Instruction d'utilisation Harbor Freight Tools 90416

Résumé du contenu de la page N° 1

RATCHETING STRAP CLAMP
FOR LAMINATE FLOORING
90416
ASSEMBLY & OPERATION INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this
product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
© ®
Copyright 2003 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this

Résumé du contenu de la page N° 2

SPECIFICATIONS ITEM DESCRIPTION Ratcheting Capacity 15’L X 1”W Reinforced Nylon Strap Body Construction Steel Plates Plate Holding Edge 5/16” X 5-1/8” Fixed Plate Dimensions 5-1/8” X 7-1/2” Rachet Plate Dimensions 4-3/4” X 5-1/8” Net Weight 2.25 Lbs. SAVE THIS MANUAL You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside o

Résumé du contenu de la page N° 3

8. CHECK FOR DAMAGED PARTS. Before using this product, carefully check that it will operate properly and perform its intended function. Check for damaged parts and any other conditions that may affect its operation. Replace or repair damaged or worn parts immediately. 9. REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only identical replacement parts. Only use accessories intended for use with this product. Approved accessories are available from Harbor Freight Tools. 10.

Résumé du contenu de la page N° 4

5. Feed the Strap (#2) through the slot in the Rachet (#3), and then through the center of the Rachet Barrel. See Figure 2. Caution: Be careful not to pinch fingers in moving parts. Center of Ratchet Barrel (A) Handle #2 Strap Slot in Ratchet Figure 2 6. Pull the end of the Strap (#2) to take up the slack. Tighten the flooring panels together by lowering the Handle (A) gently. Caution: Be sure you do not overtighten. The flooring panels must remain flat at all times. See Figure 3. (A) H

Résumé du contenu de la page N° 5

PARTS LIST PART # DESCRIPTION QTY 1 1 Metal Plate 2 1 Strap (yellow) A 1 Ratchet Handle B 1 Spring Plates PARTS ASSEMBLY #3 #2 A #1 B A B MAINTENANCE 1. For better and safer performance, keep all parts of this product clean and dry. 2. Periodically check to see that all hardware is in place. PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE