Resumen del contenido incluido en la página 1
32” HD Ready LCD TV
DGL32
User’s Manual
Resumen del contenido incluido en la página 2
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruct
Resumen del contenido incluido en la página 3
10. POWER SOURCES This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions. 11. GROUNDING OR POLARIZATION This unit is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This pl
Resumen del contenido incluido en la página 4
TO PREVENT POSSIBLE DANGER, ELECTRIC SHOCK, AND OTHER INJURIES WHEN HANDLING YOUR DISPLAY, PLEASE BE AWARE ALL WARNINGS AND SAFETY PRECAUTIONS CONTAINED AS BELOW. Never Insert anything into DISPLAY!! Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts. Never spill liquid of any kind on the Display。 Do not attempt to service the DISPLAY yourself!! Opening or removing covers may expose you to dangerous
Resumen del contenido incluido en la página 5
CONFORMITY AND COMPLIANCE FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful in
Resumen del contenido incluido en la página 6
Table of contents Table of contents Introduction Congratulations on the purchase of your LCD TV. This handbook has been designed to help you install and operate your display. We would recommend reading it thoroughly. Table of contents Page Getting Start Features…………………………………………………………. 6 Standard Accessories…………………………………………. 6 Location of Controls.…………………….………………….…… 8 Remote Control…………………………………………………
Resumen del contenido incluido en la página 7
Getting Start Features Features Features ․ Support WXGA resolution up to 1366x768 pixels ․ Wide viewing angle ․ VESA DPMS-compliant power saving: automatically powers down the monitor after a defined period of inactivity ․ Digital Character Smoothing ․ Analog TV tuner ․ Windows 95/98/2000/XP Plug & Play Compliant ․ Versatile, User friendly OSD ․ Plug & Play: Conform to the VESA standards and support DDC 2B spec. Standard Accessories Standard Accessories Stand
Resumen del contenido incluido en la página 8
ANTENNA CONNECTIONS If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV (CATV) see “CABLE TV CONNECTIONS”. Combination VHF/UHF Antenna (Single 75 Ohm cable or 300 Ohm twin-lead wire) Connect the 75 Ohm cable from the combination VHF/UHF antenna to the Antenna Jack. If your combination VHF/UHF antenna has a 300 Ohm twin-lead wire, the use of the 300-75 Ohm Matching Transformer may be necessary.
Resumen del contenido incluido en la página 9
Front View Getting Start Location of Controls Location of Controls Location of Controls Operating the monitor Multicolor LED indicator illuminates in Green for operating PC monitor and Front Panel Buttons： TV system, Red when Power plug in (Standby). ① POWER：Press to active the Display On and Off (Standby). ② SOURCE：Press to display all of the available
Resumen del contenido incluido en la página 10
Rear View Getting Started REAR PANEL JACKS Side View 1 Y1Cb1Cr1 Connecting to the Video component1 output terminal of the video output device. Y1Cb1Cr1 Audio Audio input terminal connecting to the audio output terminal of the video output device. 2 3 Y2Pb2Pr2 Connecting to the Video component2 output terminal of the video output device. 4 Y2Pb2Pr2 Audio Audio input terminal connecting to the audio output terminal of the video output device. 5 S-video Y/C S-video input terminal connec
Resumen del contenido incluido en la página 11
Getting Start Remote Control Remote Control Remote Control TV Function 1 POWER Power On/Off 2 TV Switch source to TV mode. Select main input source: TV VGA DVI S-VIDEO AV1 AV2 3 SOURCE AV3 COMPONENT 1 COMPONENT 2 4 Number keys Select channel by numbers. 5 DISPLAY Display current information. 6 MUTE Turn speaker On or Off. 7 MTS Select the TV audio mode: MONO-> STEREO-> SAP. 8 SOUND Select the sound mode: Off-> SRS WOW-> BBE 9 PICTURE Adjust dis
Resumen del contenido incluido en la página 12
REMOTE CONTROL BATTERY INSTALLATION Slide the battery compartment cover. Install two “AAA” batteries (supplied), paying close attention to the + / - polarity diagram in the battery compartment. Replace the compartment cover. BATTERY PRECAUTIONS The precautions below should be followed when using batteries in this device: 1 Use only the size and type of batteries specified. 2 Be sure to follow the correct polarity when installing the batteries as i
