Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
(DECLARATION OF CONFORMITY PROCEDURE) Responsible Party: Yamaha Electronics Corporation, USA Address: 6660 Orangethorpe Avenue Buena Park, CA 90620 Telephone: 714-522-9105 Fax: 714-670-0108 Type of Equipment: CD Recordable/Rewritable Drive Model Name: CRW2200 CRW2200NB This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received including interferen
Resumen del contenido incluido en la página 3
Laser Product Class: Class 1 CAUTION Laser Diode Properties Use of controls or adjustments or performance of Wavelength: 780-787 nm procedures other than those specified herein may result Pulse Durations and Max. Output in hazardous radiation exposure. at the lens of the Laser Pickup Unit Read Mode: 0.7mW (Continuous) ACHTUNG Write Mode: Max. 38mW Halten Sie sich beim Bedienen und Einstellen der (for 166ns, Min. Cycle 86.6ns) Bedienungselemente sowie bei der Bedienungsabfolge an die An
Resumen del contenido incluido en la página 4
OWNER’S MANUAL i English
Resumen del contenido incluido en la página 5
SAFETY PRECAUTIONS PLEAS PLEAS PLEAS PLEASE E E E REA REA REA READ D D D C C C CAREFU AREFU AREFU AREFULLY B LLY B LLY B LLY BEFORE EFORE EFORE EFORE PROC PROC PROC PROCEEDING EEDING EEDING EEDING These precautions explain how to use the device correctly and safely, thereby preventing injury to yourself or to others. This section has been sub-divided into a WARNING section and a CAUTION section, according to the likelihood and nature of any potential injuries or damage inflicted. They relate
Resumen del contenido incluido en la página 6
CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to yourself or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following: l Always unplug the computer from the electrical outlet if it will not be used for a prolonged period of time, or if there is a risk of lightning. Otherwise, there is an increased risk of electrical shock, short-circuiting, or fire. l Do not expose the device
Resumen del contenido incluido en la página 7
n About CD-R/RW discs Please read the following regarding the handling of CD-R/RW discs. 1. Do not expose discs to excessive heat, such as in areas subject to direct sunlight or near a heater. Also, avoid keeping them in a humid place. 2. Do not touch the surface of a disc. When handling a disc, hold it by its edges. 3. Remove dust and dirt from the surface of a disc. Use air-based dust removers. The surface of a disc may be scratched if wiped with a dry cloth. 4. Do not stick labels on the su
Resumen del contenido incluido en la página 8
Table of Contents Introduction........................................................................ 1 Features of the CRW2200E Drive ...................................................... 1 Before Use ......................................................................... 3 System Requirements.......................................................................... 3 Supported Discs................................................................................... 4 Serial Number .........
Resumen del contenido incluido en la página 9
Introduction Features of the CRW2200E Drive High speed writing/reading *1 The CRW2200E drive supports up to 20X-speed writing of CD-R discs, and up to *2 10X-speed writing/rewriting of CD-RW discs. Furthermore, the drive supports data reading and digital audio data extraction at up to 40X speed. SafeBurn™ (Enhanced write stability technology) llll Generous 8MB of buffer memory Because of the large data storage area, stable disc writing is possible even at fast speeds. llll Buffer Underrun Pro
Resumen del contenido incluido en la página 10
Introduction *1 16X- or 20X-speed writing is enabled with the Partial CAV method. ( P. 5) *2 10X-speed writing/rewriting is enabled with the CLV method, and the 4X-10X Full CAV method. ( P. 6) Buffer Underrun Defined CD-R/RW drives are equipped with buffer memory. This memory temporarily stores data while a disc is being recorded. When buffer memory becomes empty (due to unexpected interruptions or the system’s inability to keep up with the writing process), a write error occurs. This err
Resumen del contenido incluido en la página 11
Before Use System Requirements In order to use the CRW2200E drive, your computer system will need to meet the following requirements. Note The CRW2200E drive may not write at the maximum speed depending on your computer’s system configuration. PC/AT-Compatible Computer CPU: Pentium II-class or higher, 300MHz or faster. RAM: 32MB memory (64MB or more recommended). Note If you are using Windows 2000 Professional operating system, you need 64MB memory or more. A vacant 5.25-inch drive bay slot (F
