUTTON 3.3.1 FUNCTION When CHANNE
Resumo do conteúdo contido na página número 7
CHANNEL INCREASE CH CH CH 1 2 3 99 0 8 CHANNEL DECREASE 1 2 3 99 0 (REMOTE) (THE APPLIANCE) 3.5 VOLUME CONTROL 3.5.1. Press the VOL button to increase volume ; the green bar on the screen moves right. 3.5.2. Press the VOL button to decrease volume ; the green bar on the screen moves left. Display of minimum volume Display of maximum volume ......................... 3.6 AV/TV SELECTOR Press AV/TV button to change TV mode to AV
Resumo do conteúdo contido na página número 8
4. REMOTE CONTROL OPERATION: REMOTE CONTROL UNIT CH : CHANNEL SELECTOR : STANDBY VOL : VOLUME CONTROL 1 ~ 9 : DIGITAL CHANNEL SELECTOR PPS : PERSONAL PREFERENCE SELECT 10/0 : CHANNEL 10 OR CHANNEL 0 SELECTOR (BRIGHTNESS, COLOUR) SYSTEM : COLOUR SYSTEM CONTROL : PICTURE/TIME ADJUSTMENT -/- - : DIGIT OR TWO DIGIT CHANNEL PICTURE : PICTURE CONTROL SELECT DSP : DISPLAY
Resumo do conteúdo contido na página número 9
4.3 CHANNEL SELECTION 4.3.1 Press CHANNEL SELECTOR ( ) the channel number will be increased or decreased and displayed in the upper right corner of the screen. 4.3.2 Use the DIGITAL CHANNEL SELECTOR button for direct channel selection. 1) 1~10 channel Method 1: - Press 2 Press -/-- 2 Example: To select channel 2 (Display) - - Press -/-- Press 10/0 10 To select channel 10 Method 2: Example: To select channel 2 - - Press 2 Press -/-- Press 10/0 2 10 To select channel 10 - - Pre
Resumo do conteúdo contido na página número 10
4.3.3 PREVIOUS BUTTON Pressing this button to select the channel that was tuned immediately before the one being watched. For example: If you are watching the program on channel 6, and the previous previous programme you watched was was on channel 15; then you can press the button to reach channel 15, press it again to return channel 6. 6 5 4.4 SOUND CONTROL 4.4.1 VOLUME CONTROL 4.4.1.1 Press the VOL button to increase volume; the green bar on the screen moves right. 4.4.1.
Resumo do conteúdo contido na página número 11
4.6 Making use of PPS button (personal preference select) Press the PPS button, the screen will display the following five mode progressively: Press PPS Press PPS again again Press PPS 2 1 5 Press PPS again The above five display modes corresponding analogue quantity is shown in the following chart: Analogue Display BRIGHTNESS COLOUR CONTRAST mode 1 lllllllllllllllllllllllllllllll lllllllllllllllllllllllllllllll lllllllllllllllllllllllllll 2 lllllllllllllllllllllllllll llllllllllllllllllllllllll
Resumo do conteúdo contido na página número 12
4.8 SLEEP BUTTON 4. 8. 1 Using SLEEP button allows you to have the appliance automatically turned off after a pre-determined time, and set the appliance to STAND BY mode. Press SLEEP again SLEEP 0 SLEEP 90 (RED) (GREEN) Decrease 10 minutes at every press SLEEP 10 (GREEN) 4. 8. 2 After the SLEEP function is set, the remaining time will be automatically displayed for 4 seconds every ten minutes. SLEEP 20 NOTE: * If you press STAND BY button while the SLEEP function is operat
Resumo do conteúdo contido na página número 13
4.9.1 CLOCK 4.9.1.1 Press the TIMER button till "CLOCK" displays-on the screen. 4.9.1.2 Press the button to set the present hour. Press the button to set the present minute. 4.9.1.3 After setting the clock, press TIME SET button to start operating. Now the indication on the screen is green instead of red. TIME SET CLOCK CLOCK 0 : 00 12 : 16 4.9.1.4 Use DSP (DISPLAY) button to display the present time on the screen. See "DISPLAY BUTTON" operation
Resumo do conteúdo contido na página número 14
TIME SET OFF TIME OFF TIME 0 : 00 23 : 30 4.9.8.8 Press TIME SET button, then the OFF TIME indication is green instead of red. OFF TIME function starts operating. 4.9.8.4 The appliance will be turned off when your setting time is up, and return to stand by mode. NOTE: * The built-in clock employs the 24-hour system. * The OFF TIME function will be ineffective if the following condition occurs: Press STAND BY button before the setting time
Resumo do conteúdo contido na página número 15
5. INTERFACES This set has Audio & Video input and output sockets which allow direct connection to external equipments for playing back and recording the programs. 5.1. VIDEO PLAYBACK 5.1.1 The figure below shows how to connect the TV set to the video equipment. 5.1.2 Press the AV/TV button on the TV set or on the remote controller to select VIDEO mode, "VIDEO" will be displayed on the screen. The picture shown on the screen is the program from the video equipment. NOTE: The VC
Resumo do conteúdo contido na página número 16
5. 3 DUBBING 5.3.1 The picture below shows how to connect TWO VCRs to the TV for dubbing one from the other. 5. 3. 2 Press AV/TV button of the TV set or on the remote control unit to select Video mode before dubbing, "VIDEO" will be displayed on the screen. The TV set will act as a monitor to help you edit while dubbing. NOTE: The set MUST remain in Video mode and MUST NOT be switched off during the session. 14
Resumo do conteúdo contido na página número 17
6. TROUBLE SHOOTING GUIDE Many apparent malfunctions may be caused by slight misadjustment of regular controls or some other equally similar simple causes. If any problem arises in the operation of your set, first check through this list of symptoms and correction. Should the problem be unsettled, unplug the set and contact your dealer. Symptoms Check these things Try these adjustment . . Press POWER BUTTON Be sure power cord is plugged in. . No picture, . . Try another channel. May be station
Resumo do conteúdo contido na página número 18
7. SPECIFICATIONS: : PAL, B/G; NTSC 3.58/4.43 PLAYBACK TV System: : VHFL 0-5, 5A; VHFH 6-11; UHF 21-69 Receiver Channel : S1-S41 (HYPERBAND) Cable Channel : AC 230-240V, 50Hz Power supply : 48cm Diagonal CRT : VHF/CATV/UHF 75 ohm Antenna Impedance : 566(W) x 422(H) x 465(D) Dimension (mm) : 20kg Weight : 70W Power Consumption Remote Control Unit : DC 3V (2 x AAA) Power Supply * Design and specifications are subject to change without notice. 16
Resumo do conteúdo contido na página número 19
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-51703-05
