Resumen del contenido incluido en la página 1
P2 Professional
Instructions for Use
P 2
anti drip
PROFESSIONAL
320 ml
max
Resumen del contenido incluido en la página 2
IMPORTANT SAFETY INSTRUCTIONS When using your iron, basic safety precautions should always be followed, including the following: Read all instructions before using the iron. 1. Use iron only for its intended use. 2. To protect against a risk of electric shock, do not immerse the iron in water or other liquids. 3. The iron should always be turned to Minimum (Min) before plugging or unplugging from outlet. Never yank cord to disconnect from outlet, instead grasp plug and pull to disconnect. 4. Do
Resumen del contenido incluido en la página 3
SPECIAL INSTRUCTIONS 1. This is a 1440 watt appliance. To avoid a circuit overload, do not operate another high wattage appliance on the same circuit. 2. If an extension cord is absolutely necessary, a 12-ampere cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over. 3. Your Rowenta appliance is intended for household use only. SAVE THESE INSTRUCTIONS 3
Resumen del contenido incluido en la página 4
EF GH I J C/D K B A M L N Description: A Spray nozzle H Temperature control dial B Covered water filling inlet I Swiveling cord protector C Variable steam control J Supply cord D Self clean system K Temperature light (depending on model) L Transparent water tank E Spray button M Water level indicator F Burst of steam button N Stainless steel soleplate G Auto-off indicator light 4 P 2 anti drip PROFESSIONAL 320 ml max
Resumen del contenido incluido en la página 5
P 2 anti drip PROFESSIONAL 3m 20a m xl x f S ma el BEFORE USE Please read the instructions for use and the Important Safeguards very carefully. Slowly peel the protective cover off the soleplate or remove the transparent soleplate protector. It is normal for a small amount of smoke to be produced the first time the iron is used. This will quickly disappear. 3-WAY AUTO-OFF If the iron is not moved while it is plugged 30 sec. in, an internal safety switch will turn it off. It will turn o
Resumen del contenido incluido en la página 6
x f S ma el SELECTING THE TEMPERATURE Set the temperature control dial according to the type of fabric you are ironing. Check the fabric's label for appropriate setting. Laundry Fabric Temperature label setting synthetics e.g. viscose, polyester silk, wool cotton, linen To avoid an automatic switch off while the iron is heating up, always keep the iron on its heel. Start at low temperature and graduate to high temperature . For delicate fabrics we recommend carrying out a t
Resumen del contenido incluido en la página 7
P 2 anti drip PROFESSIONAL 320 ml max x f S ma el SPRAY SETTING Ensure there is water in the tank. Moistening the fabric with the spray will make wrinkle removal easier. Press the spray button down slowly for a jet or quickly and strongly for a mist. Do not spray silk, etc. BURST OF STEAM To remove stubborn wrinkles or press in a sharp crease, use the burst of steam button. Press the button firmly, a strong burst of steam penetrates deep into the fabric. Leave an interval of at
Resumen del contenido incluido en la página 8
P 2 anti drip PROFESSIONAL 320 ml max AFTER IRONING Unplug the iron. Slide the variable steam control completely to the left (the minimum position) and empty any water left in the tank. Leave the iron to cool down. Integrated cord wrap For easy storage, the cord can be wound loosely around the heel once the iron has cooled down completely. To protect the soleplate always store the iron on its heel. Important: Always empty the water tank when you have finished ironing! WATER TO
Resumen del contenido incluido en la página 9
x f S ma el SELF CLEANING Your iron is equipped with two self clean functions (depending on model). Do not use descaling a gents in your Rowenta iron. Vapodur Valve The patented Vapodur valve ensures that the opening which allows the water to drip from the water tank into the steam chamber of your iron remains unaffected by hard water deposits. To ensure your iron continues to steam efficiently the valve MUST be opened and closed a few times. This is done by moving the variable steam control
Resumen del contenido incluido en la página 10
CLEANING AND MAINTENANCE When cold and unplugged, the iron can be cleaned with a damp cloth and wiped dry. Never use household cleaners or solvents. Cleaning the soleplate Rowenta stainless steel soleplates have excellent non-stick properties and can simply be wiped clean when cold. In normal use a draggy coating may build up on the soleplate (starch, detergent buildup, burnt synthetic fibers). This can be easily removed by using the Rowenta Soleplate Cleaning Kit or a quality hot iron s
Resumen del contenido incluido en la página 11
IRON TROUBLESHOOTING Problem Possible cause Solution Iron is leaking. DISTILLED WATER DO NOT use 100% pure distilled water, use tap water. In very hard water areas mix half tap water with half distilled to reduce hardness; or use inexpensive bottled spring water. SOFTENED WATER Most softened water is alright, but if you experience leaks or spitting, change to untreated tap water or inexpensive bottled spring water. DO NOT use 100% distilled water. Auto-off activated? Move iron or gently shake.