Resumen del contenido incluido en la página 13
Installation Installing your Display Installing your Display Installing your Display Step 1. Positioning the display set Place your Display set on a solid stable surface. Do not expose the display to water, or a heat source. Do not obstruct the ventilation grid at rear. ANT Step 2. Connecting the aerials (Antenna) 1. Use the antenna adapter (included) to connect the Cable / Antenna to TV
Resumen del contenido incluido en la página 14
Installation SET UP SET UP SET UP If TV is connected to an antenna, you’ll need to set a few important items in the menu system the first time you turn on your Display. Auto scan: This part of the setup allows the TV tuner to search for all channels viewable though your antenna or cable TV system (when there is no cable box connected). Press “MENU” on Remote or TV’s front panel to view OSD- “TV Parameters”. Press button 3 times to highlight the fifth item “Ch
Resumen del contenido incluido en la página 15
Operation - TV Basic Operation Basic Operation Basic Operation Power On/Off Press the “POWER” key to turn ON the Display. The power indicator changes from red to green. When the power is OFF (stand by), the power indicator changes from green to red. Source select Press “SOURCE” button to select the input signal. Each time the source button is pressed, the on-screen display will cycle between: TV VGA
Resumen del contenido incluido en la página 16
Operation - TV OSD MENU DESCRIPTION OSD MENU DESCRIPTION OSD MENU DESCRIPTION To access MENU navigate and make adjustments, use MENU, CH, CH, VOL, VOL and ENTER. Pressing “MENU” display and the OSD menu. Use CH / CH on the remote controller to scroll the options on the menu. Press “ENTER” button to enter sub menu. Use / to adjust settings. Press “ENTER” to confirm desired settings. Press “MENU” to exit the current OSD menu. Main Menu:
Resumen del contenido incluido en la página 17
Operation - TV TV/PC Parameters TV/PC Parameters TV/PC Parameters TV Parameters Press “MENU” and make sure “TV Parameters” appears on the screen. Adjusting the TV setting: Brightness: Alters the brightness of the image. Contrast: Alters the ratio of light to darkness. Sharpness: Adjusts the sharpness of the color. Saturation: Alters the color saturation. Hue: Alters the color intensity. Color temp: Adjusts the color temperature of the picture. Three options are availa
Resumen del contenido incluido en la página 18
Operation - TV Audio Settings Audio Settings Audio Settings Press “MENU” and press to make sure the “AUDIO SETTINGS” is displayed on the screen. In TV, Video, and PC modes Adjusting the audio setting: Volume: This will adjust the level of volume. Mute: Mutes the sound Bass: This will adjust the level of low frequency content in the sound. (enabled only for BBE or SRS WOW feature is off) Treble: This will adjust the level of high frequency content in the
Resumen del contenido incluido en la página 19
Operation - TV Picture-In-Picture Picture-In-Picture Picture-In-Picture PIP function: With PIP function you can watch a multi-screen on the Display at the same time. To start the PIP function. PIP Off->PIP(Small) ->PIP(Medium) ->PIP(Large)-> PBP -> POP SOURCE To select the sub screen’s source. (see the PIP structure below) POSITION To adjust the PIP position. SWAP To switch the picture of main screen to sub screen. To freeze the PIP main screen. Freeze [Basic functio
Resumen del contenido incluido en la página 20
Operation - TV General Settings General Settings General Settings Press “MENU” and press to make sure “GENERAL SETTINGS” appears on the screen. In TV, Video, and PC modes Adjusting the general setting: OSD Timeout: Adjusts the OSD disappearing time without taking any action. Press / to increase or decrease the time. Timeout range: 10, 20, and 30 sec. OSD Position: Adjusts the horizontal and vertical position of the OSD
