Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
TO PREVENT POSSIBLE DANGER, ELECTRIC SHOCK, AND OTHER INJURIES WHEN HANDLING YOUR DISPLAY, PLEASE BE AWARE ALL WARNINGS AND SAFETY PRECAUTIONS CONTAINED AS BELOW. Never Insert anything into DISPLAY!! Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts. Never spill liquid of any kind on the Display。 Do not attempt to service the DISPLAY yourself!! Opening or removing covers may expose you to dangerous v
Resumen del contenido incluido en la página 3
CONFORMITY AND COMPLIANCE FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful in
Resumen del contenido incluido en la página 4
Table Table of contents of contents Introduction Thank you for purchasing the DGL3704 display set. This Flat-Screen LCD can be used either as a Television or as a computer monitor. With its multiple input options, you can connect almost any device (e.g. VCR, DVD players and game consoles) to this display. You can also connect your display to a stereo system with a subwoofer to experience the ultimate in home entertainment. This Manual has been designed to help you install and op
Resumen del contenido incluido en la página 5
Getting Start Features F Fe ea attu urre es s ˙ Supporting resolution of WXGA mode (1920x1080 pixels) ˙ Wide viewing angle ˙ Digital Character Smoothing ˙ Analog TV tuner ˙ Windows 95/98/2000/XP Plug & Play Compliant ˙ Versatile, functional & User friendly OSD ˙ Plug & Play: Conform to the VESA standards and support DDC 2B spec. Standard Accessories Standard Accessories Standard Accessories Unpacking and Checking of the Package Contents Before unpacking
Resumen del contenido incluido en la página 6
Front View Getting Started Controls and Functions C Co on nttrro olls s a an nd d F Fu un nc cttiio on ns s Operating the monitor Top Panel Buttons： LED indicator Green for operating PC monitor and TV system. Red when AC Power switch on or no signal. ① POWER：Press to turn the Display On/Off. (Main Power Switch must be On) NOTE: The Main Power
Resumen del contenido incluido en la página 7
Getting Started Rear View Rear Panel Jacks Side view Video Component1 Input terminal accepts video signal from a Component Video Source 1 Y1Cb1Cr1 (INTERLACED only) Y1Cb1Cr1 Audio L&R Audio input corresponding with Video Component1 2 Video Component2 Input terminal accepts video signal from a Component Video Source 3 Y2Pb2Pr2 (PROGRESSIVE SCAN or INTERLACED) 4 Y2Pb2Pr2 Audio L&R Audio input terminals corresponding with Video Com
Resumen del contenido incluido en la página 8
Getting Started Remote Control Remote Control Remote Control TV Function POWER Power On/Off (Standby) after turning On the Main Power Switch. TV Switch source to TV mode. Cycle through input sources: TV VGA DVI S-VIDEO AV1 AV2 SOURCE AV3 COMPONENT 1 COMPONENT 2 Also used for selecting the main source during PIP / PBP mode. DISPLAY Displays the current information. Number keys Selects TV channel directly by the nu
Resumen del contenido incluido en la página 9
Installation Installing your Display Installing your Display Installing your Display Step 1. Positioning the display set Place your Display set on a solid stable surface. To avoid danger do not expose the display to water, or a heat source. Do not obstruct the ventilation grid at rear. Step 2. Connecting the aerials ANT 1. Use for connecting the antenna or coaxial cable (75 Ohms) with TV Tuner
Resumen del contenido incluido en la página 10
Installation Quick Installation Quick Installation Quick Installation If TV is connected to an antenna, you’ll need to set a few important items in the menu system the first time you turn on your display. Auto scan: This part of the setup allows the TV tuner to search for all channels viewable though your antenna or cable TV system (when there is no cable box connected). Press “MENU” on Remote or TV’s front panel to view OSD “TV PARAMETERS” screen. Press button
Resumen del contenido incluido en la página 11
Operation - TV Basic Operation Basic Operation Basic Operation Power On/Off Press the “POWER” key to turn ON the Display. The power indicator changes from red to green. When the power is OFF (standby), the power indicator changes from green to red. Source select Press “SOURCE” to select the input signal. Each time the source button is pressed, the on-screen display will cycle between: TV VGA DVI
Resumen del contenido incluido en la página 12