Resumen del contenido incluido en la página 12
Before Use Supported Discs The CRW2200E drive can write to discs that carry the following logos: *1 CD-R discs The CRW2200E drive can write to these discs at 1X, 2X, 4X, 8X, 12X, 16X, or 20X speed. These discs can be played back in a CD-ROM drive or a CD player. Notes • 16X- or 20X-speed writing is enabled with Partial CAV method. ( P. 5) • For 8X or faster writing, use CD-R discs that match their respective writing speeds. *2 CD-RW discs There are two types of CD-RW discs: those that supp
Resumen del contenido incluido en la página 13
Before Use About CD-ROMs A CD-ROM disc is a compact disc containing high-density read-only data. It has many applications, including the playback of music and video, the archiving of data, as well as on-line documentation. The following are descriptions of each CD-ROM format: CD-DA: Up to 79 minutes of stereo audio is written in 16-bit resolution at a sampling rate of 44.1kHz for a 79 minute disc. Data CD: Up to 700 megabytes of computer data is stored in standard ISO9660 format for a 700M
Resumen del contenido incluido en la página 14
Before Use About 10X-speed writing/rewriting of a High Speed CD-RW disc 10X-speed writing/rewriting of a High Speed CD-RW disc is enabled with the CLV method, and the 4X-10X Full CAV method. Commonly, writing/rewriting is enabled with the CLV method. When writing/rewriting with packet writing, you can also select the Full CAV method. For more details, refer to the documentation that came with your writing software. (Make sure that your writing software supports the Full CAV method. The suppl
Resumen del contenido incluido en la página 15
Front and Rear of Unit Front Panel The CRW2200E drive’s front panel features the following: ` ´ ˆ ˜ ¯ Disc tray The tray is used to hold the disc. It slides out from the drive unit when a disc needs to be loaded or unloaded. ( P. 28) ```` Manual Eject hole Only use this if no other method is available for unloading a disc. ( P. 29) ´´´´ Eject button Press this button when you need to open or close the tray. Remove the disc after the tray has opened. ( P. 28) ˆˆ Headphone jack ˆˆ
Resumen del contenido incluido en la página 16
Front and Rear of Unit Rear Panel The CRW2200E drive’s rear panel features the following: ` ´ ˆ ˜ DIGITAL AUDIO OUT connector If your sound card has a SPDIF (digital audio) input connector, you can connect the DIGITAL AUDIO OUT connector of the unit to the SPDIF connector using a digital audio cable (sold separately).( P. 22) ```` ANALOG AUDIO OUT connector Connect one end of the 4-pin audio cable to this and the other end to your computer’s sound card or built-in audio. ( P. 21) ´
Resumen del contenido incluido en la página 17
Setup Procedures Tools You will need the following tools at hand when installing the CRW2200E drive. Phillips Screwdriver You will need to use this when removing the cover of your computer and when mounting the drive. You may also need to temporarily remove the sound card to gain access to the CD audio connectors, in which case, a small screw retaining the sound card’s face plate has to be removed. Note Make sure your screwdriver’s head is the correct size for the screws you need to remove.
Resumen del contenido incluido en la página 18
Setup Procedures Setup Flowchart This flowchart shows the procedure for setting up the CRW2200E drive. For easy cross-referencing, the relevant pages in this manual are also given. STEP Connecting the CRW2200E Drive 1. Opening the Computer ( P. 11) 1 2. Choosing the Connecting Method ( P. 13) 3. Setting the Jumper Switches ( P. 17) 4. Installing the CRW2200E Drive ( P. 18) STEP Configuring the Operating System ( P. 25) 2 Check that the CRW2200E drive is recognize
Resumen del contenido incluido en la página 19
Setup Procedures Connecting the CRW2200E Drive This section explains how to connect the CRW2200E drive to a tower-type computer. Note The way of removing the casing or panel, or installing built-in devices may differ from your computer. Be sure to follow the procedures in the documentation that came with your computer. Opening the Computer 1 1 1 1 Power down your computer and unplug it from the AC outlet. If you proceed without doing this, you run the risk of receiving an electric shock and/or
Resumen del contenido incluido en la página 20
Setup Procedures 3 3 3 3 Touch a metal part of the computer’s chassis or power supply unit to discharge any static charge that may have built up inside your body. Alternatively, you can wear an anti-static grounding wrist strap. You can permanently damage Discharge any static charge equipment if you touch it while there is any static charge in your body. 12
