Instruction d'utilisation Epson Panamorph ELPALK2

Résumé du contenu de la page N° 1

PANAMORPH ELPALK2 CEILING MOUNT ANAMORPHIC LENS KIT

This kit is a customized version of the Panamorph AKPro attachment kit specifically intended for
use with the Epson PowerLite Pro Cinema 7500UB projector.

For both safety and performance, it is critical that the Chief RPA ceiling mount head
included in this kit be rigidly and strongly installed to support at least 250 pounds.
Consult a qualified installer for any additional hardware necessary.

SPECIAL NOTE ON CEILING MOUNT

Résumé du contenu de la page N° 2

ELPALK2 ATTACHMENT PLATE DIAGRAM WARNING! Use extreme caution and appropriate hardware when installing heavy objects to a ceiling. Periodically check all fasteners and connection hardware to be sure they are not coming loose. When installing or adjusting a ceiling mount, DO NOT use adhesives to prevent the screws from loosening and do not use oils or lubricants. If you apply adhesives to the mount to prevent the screws from loosening, or if you use lubricants or oil

Résumé du contenu de la page N° 3

STEP TWO - MOUNT THE MOTORIZED TRANSPORT: Position the flat side of the ATH Transport against the bottom side (projector side) of the Attachment Plate so that the Transport connector jacks are toward the projector Motorized Transport and the center “M” hole in the Attachment Plate is aligned with the front recessed Pivot screw as #10-32x5/8” screw (1) assembled transport hole. Insert the #10-32 x 5/8 #10-32 nut (1) pivot screw up through the Transport and Attachment Attachment Pl

Résumé du contenu de la page N° 4

result in the Panamorph anamorphic lens being below the center of the projector lens and tilted slightly downward. Tighten the knobs. c. Adjust the rotation of the Transport about the Pivot Screw so that the left and right sides of the image are an equal distance from their respective screen borders. Now tighten the Pivot Screw and the four #6 screws holding the Transport to the Attachment Plate. d. For optimum multiple aspect ratio performance, adjust the projector’s zoom so that

Résumé du contenu de la page N° 5

LIMITED WARRANTY Panamorph, Inc. warrants components in this ELPALK2 kit to be free of defects in original workmanship and material for a period of two years from the date of manufacture listed on or inside its shipping container. During this period, a defective unit may be repaired or replaced, at the discretion of Panamorph, Inc., by returning it in its original packaging with a copy of your receipt. This warranty does not cover damage resulting from lack of prudent care, accident o