Inhaltszusammenfassung zur Seite Nr. 1
EMP Monitor
Operating Guide
Inhaltszusammenfassung zur Seite Nr. 2
1 Meanings of symbols used Indicates something that may cause injury or damage to the projector. CAUTION Indicates information that is related to a topic or which may be useful to know. TIP Indicates a page where a related topic or more a detailed explanation is provided. Indicates the name of a projector port or a computer menu or item name. [ (Name) ] Example: [InputA] [Start]
Inhaltszusammenfassung zur Seite Nr. 3
2 Contents Meanings of symbols used 1 Operating Environment 3 Compatible computers ............................................................3 Before starting operations .......................................................3 Registering projectors for monitoring 4 Registration using automatic detection ...................................5 Registration using IP address (Manual registration) ...............6 Editing the manually-registered projector list ..........................6 Deleting a
Inhaltszusammenfassung zur Seite Nr. 4
3 Operating Environment You can display status information on a computer screen for multiple Compatible computers projectors that are connected to a network and also carry out batch operations on all projectors such as turning the power on and off and changing the image * Macintosh computers cannot be used. source. A maximum of 64 projectors can be monitored and controlled by batch OS* 98SE/Me/NT4.0/2000 Professional/XP Home Edition/XP operations. Professional CPU Pentium MMX 166 MHz or high
Inhaltszusammenfassung zur Seite Nr. 5
4 Registering projectors for monitoring This operation is carried out when starting EMP Monitor for the first time after it has been installed and when you would like to add projectors. Once a projector has been registered, the status for the projector will be displayed automatically each time EMP Monitor is started from that point onwards. PROCEDURE Click [Start] - [Programs] (or [All Programs]) - [EPSON 1 Projector] - [EMP Monitor] in that order to start EMP Monitor. Click [Register proje
Inhaltszusammenfassung zur Seite Nr. 6
5 Registering projectors for monitoring Registration using automatic detection TIP • Projectors that have been registered using automatic detection will be re-detected on the basis of projector name and the IP addresses for PROCEDURE these projectors will be displayed each time EMP Monitor is started. Click [Auto detect] in the [Register projector] 1 If a password entry screen is displayed, enter the password for the dialogue box. projector's Administrator and then click [OK]. If more than
Inhaltszusammenfassung zur Seite Nr. 7
6 Registering projectors for monitoring Registration using IP address (Manual registration) Editing the manually-registered projector list Use the following procedure to change the projector name or IP address for projectors that have been registered manually. PROCEDURE PROCEDURE Click [Manual registration] in the [Register projector] 1 dialogue box. Select the projector to be edited in the [Register 1 projector] dialogue box, and then click [Edit]. 2 Enter the IP address for the projector to
Inhaltszusammenfassung zur Seite Nr. 8
7 Main EMP Monitor window The main window shows the status information for each projector. To carry Button functions our operations for projectors, select the projectors from the projector list and then click the buttons. The power can be turned on or off and the image source can be changed for the projectors that are selected from the projector list. The same operations can also be carried out using the commands in the [Tools] menu. Detail display Shows detailed information for the selected
Inhaltszusammenfassung zur Seite Nr. 9
8 Main EMP Monitor window Understanding the projector list Error information: Uses the following icons to show the status if an error occurs with a projector. The projector list uses the following icons to show the projector statuses. Replace with a new lamp. "Replacing the Lamp" Status:Shows the projector status. End of lamp life warning in the "Replacing Power on and normal status Consumables" section of the accessory User's Guide. Power off and normal status "Reading the Indicators" Lam
Inhaltszusammenfassung zur Seite Nr. 10
9 Main EMP Monitor window Displaying detailed information You can check detailed information on the status of individual projectors that are connected. PROCEDURE Select the projector to be checked in the main 1 window. 2 Click [View details]. Click to display details. The details that are displayed may vary slightly depending on the projector connected. Detailed status information will be displayed in the [Details] dialogue box.
Inhaltszusammenfassung zur Seite Nr. 11
10 A projector cannot be monitored or controlled using EMP Monitor Cause Remedy Is the projector connected to Connect the network cable correctly. the network correctly? "Network Cable Connections" in the accessory User's Guide Has the projector been set Check the settings for the "Network" up correctly for connection configuration menu command. to the network? Accessory User's Guide Has EMP Monitor been Uninstall EMP Monitor and then re-install installed to the computer it. correctly? Have
Inhaltszusammenfassung zur Seite Nr. 12
11 All rights reserved. No part of this publication may be reproduced, General Notice: stored in a retrieval system, or transmitted in any form or by any means, EPSON is a registered trademark of SEIKO EPSON CORPORATION. electronic, mechanical, photocopying, recording, or otherwise, without Windows and Windows NT are trademarks of Microsoft Corporation in the prior written permission of SEIKO EPSON CORPORATION. No the United States of America and other countries. patent liability is assumed wi
