Resumen del contenido incluido en la página 1
OPEN (660) 120/140/150 II
12.1" /14.1" /15.1" TFT
® ®
Intel Celeron/Pentium III
Multimedia Open-frame Panel PC
User’s Manual (version 2.1)
Resumen del contenido incluido en la página 2
Copyright Notice This document is copyrighted, 2001 by the Manufacturer. The information provided in this document has been carefully checked and is accurate at the time of publication. However, the Manufacturer assumes no responsibility for any infringements of patents or other rights of third parties that may result from its use. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form of or via any means without the prior written permission of th
Resumen del contenido incluido en la página 3
Unpacking After unpacking the OPEN (660) system carton, check and see if the following items are included and in good condition. l OPEN (660) 120/140/150 II main system x 1 l Accessories - Power cord x 1 - External FDD cable x 1 - External IDE cable x 1 - External FDD & HDD power cable x 1 - User manual diskette in .pdf format x 1 - Utilities & drivers diskettes x 6 - Touchscreen drivers x 1 set or utilities and drivers CD diskette x 1 (for touchscreen drivers, please download the updated drive
Resumen del contenido incluido en la página 4
Important Safety Precautions Before getting started, read these instructions and save them for later reference. 1. Turn off the computer before cleaning. Clean with a damp or dry cloth only. Do not spray any liquid cleaner on screen directly. 2. The power outlet socket used to plug in the computer power cord must be located near the system and easily accessible. Do not use outlets on the same circuit of the systems that regularly switched on and off. 3. Make sure the voltage of the power sourc
Resumen del contenido incluido en la página 5
10. The openings on the computer enclosure are for the cabin ventilation to prevent the computer from overheating. DO NOT COVER THE OPENINGS. 11. The brightness of the flat panel display will decrease with use. However, hours of use will vary depending on the application environment. 12. If the computer is equipped with a touch panel, avoid using sharp objects to operate the touch panel. Scratches on the touch panel may cause mal- calibration or non-function to the panel. 13. The LCD panel disp
Resumen del contenido incluido en la página 6
Table of Contents 1. INTRODUCTION............................................. 1-1 1.1. GENERAL INFORMATION ..................................1-2 1.2. WHAT COVERS IN THIS MANUAL.........................1-3 1.3. SPECIFICATIONS...........................................1-5 1.4. DIMENSIONS ...............................................1-9 1.5. OPTIONAL MODULES & ACCESSORIES................1-11 1.5.1. Touchscreen Module .............................1-11 2. IDENTIFYING THE SYSTEM COMPONENTS... 2-13
Resumen del contenido incluido en la página 7
4. SYSTEM HARDWARE INSTALLATION ........... 4-37 4.1. INSTALLING THE CPU...................................4-39 4.2. INSTALLING THE SDRAM MEMORY MODULE ........4-40 4.3. INSTALLING THE HDD ..................................4-41 4.3.1. OPEN 120/140 2.5" HDD Installation ......4-41 4.3.2. OPEN 150 3.5" HDD Installation............4-42 4.4. INSTALLING THE FDD...................................4-43 4.4.1. External FDD connection .......................4-43 4.4.2. Internal FDD installation for OPEN
Resumen del contenido incluido en la página 8
6.2. LOCATING JUMPERS & CONNECTORS .................6-63 6.2.1. Jumpers & Jumper Setting.....................6-64 6.2.1.1. DOC 2000 Address Setting (JP9).......6-65 6.2.1.2. COM 2 RS-232/485 Setting (JP3,5,6) 6-65 6.2.1.3. CMOS Clear Setting (JP4) ................6-66 6.2.1.4. LCD Power Setting (JP1)..................6-66 6.2.2. Connectors & Pin Assignment.................6-67 6.2.2.1. CN12: Main Power Connector ...........6-68 6.2.2.2. CN2/IDE1: IDE Connector................6-69 6.2.2.3. CN3/CN
Resumen del contenido incluido en la página 9
8. SOFTWARE DRIVERS INTRODUCTIONS ..... 8-103 8.1. ETHERNET DRIVERS................................... 8-104 8.1.1. Features............................................ 8-104 8.2. OPEN (660) PCI XGA SETUP ................... 8-105 8.3. AUDIO SETUP .......................................... 8-106 8.4. DRIVER INSTALLATION................................ 8-107 9. TOUCHSCREEN........................................... 9-109 9.1. MICROTOUCH TOUCH DRIVER INSTALLATION...... 9-110 9.1.1. Two types of Mi
Resumen del contenido incluido en la página 10
Resumen del contenido incluido en la página 11
User Manual version 2.1 1. INTRODUCTION This chapter provides background information and detail specification on the OPEN (660) system. Sections in this chapter include; u General Information u What covers in this Manual u Specification u Dimension u Optional Modules & Accessories 1-1 OPEN (660) 120/140/150
Resumen del contenido incluido en la página 12
User Manual version 2.1 1.1. General Information The information revolution happened from the mid ’90 inaugurated a new competitive era where consumer computing technology was exploited to business operation more quickly than ever before. Many enterprises from our life related industries such as POS, POI, KIOSK, Banking, Medical to the high-tech Telecom, Aerospace, Semiconductor … etc. all are eager or forced to automate their industries with PCs in order to thrive in this new age. For their in
Resumen del contenido incluido en la página 13
User Manual version 2.1 1.2. What Covers in this Manual This handbook contains most information you need to set up and use this computer. You do not need to read everything in this handbook to use the OPEN (660) II system. For a quick start, see the following chapter summaries; Chapter 1 (the current chapter) provides background information and detail specification on the OPEN (660) 120/140/150 II. This chapter also details the optional modules and accessories of the OPEN (660) system. Chapter
Resumen del contenido incluido en la página 14
User Manual version 2.1 Appendix A details the 12.1”/14.1”/15.1” LCD specifications. Appendix B explains how to program the watchdog timer. Appendix C introduces the DiskOnChip installation. Appendix D introduces the system I/O ports. Appendix E explains the RS-485 programming. Appendix F explains the first MB memory map. Appendix G provides the specifications for the built-in power supply. 1-4 OPEN (660) 120/140/150
Resumen del contenido incluido en la página 15
User Manual version 2.1 1.3. Specifications SYSTEM Flat Panel u OPEN (660) 120: 12.1” color TFT, 800*600 Viewing angle 100 2 Luminance (cd/m ) 130 or above, optional high-brightness model Simultaneous mode yes u OPEN (660) 140: 14.1” color TFT, 800*600 Viewing angle 100 2 Luminance (cd/m ) 150 or above, optional high-brightness model Simultaneous mode yes u OPEN (660) 150: 15.1” color TFT, 800*600 Viewing angle 100 2 Luminance (cd/m ) 150 or above, optional high-brightness model Simultaneou
Resumen del contenido incluido en la página 16
User Manual version 2.1 Standard I/O u Serial Ports*4 with +5V/12V power output on pin 9: 3*RS-232, 1*RS-232/485 (COM2) u Parallel Port*1: supports SPP/EPP/ECP u External FDD Interface*1 u External IDE Interface*1 u +5V/+12V DC-out*1 u PS/2 Keyboard Interface*1 u PS/2 Mouse Interface*1 u USB Interface*2 u VGA Interface*1 u Speaker-out, MIC-in, Line in Ethernet 100/10 Base-T Ethernet with RJ-45 phone jack Watchdog Timer u 16 time intervals Display u LCD/XGA controller with 2MB display memory (C&T
Resumen del contenido incluido en la página 17
User Manual version 2.1 Power Supply u AC 85W, input range: 85~264VAC @47~63Hz u DC 90W, 9~132VDC (optional) (NOTE: when OPEN (660) 150 is installed with DC power, due to space limitation, the CD-ROM and floppy disk drive need to use external types) CD-ROM or DVD-ROM u OPEN (660) 120/140: via external IDE interface u OPEN (660) 150: slim type CD-ROM or via external IDE interface Floppy Disk Drive u OPEN (660) 120/140: via external FDD interface u OPEN (660) 150: slim type FDD or via external FDD
Resumen del contenido incluido en la página 18
User Manual version 2.1 u Front panel size (Aluminum frame) OPEN (660) 120A: 380*310 OPEN (660) 140A: 405*330 OPEN (660) 150A: 448*371 Mounting u Panel mount with mounting kits u To KIOSK enclosure Specifications are subject to change without notice. 1-8 OPEN (660) 120/140/150
Resumen del contenido incluido en la página 19
User Manual version 2.1 1.4. Dimensions The OPEN (660) system chassis size is shown below; Dimension: OPEN 120 (unit: mm) Dimension: OPEN 140 (unit: mm) 1-9 OPEN (660) 120/140/150
Resumen del contenido incluido en la página 20
User Manual version 2.1 Dimension: OPEN 150 (unit: mm) 1-10 OPEN (660) 120/140/150
