Resumen del contenido incluido en la página 5
SAFETY PRECAUTIONS genuine Hayter replacement part. Safety Alert Symbol Preparation This safety alert symbol indicates important safety While mowing, always wear substantial footwear and long messages. When you see this symbol be alert to the trousers. Do not operate the equipment when barefoot or Operation possibility of injury. Carefully read the following and wearing sandals. Do not operate the engine in a confined space where inform others. exhaust fumes (carbon monoxide) can collect. Tho
Resumen del contenido incluido en la página 6
SAFETY PRECAUTIONS Operation cont Stop the engine and disconnect the spark plug lead: Allow the engine to cool before storing in any enclosure. Always ensure the blade has stopped, by releasing the - Before clearing blockages or unclogging the dis- engine stop lever, before tilting the mower for transport- charge chute. To reduce the fire hazard, keep the engine and the tation or crossing surfaces other than grass. - Before cleaning/checking or working on the ma- surrounding deck area free o
Resumen del contenido incluido en la página 7
ASSEMBLING THE MOWER / BEFORE STARTING THE MOWER the frame (1) into the grassbag (2), ensuring that the han- The oil level is correct when it is at the full mark on Delivery Checklist dle is above the grassbag as shown. Attach plastic clips the dipstick. DO NOT OVERFILL. (Refer fig.5) Remove the mower from the packaging and check that (A), (B), (C) and (D) to the grassbag frame. (Refer fig.3) the following items have been supplied correctly. If any items are missing contact, your local Hayte
Resumen del contenido incluido en la página 8
OPERATING THE MOWER damage. Controls Electric Start (Code 412 only) Operate all control levers several times and ensure that Stand behind the mower and hold the handlebar together the cables move freely. Check that the engine stop and with the engine stop lever. Turn the ignition key in a Reverse Travel ground drive clutch levers return freely to their rest clockwise direction and hold in position to crank the en- Release the ground drive clutch lever. Hold and pull position when released.
Resumen del contenido incluido en la página 9
OPERATING THE MOWER Slopes Grassbag Friction Disc To prevent engine damage do not use the mower on Raise the rear deflector and lift the grassbag and lower The cutterblade is driven by the engine via a friction the rear deflector to rest against the rear of the mower. slopes greater than 20 degrees. (Refer fig.12) disc to help prevent damage occurring to the engine crankshaft and cutting mechanism when a hidden To empty the grassbag, pour out the grass clippings and obstruction or overload
Resumen del contenido incluido en la página 10
OPERATING THE MOWER / MAINTENANCE SCHEDULE 25 Hours Or Every Season Non Grassed Areas - Change the engine oil if continuously operating under When moving the mower across non-grassed areas, stop heavy load or high ambient temperature. the engine and set the mower to the maximum height - Service the air cleaner. of cut to protect the cutting mechanism. (Refer fig.19) - Lubricate wheels, pivot points and linkages and grease Maintenance Schedule the inner control cables at point of entry and e
Resumen del contenido incluido en la página 11
MOWER MAINTENANCE the exhaust/exhaust guard, the air ways in the top cowl Carburettor Adjustments Air Cleaner Service and the surrounding deck areas on a daily basis after Should only be made by an authorised Briggs & Stratton To service the air cleaner, loosen screw (1) and remove use. Never spray the engine with water during cleaning. dealer. Under no circumstances should the engine be cover (2). (Refer fig.22) Water can contaminate the fuel. Always clean with a adjusted to run at a spe
Resumen del contenido incluido en la página 12
MOWER MAINTENANCE The condition of the cutterblade and its mounting Securing Nuts & Bolts Lubrication arrangement should be checked regularly for signs of Regularly check that all securing nuts and bolts are tight. Lubricate the wheels, pivot points and linkages with wear or damage. Ensure that the cutterblade is not bent Replace missing or damaged items immediately. engine oil every 25 operating hours. or cracked. Apply a good quality medium grease to the inner control cables at the point
Resumen del contenido incluido en la página 13
MOWER MAINTENANCE Engines stored in excess of 30 days need to be protected Cutterblade Sharpening with Briggs & Stratton fuel additive or drained of fuel to A slightly worn cutterblade may be re-sharpened. Both prevent gum from forming in the fuel system or on essen- blade edges must be sharpened equally to ensure balance. tial carburettor parts. To ensure your mower is maintained Sharpen the cutterblade every 25 mowing hours or more in good working order it is important that the followin
Resumen del contenido incluido en la página 14
MOWER MAINTENANCE connect the battery lead to the mower lead. (c) The consumer has a critical role in returning waste Battery Charging (Code 412 only) electronic/electrical equipment for recycling and disposal. - PREVENT ACCIDENTS: ALWAYS charge the IMPORTANT - PREVENT DAMAGE: NEVER battery in a well ventilated area. connect the battery charger to the engine lead as this (d) Recycling keeps these products out of the municipal will cause the charger to be permanently damaged. waste stream.
Resumen del contenido incluido en la página 15
LAWN CARE CALENDAR To be used as a guide only January June October There is very little work to do this month apart from Summer mowing should now be under way. It should be Rake out the thatch from the turf and spike the lawn to brushing away leaves. Keep off the grass if frozen or necessary to mow the lawn twice a week. Raking before assist in drainage. Brush in peat and sharp sand. mowing is important this month as the combined action waterlogged. keeps runners of clover under control. Wat
Resumen del contenido incluido en la página 16
TROUBLE SHOOTING PROBLEM CAUSES CORRECTIVE ACTION PROBLEM CAUSES CORRECTIVE ACTION Discharge chute blocks 1. Grass is wet 1. Mow dry grass 1. Engine stop lever released 1. Operate engine stop lever 2. Cut height is too low 2. Increase cut height Engine will not turn 2. Incorrect oil level 2. Check oil level 3. Grassbag full 3. Empty grassbag over 3. Obstruction under deck 3. Remove obstruction 4. Airflow through the grassbag 4. Clean the grassbag 4. Battery discharged (if fitted) 4. Charge batte
Resumen del contenido incluido en la página 17
NOTES WARRANTY LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of major proprietry components ie. engines, gearbox / transaxle (where applicable) furnish their own warranty and services are provided through their authorised network. To qualify for the full benefit of the warranty, the warranty regis
Resumen del contenido incluido en la página 18
NOTES NOTES 18 19
Resumen del contenido incluido en la página 19
NOTES NOTES 18 19
Resumen del contenido incluido en la página 20
CUSTOMER INFORMATION SERVICE RECORD CODE SERIAL NO. 1st Year (12 months) 1st Year (12 months) Owner’s Name: We certify that this service has been carried out by an Authorised Hayter Serial Number: Service Dealer Date: Date: Engine Type:- Engine:- Date of Sale:- Your Local Dealer:- Note for dealer: Please retain this voucher for your records. 2nd Year (24 months) 2nd Year (24 months) Owner’s Name: We certify that this service has been carried out by an Authorised Hayter Serial Number: Ser
Resumen del contenido incluido en la página 1
Harrier 41
CODES
410G, 412G, 413G
OWNER’S HANDBOOK
(English Version)
ISSUE: 04.09.09 PART NUMBER: 111-3161 (A)
Resumen del contenido incluido en la página 2
CONTENTS Contents 2 - Grassbag 9 - Without Grass Collection 9 Introduction 3 - Heavy Growth 9 - Friction Disc 9 Specifications / Main Features 4 - Non-Grassed Areas 10 - Maintenance Schedule 10 Safety Precautions 5 - 6 - Safety Alert Symbol 5 Mower Maintenance 11 - 14 - Training 5 - Carburettor Adjustments 11 - Preparation 5 - Oil Service 11 - Safety Symbols 5 - Air Cleaner Service 11 - Operation 5 - 6 - Spark Plug Service 11 - Maintenance & Storage 6 - Keeping Engine Clean 11 - Control Symbo
Resumen del contenido incluido en la página 3
INTRODUCTION Thank you for purchasing a Hayter mower. The following pages are designed to help you Use of non standard parts or any arbitrary modifications carried out on this machine may gain safe and efficient service from your machine. relieve Hayter Limited of liability for any resulting damage or injury. IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it Hayter mowers are robustly constructed and designed for efficient economical perform- gives essential inform
Resumen del contenido incluido en la página 4
SPECIFICATIONS / MAIN FEATURES Code 410 412 413 Engine Briggs & Stratton Briggs & Stratton Briggs & Stratton Engine type Series 650 Series 650 Series 650 Engine / Cutterbar Speed 2750 rpm 2750 rpm 2750 rpm Fuel type Unleaded petrol Unleaded petrol Unleaded petrol Fuel capacity 1.5 litres 1.5 litres 1.5 litres Oil type SAE 30 engine oil SAE 30 engine oil SAE 30 engine oil Oil sump capacity 0.6 litres 0.6 litres 0.6 litres Cutting width 480mm 480mm 480mm 12 Cutting height 13 - 60mm 13 -