Operation - TV OSD MENU DESCRIPTION OSD MENU DESCRIPTION OSD MENU DESCRIPTION To access MENU, navigate and make adjustments using; MENU、 CH、 CH、 VOL、 VOL and ENTER. Pressing “MENU” displays the OSD menu. Use CH / CH on the remote controller to scroll the options on the menu. Press “ENTER” button to enter sub menu. Use / to adjust settings. Press “ENTER” to confirm desired settings. Press “MENU” after adjustment is made, to revert to the next adjustment. Press “MEN
Resumen del contenido incluido en la página 13
Operation - TV TV/PC Parameters TV/PC Parameters TV/PC Parameters TV Parameters Press “MENU” and make sure the “TV Parameters” is shown on the screen. Adjusting the TV setting: Brightness: Alters the brightness of the image. Contrast: Alters the ratio of light to darkness. Sharpness: Adjusts the sharpness of the color. Saturation: Alters the color saturation. Hue: Alters the color intensity. Color temp: Adjusts the color temperature of the picture. Three options are ava
Resumen del contenido incluido en la página 14
Operation - TV Audio Settings Audio Settings Audio Settings Press “MENU” and make sure the “AUDIO SETTINGS” is displayed on the screen. In TV, Video, and PC modes Adjusting the audio setting: Volume: This will adjust the level of volume. Mute: Mutes the sound Bass: This will adjust the level of low frequency content in the sound. (Enabled only when BBE or SRS WOW feature is off) Treble: This will adjust the level of high frequency content in the sound. (En
Resumen del contenido incluido en la página 15
Operation - TV Picture-In-Picture Picture-In-Picture Picture-In-Picture PIP function: The PIP function allows you to watch two screens on the display from two different sources at the same time. For example; you can watch a TV channel and a component video source at the same time. See PIP structure chart below. Press: PIP To start the PIP function. Off->PIP(Small) ->PIP(Medium) ->PIP(Large)-> PBP -> POP SOURCE To select the sub screen’s source. (See the PIP structure b
Resumen del contenido incluido en la página 16
Operation - TV General Settings General Settings General Settings Press “MENU” and press to select “GENERAL SETTINGS”. In TV, Video, and PC modes Adjusting GENERAL SETTINGS: OSD Timeout: Adjusts the OSD elapsed time before disappearing after the last selection. Press / to increase or decrease the time. Timeout range: 10, 20, and 30 sec. OSD Position: Adjusts the horizontal and vertical position of the OSD on the screen.
Resumen del contenido incluido en la página 17
Operation - TV General Settings General Settings General Settings Deinterlace: Note: Only available in AV, S-Video, TV1, Component1 input sources. DCDI: This function produces smooth and natural images by minimizing staircasing or jaggies. CCS: This function (CCS) removes “false color” artifacts. FILM Mode: This function produces artifact-free images by proper handling of 3:2 and 2:2 pull-down video motion.
Resumen del contenido incluido en la página 18
For U.S. area only Operation - TV Parental Controls Parental Controls Parental Controls Closed caption: To aid the hearing impaired, Closed Caption is a system which displays a text of the voice dialogue of television programs. This feature uses onscreen text boxes to show conversation and dialogue while the program is in progress. Usually C.C. 1 is the most used. C.C. 2 may be used for alternate languages. Text function is usually used for channel guide, schedules, bulletin bo
Resumen del contenido incluido en la página 19
For U.S. area only Operation - TV Parental Controls Parental Controls Parental Controls V-chip: The V-chip feature automatically blocks TV programs and movies based on violence, sex, or other content you may believe inappropriate for children. Once you block programs, you can unblock by entering a password. Use remote control: 1. Press “V-Chip” key on the remote controller and the V-Chip OSD will be displayed on the screen. 2. Select the submenu: “Set Password”, “MPA
Resumen del contenido incluido en la página 20
For U.S. area only Operation - TV Parental Controls Parental Controls Parental Controls TV PG Rating (Parental Guideline) USA V-chip Rating System V-chip reads the program’s age-based rating. If you have blocked the rating, you will receive a rating message on the screen while you select the blocked program TV P.G. Rating None Unblock none TV-Y All children. none TV-7 Directed to children 7 years and older. The rating of F. Violence can be blocked
