Résumé du contenu de la page N° 1
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
ITEM 69451
80 PIECE
Rotary Tool Set
When unpacking, make sure that the product is intact
Résumé du contenu de la page N° 2
SaFetY Setup OpeRatiOn maintenanCe t able of Contents Safety .................................................2 Maintenance ......................................10 Specifications .....................................7 Parts List and Diagram ......................11 Setup ..................................................7 Warranty ............................................12 Operation ............................................8 WaRninG SYmBOlS anD DeFinitiOnS This is the safety alert symbol
Résumé du contenu de la page N° 3
electrical safety 1. power tool plugs must match 3. Do not abuse the cord. never use the outlet. never modify the plug the cord for carrying, pulling or in any way. Do not use any adapter unplugging the power tool. Keep cord plugs with grounded power tools. away from heat, oil, sharp edges or Unmodified plugs and matching outlets moving parts. Damaged or entangled will reduce risk of electric shock. cords increase the risk of electric shock. 2. Do not expose power tools 4. if operatin
Résumé du contenu de la page N° 4
SaFetY Setup OpeRatiOn maintenanCe power tool use and care 1. Do not force the power tool. 5. maintain power tools. Check for use the correct power tool for your misalignment or binding of moving application. The correct power tool parts, breakage of parts and any will do the job better and safer at the other condition that may affect the rate for which it was designed. power tool’s operation. if damaged, have the power tool repaired before 2. Do not use the power tool if the use. Ma
Résumé du contenu de la page N° 5
8. WARNING: Some dust created by 9. WARNING: Handling the cord on this power sanding, sawing, grinding, product will expose you to lead, a drilling, and other construction activities, chemical known to the State of California contains chemicals known [to the State to cause cancer, and birth defects or of California] to cause cancer, birth other reproductive harm. Wash hands defects or other reproductive harm. after handling. (California Health & Some examples of these chemicals are: Safe
Résumé du contenu de la page N° 6
SaFetY Setup OpeRatiOn maintenanCe Grounding tO pRevent eleCtRiC ShOCK anD Death FROm inCORReCt GROunDinG WiRe COnneCtiOn: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Do not use the tool if the power cord or plug is damaged. if damaged, have it repaired by a service facility before use. if the plug will not fit the outlet, have a proper outlet installed by a qualified ele
Résumé du contenu de la page N° 7
Specifications Tool Input 12VDC Adapter Input 120V~ / 60Hz Rotation Speed 16,000 RPM Collet Size 1mm, 3mm, 3/32″, and 1/8″ Setup - Before use: Read the entiRe impORtant SaFetY inFORmatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Functions 1/8″ Shank with power Switch Buffing Wheel Collar lock Button accessories note: Refer to Parts List and Diagram on page 11 for accessory illustrations. • Use the Diamond Burr
Résumé du contenu de la page N° 8
SaFetY Setup OpeRatiOn maintenanCe Operating instructions Read the entiRe impORtant SaFetY inFORmatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. t ool Set up tO pRevent SeRiOuS injuRY FROm aCCiDental OpeRatiOn: t urn the power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before installing accessories. 1. Hold the Lock Button down 5. Insert the Accessory’s and unscrew
Résumé du contenu de la page N° 9
General Operating instructions 1. Plug the Power Adapter into a standard, 4. Contact the material lightly. Do not press grounded 120V electrical outlet. hard on the tool while working; allow the tool to work at its own pace. 2. Connect the Rotary Tool to It is better to make several shallow the Power Adapter. passes than to make one deep pass. 3. Turn the Power Switch “ON” and 5. To prevent accidents, turn off the tool and allow the Rotary Tool to come up to disconnect its power suppl
Résumé du contenu de la page N° 10
SaFetY Setup OpeRatiOn maintenanCe user-maintenance instructions procedures not specifically explained in this manual must be performed only by a qualified technician. tO pRevent SeRiOuS injuRY FROm aCCiDental OpeRatiOn: t urn the power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before any inspection, maintenance, or cleaning procedures. tO pRevent SeRiOuS injuRY FROm t OOl F ailuRe: Do not use damaged equipment. if abnormal noise or vibration
Résumé du contenu de la page N° 11
parts list and Diagram part Description Qty 1 Rotary Tool 1 2 Power Adapter 1 3 Collet 4 4 Diamond Burr Bit (3/32″ Shank) 20 5 Mounted Stone (3/32″ Shank) 10 6 Sanding Drum (3/32″ Shank) 2 6 7 Cut-off Wheel (1/8″ Shank) 25 8 Buffing Wheel (1/8″ Shank) 4 9 Wire Wheel (1/8″ Shank) 2 10 Whet Stone 1 11 Drill Bit (1mm, 3mm, 3/32″ & 1/8″) 4 7 1 8 2 9 3 4 10 11 5 Record product’s Serial number here: note: If product has no serial number, record month and year of purchase instead. note: Some parts are
Résumé du contenu de la page N° 12
limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installati
