ページ1に含まれる内容の要旨
OWNER’S INSTRUCTION
MANUAL
DECT 6
CORDLESS TELEPHONE
SYSTEM
1
ページ2に含まれる内容の要旨
Contents Unpacking and Installation ................................................................. 7 Box Contents ....................................................................................... 7 Telephone Part Identification .............................................................. 8 Installation .......................................................................................... 9 Desk Mount .................................................................................
ページ3に含まれる内容の要旨
Conference Call ................................................................................ 17 Transfer ............................................................................................. 17 Intercom Call ..................................................................................... 17 Volume Control ................................................................................. 17 Profile Menu ..............................................................................
ページ4に含まれる内容の要旨
THANK YOU FOR PURCHASING THE 6012 DECT 6 CORDLESS TELEPHONE We want you to know all about your new telephone, how to install it, the features it provides, and the services you can expect from its use. We have included this information in your Owner’s Instruction Manual. PLEASE READ BEFORE INSTALLING AND USING YOUR NEW TELEPHONE 4
ページ5に含まれる内容の要旨
Important Safety Instructions Always follow basic safety precautions when using your telephone to reduce the risk of fire, electical shock and injury. 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, laundry tub
ページ6に含まれる内容の要旨
instructions. Adjust only those controls that are covered by the operating instructions because improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. e. If the product has been dropped or cabinet has be damaged. f. If the product exhibits a distinct change in performance. 13. Avoid using a telephone during an electrical storm. There may be a risk of electrical shock from lightning. 14
ページ7に含まれる内容の要旨
Unpacking and Installation Box Contents The following items should be packed with your 6012. Please contact your dealer if any of them is missing. B a s e 1 H a n d s e t 1 P o w e r A d a p t e r 1 B e l t C l i p 1 L i n e C o r d 1 B a t t e r y 2 7
ページ8に含まれる内容の要旨
Telephone Part Identification 1 LCD 9 2.5 mm Headset Jack 2 CID Review/Volume Up 10 Hang Up Button 3 Esc/Flash Button 11 CID Review/Volume Down 4 Speaker Button 12 Dial Pad 5 Answer Button 13 Redial/Pause Button 6 Intercom/Transfer Button 14 Ring/Charge Indicator 7 Ok/Menu Button 15 Page Button 8 Phone Book Button 8
ページ9に含まれる内容の要旨
Installation Desk Mount 1. Connect the power adapter. The power adapter connects to the round jack on the bottom of the base. Plug the large part of the adapter into the wall outlet. Use only a 6V DC 350mA, center positive Class 2 adapter. 2. Connect the line cord. The line cord conncects to the telephone line jack on the bottom of the base. 3. Ensure that the batteries are installed in the handset by removing the battery cover. 4. Place the handset on the base. Wall Mount 1. Connect the p
ページ10に含まれる内容の要旨
Setup Menu Local Code 1. Press MENU. 2. Press CID/UP until SETUP is displayed. 3. Press MENU. LOCAL CODE is displayed. 4. Press MENU. 5. Enter your local area code (3 Digits) with the keypad. Any calls received from this area code will be displayed as 7 digits in caller ID. If you make a mistake, use the ESC/FLASH button to erase. 6. Press MENU to save the LOCAL CODE. Set Default Use this to return the unit to the original settings. 1. Press MENU. 2. Press CID/UP until SETUP is displayed. 3.
ページ11に含まれる内容の要旨
Time Format 1. Press MENU. 2. Press CID/UP until SETUP is displayed. 3. Press MENU. 4. Press CID/UP until TIME FORMAT is displayed. 5. Use CID/UP or Volume Down to toggle between 24 Hour and 12 Hour Format. 6. When the desired format is selected, press MENU. Change PIN Code Use this selection to change the PIN code that links the handset to the base. The default PIN code is 1234. 1. Press MENU. 2. Press CID/UP until SETUP is displayed. 3. Press MENU. 4. Press CID/UP until INPUT PIN is displayed
ページ12に含まれる内容の要旨
New Register 1. Press MENU. BASE UNIT is displayed. 2. Use CID/UP to select between Base 1 and Base 2. 3. Press MENU. INPUT PIN is displayed. 4. Use keypad to enter the 4 digit PIN. 5. Press MENU. Unit will begin registration. This may take up to 2 minutes. Select Base 1. Press MENU. 2. Use CID/UP to select between Base 1, Base 2 and Auto Select. 3. Press MENU. Deregister 1. Press MENU. INPUT PIN is displayed. 2. Use keypad to enter the 4 digit PIN. 3. Press MENU. Unit will deregister from
ページ13に含まれる内容の要旨
Unit Name 1. Press MENU. 2. Press CID/UP until SETUP is displayed. 3. Press MENU. 4. Press CID/UP until UNIT NAME is displayed. 5. Press MENU. 6. Use the keypad to enter the desired unit name. You may enter up to 8 characters. Use the ESC/FLASH button to erase if you make a mistake. 7. When the desired name is entered, press MENU. Recall Mode This setting changes the flash time of the unit. The choices are EXTRA LONG - 600 mSec, LONG - 300 mSec, and SHORT - 100 mSec. The standard flash time
ページ14に含まれる内容の要旨
Dial Mode Use this option to select TONE or PULSE dialing. The default setting is TONE. 1. Press MENU. 2. Press CID/UP until SETUP is displayed. 3. Press MENU. 4. Press CID/UP until DIAL MODE is displayed. 5. Press MENU. 6. Use CID/UP to select between TONE and PULSE. 7. Press MENU. Backlight Time Use this option to change the time that the display is lighted after coming off hook or pressing a key. 1. Press MENU. 2. Press CID/UP until SETUP is displayed. 3. Press MENU. 4. Press CID/UP until BA
ページ15に含まれる内容の要旨
Telephone Features Receiving a Call When the phone rings, remove the handset from the base and press the green ANSWER button or the SPEAKER button to answer the call. You may toggle between normal mode and SPEAKER mode by pressing the ANSWER button. Note: If the phone is configured for AUTO TALK ON, you will be connected as soon as the handset is lifted from the base. Placing a Call To place a call, remove the phone from the base and press the green ANSWER button or the SPEAKER button. After yo
ページ16に含まれる内容の要旨
Ringer You may choose from 20 ring tones. Detailed instructions for selecting a ring tone are given in the PROFILE MENU section. Redial There are two ways to redial the last number dialed. To redial immediately, press the ANSWER button or the SPEAKER button, and then press the REDIAL button. To review the number before redialing, press the REDIAL button first. The number to be dialed will appear in the dislplay. To dial this number press the ANSWER button or the SPEAKER button. To remove dig
ページ17に含まれる内容の要旨
Conference Call The 6012 can make a conference call between one outside party and two 6012 handsets registered to the same base. 1. Initiate a call to the outside party from one of the 6012 handsets. 2. Once the outside call is connected, press INT/TRF. 3. Dial the registration number of the second 6012 handset. 4. Once the second handset answers, press INT/TRF to create a conference call. Transfer The 6012 can transfer an outside call to any other handset registered to the same base. 1. Press I
ページ18に含まれる内容の要旨
Profile Menu This menu allows you to set the tones made by the phone. HS Ringer Music This selects the ringer tone. Ring tones can be assigned for up to five different groups. Numbers placed in these groups will then ring with that tone. 1. Press MENU. 2. Press CID/UP until PROFILE is displayed. 3. Press MENU. 4. Press MENU. The DEFAULT GROUP will be displayed. 5. Press CID/UP until the desired group is displayed. 6. Press MENU. 7. The current MELODY for that group will be displayed. Press CI
ページ19に含まれる内容の要旨
Page Tone This selects the tone played by the handset when the PAGE button on the base is pressed. There are four different page tones. 1. Press MENU. 2. Press CID/UP until PROFILE is displayed. 3. Press MENU. HS RINGER MUSICwill be displayed. 4. Press CID/DOWN until PAGE TONE is displayed. 5. Press MENU. The current page tone will be displayed. 6. Press CID/UP or CID/DOWN to select a tone. A sample of each tone will play as you change settings. 7. When the desired tone is selected, press M
ページ20に含まれる内容の要旨
Alarm 1/Alarm 2 The 6012 will allow you to set up to two alarm times. At this time, the ringer of the telephone will ring. 1. Press MENU. 2. Press CID/UP until FUNCTION is displayed. 3. Press MENU. NONDISTURB will be displayed. 4. Press CID/UP until ALARM 1 or ALARM 2 is displayed. 5. Press MENU. The current setting of the alarm will be displayed. 6. Press CID/UP to toggle between ON and OFF. 7. If the alarm is turned on, SET TIME will display and the alarm time will show in the lower right
